Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/19525
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorDeshmukh, Devendra-
dc.contributor.authorKumar, Rupesh-
dc.date.accessioned2026-10-26T13:56:22Z-
dc.date.available2026-10-26T13:56:22Z-
dc.date.issued2026-06-27-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/19525-
dc.description.abstractThe shift towards the development of low-carbon energy systems has led to the growing interest in hydrogen fueled internal combustion engines as a potential alternative energy source compared to traditional gasoline and diesel engines. Some of the environmental benefits of using hydrogen fueled internal combustion engines include the possibility of reduced carbon emissions. However, due to the low molecular weight and high diffusivity of hydrogen fuel, leakage is more likely compared to other conventional fuels. One of the major leakage sources in internal combustion engines is through the piston ring pack, which leads to the blow-by phenomenon. Excessive blow-by can lead to the loss of combustion pressure, reduced thermal efficiency, contamination of the lubricating oil, and the accumulation of hydrogen in the crankcase, which can lead to potential safety issues. This study is concerned with the modeling and analysis of piston ring dynamics and blow-by in a hydrogen internal combustion engine using computational techniques. The comprehensive computational model is developed, including aspects of gas leakage modeling, piston ring dynamics, as well as thermal-structural analysis. The model is based on three main leakage sources in the piston ring assembly, including ring-liner clearance, piston ring end gap, as well as ring-groove side clearance.en_US
dc.language.isoenen_US
dc.publisherDepartment of Mechanical Engineering, IIT Indoreen_US
dc.relation.ispartofseriesMT565;-
dc.subjectMechanical Engineeringen_US
dc.titleModelling of piston rings & blow-by in hydrogen engineen_US
dc.typeThesis_M.Techen_US
Appears in Collections:Department of Mechanical Engineering_ETD

Files in This Item:
File Description SizeFormat 
MT_565_Rupesh_Kumar_2402103064.pdf1.99 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: