Please use this identifier to cite or link to this item:
https://dspace.iiti.ac.in/handle/123456789/19524
| Title: | Numerical study of flow dynamics past a rounded-corner rectangular cylinder in the vicinity of a plane wall |
| Authors: | Poojary, Suraj Suresh |
| Supervisors: | Shanmugam, Dhinakaran |
| Keywords: | Mechanical Engineering |
| Issue Date: | 27-May-2026 |
| Publisher: | Department of Mechanical Engineering, IIT Indore |
| Series/Report no.: | MT564; |
| Abstract: | Bluff bodies are characterized by flow separation, vortex shedding, wake formation and some hydrodynamic force parameters like Drag coefficient, Lift coefficient, Nusselt number, Strouhal number etc. which are usually dependent on geometric parameters and positioning of the body along its surroundings.In this current study, simulation is done on the viscous, unsteady, incompressible flow around a 2D rectangular cylinder with curved sides present close to a stationary wall in a laminar regime. The aim of this study is to give a better understanding about the effects of gap ratio along with its aspect ratio on the rectangular cylinder and flow parameters changing with it. A great influence on the wake structures forming around the body can be observed due to these two geometric parameters. The Reynolds number is taken to be 100 based on the inflow velocity and the width of the cylinder. Simulation is carried out for three aspect ratios (A/R=1,2 & 3) and gap ratios ranging from (0.1 to 4). Conditions are taken such that it helps in clearly observing the vortex shedding behaviour and a detailed analysis of wake formation can be done. Flow visualization parameters like vorticity distribution, streamlines, pressure fields and hydrodynamic forces like Strouhal number, Drag and Lift coefficient are calculated and presented in this paper. Influence of the stationary plate adjacent to the cylinder can be seen on the wake formation behind the cylinder. Also, alteration in the separation process can be seen for the bluff body considered although for higher gap ratios, a resemblance with isolated case can be seen. The parameters studied provide a quantitative nature of the flow behaviour. With change in aspect ratios, a change in geometry of the bluff body is aimed to achieve. Which in return also influences the flow just like change in gap ratios. |
| URI: | https://dspace.iiti.ac.in/handle/123456789/19524 |
| Type of Material: | Thesis_M.Tech |
| Appears in Collections: | Department of Mechanical Engineering_ETD |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| MT_564_Suraj_Suresh_Poojary_2402103068.pdf | 7.61 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Altmetric Badge: