Please use this identifier to cite or link to this item:
https://dspace.iiti.ac.in/handle/123456789/12338
| Title: | Investigation on tribo-characteristics of electrochemical jet machined part manufactured by laser powder bed fusion |
| Authors: | Patel, Mahesh |
| Keywords: | Electrochemical jet machining;Laser powder bed fusion;Non-conventional machining;Surface finish;Wear |
| Issue Date: | 2023 |
| Publisher: | Elsevier Ltd |
| Citation: | Kumar, P., Chaudhary, B., Jain, N. K., Patel, M., & Dixit, P. (2023). Investigation on tribo-characteristics of electrochemical jet machined part manufactured by laser powder bed fusion. Tribology International. Scopus. https://doi.org/10.1016/j.triboint.2023.108766 |
| Abstract: | Electrochemical jet machining (ECJM) is a toolless electrochemical-based material removal process suitable for finishing the Laser powder bed fusion (L-PBF) manufactured parts. However, the investigation of the tribological characteristics of the finished part is unknown. Therefore, in this article, an investigation was made to evaluate the tribological characteristics of the electrochemical jet machined surface of SS316L part produced by L-PBF. The experimental results revealed improvement in the roughness parameters after the ECJM. The wear tests revealed that the friction coefficients (COF) of the finished samples were significantly lower in comparison to the as-manufactured samples. During the investigation, the dominating mechanisms of the wear were found to be adhesive and delamination wear. © 2023 Elsevier Ltd |
| URI: | https://doi.org/10.1016/j.triboint.2023.108766 https://dspace.iiti.ac.in/handle/123456789/12338 |
| ISSN: | 0301-679X |
| Type of Material: | Journal Article |
| Appears in Collections: | Department of Metallurgical Engineering and Materials Sciences |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Altmetric Badge: