Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/5227
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBhatia, Vimalen_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-17T15:39:02Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-17T15:39:02Z-
dc.date.issued2018-
dc.identifier.citationSharma, S., Bhatia, V., & Gupta, A. (2018). An iterative transmitted reference UWB receiver for joint ToA and data symbols estimation. Paper presented at the IEEE International Conference on Communications, , 2018-May doi:10.1109/ICC.2018.8422288en_US
dc.identifier.isbn9781538631805-
dc.identifier.issn1550-3607-
dc.identifier.otherEID(2-s2.0-85051431325)-
dc.identifier.urihttps://doi.org/10.1109/ICC.2018.8422288-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/5227-
dc.description.abstractIn impulse radio ultra-wideband (IR-UWB) literature, simple transmitted reference (TR) autocorrelation receiver has been analyzed for data symbol detection. However, TR receiver is neither energy efficient nor data transmission rate efficient due to transmission of two pulses per data symbol. In this paper, we propose an iterative TR (ITR) UWB receiver for the joint time of arrival (ToA) and data symbol estimation. The proposed ITR receiver uses only single reference pulse for a burst of data symbols. The ITR receiver estimates a new reference pulse from the burst of data symbols' pulses to further enhance the signal-to-noise ratio (SNR) of UWB system. Hence, the proposed ITR receiver has high energy efficiency and data rate transmission efficiency with improved SNR as compared to a TR receiver. Further, the proposed ITR receiver is implemented at sub-Nyquist rate to overcome the high sampling rate analog-to- digital converter. The ITR receiver's ToA and data symbol estimation performance is analyzed for the binary phase shift keying modulated UWB system in standard IEEE 802.15.4a channels in the presence of additive white Gaussian noise. © 2018 IEEE.en_US
dc.language.isoenen_US
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.sourceIEEE International Conference on Communicationsen_US
dc.subjectAnalog to digital conversionen_US
dc.subjectBit error rateen_US
dc.subjectBroadband networksen_US
dc.subjectEnergy efficiencyen_US
dc.subjectGaussian noise (electronic)en_US
dc.subjectRadio receiversen_US
dc.subjectReceivers (containers)en_US
dc.subjectSignal receiversen_US
dc.subjectSignal to noise ratioen_US
dc.subjectTime of arrivalen_US
dc.subjectWhite noiseen_US
dc.subjectAdditive White Gaussian noiseen_US
dc.subjectAnalog to digital convertersen_US
dc.subjectAutocorrelation receiversen_US
dc.subjectData transmission ratesen_US
dc.subjectImpulse radio ultra wideband (IR-UWB)en_US
dc.subjectNyquist rateen_US
dc.subjectStandard IEEE 802.15.4aen_US
dc.subjectTRansmitted referenceen_US
dc.subjectUltra-wideband (UWB)en_US
dc.titleAn iterative transmitted reference UWB receiver for joint ToA and data symbols estimationen_US
dc.typeConference Paperen_US
Appears in Collections:Department of Electrical Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: