Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/16866
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBehera, Sudhiren_US
dc.contributor.authorVelayutham, Ramamoorthyen_US
dc.contributor.authorSridharan, S.en_US
dc.contributor.authorMurugesan, Jayaprakashen_US
dc.date.accessioned2025-09-23T12:04:34Z-
dc.date.available2025-09-23T12:04:34Z-
dc.date.issued2025-
dc.identifier.citationBehera, S., Velayutham, R., Shah, A., Patel, M., Sridharan, S., & Murugesan, J. (2025). Ultrasonic vibration frequency as a governing mechanism for microstructure-property relationships in cold metal transfer-based wire arc directed energy deposited 316 L stainless steel. Journal of Materials Processing Technology, 345. https://doi.org/10.1016/j.jmatprotec.2025.119072en_US
dc.identifier.issn0924-0136-
dc.identifier.otherEID(2-s2.0-105015796626)-
dc.identifier.urihttps://dx.doi.org/10.1016/j.jmatprotec.2025.119072-
dc.identifier.urihttps://dspace.iiti.ac.in:8080/jspui/handle/123456789/16866-
dc.description.abstractIn wire-arc directed energy deposited (wire-arc DED) 316 L stainless steel, heterogeneous grain structures, porosity, and strength anisotropy have long been critical factors limiting performance. Recent studies have shown that ultrasonic vibration can refine microstructures and improve material properties, yet the influence of vibration frequency on melt dynamics, microstructure, fretting wear, and corrosion behaviour remains insufficiently explored. In this study, ultrasonic vibration (USV) at frequencies of 15, 25, and 40 kHz was applied during cold metal transfer (CMT)-based wire-arc arc directed energy deposition to systematically evaluate its effects. The results reveal that 25 kHz produced the finest average grain size (∼34 µm), significantly reduced Cr, Ni, and Mo segregation at grain boundaries, and enhanced structural homogeneity. This condition achieved the highest hardness (221 HV, +22 % over the without-ultrasonic vibration condition), improved ultimate tensile strength, and reduced tensile anisotropy by ∼29 %. Wear resistance and corrosion performance were also maximized at 25 kHz, whereas 40 kHz led to grain coarsening and degraded properties due to excessive heat input. Mechanistic analysis indicates that property improvements at the optimal frequency arise from three coupled effects: (i) grain refinement strengthening through vibration-enhanced nucleation, (ii) defect reduction via acoustic-driven melt stirring and porosity suppression, and (iii) enhanced corrosion resistance through uniform solute distribution and refined passive film formation. Beyond this case study, the findings establish ultrasonic frequency as a transferable process parameter for microstructural engineering, offering generic insights applicable to steels and other alloys with comparable melting behaviour. © 2025 Elsevier B.V., All rights reserved.en_US
dc.language.isoenen_US
dc.publisherElsevier Ltden_US
dc.sourceJournal of Materials Processing Technologyen_US
dc.subject316 l Stainless Steelen_US
dc.subjectCorrosionen_US
dc.subjectFretting Wearen_US
dc.subjectUltrasonic Vibrationen_US
dc.subjectWire Arc Directed Energy Depositionen_US
dc.subjectAnisotropyen_US
dc.subjectCorrosion Resistanceen_US
dc.subjectCorrosive Effectsen_US
dc.subjectDepositionen_US
dc.subjectFretting Corrosionen_US
dc.subjectGrain Boundariesen_US
dc.subjectGrain Refinementen_US
dc.subjectGrain Size And Shapeen_US
dc.subjectMicrostructureen_US
dc.subjectPorosityen_US
dc.subjectSteel Corrosionen_US
dc.subjectUltrasonic Wavesen_US
dc.subjectVibration Analysisen_US
dc.subjectWear Resistanceen_US
dc.subjectWireen_US
dc.subject316 L Stainless Steelen_US
dc.subjectCold Metal Transfersen_US
dc.subjectDirected Energyen_US
dc.subjectEnergy Depositionsen_US
dc.subjectFretting Wearen_US
dc.subjectMicrostructure-property Relationshipsen_US
dc.subjectUltrasonic-vibrationen_US
dc.subjectVibration Frequencyen_US
dc.subjectWire Arcen_US
dc.subjectWire Arc Directed Energy Depositionen_US
dc.subjectTensile Strengthen_US
dc.subjectUltrasonic Effectsen_US
dc.titleUltrasonic vibration frequency as a governing mechanism for microstructure-property relationships in cold metal transfer-based wire arc directed energy deposited 316 L stainless steelen_US
dc.typeJournal Articleen_US
Appears in Collections:Department of Metallurgical Engineering and Materials Sciences

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: