Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/5411
Title: Volume accumulated double gate junctionless MOSFETs for low power logic technology applications
Authors: Kranti, Abhinav
Keywords: Design;Low power electronics;Optimization;6T-SRAM;Double-gate MOSFETs;Intrinsic delay;Junctionless;Low Power;MOSFET devices
Issue Date: 2014
Publisher: IEEE Computer Society
Citation: Parihar, M. S., & Kranti, A. (2014). Volume accumulated double gate junctionless MOSFETs for low power logic technology applications. Paper presented at the Proceedings - International Symposium on Quality Electronic Design, ISQED, 335-340. doi:10.1109/ISQED.2014.6783345
Abstract: The work highlights the potential benefits of operating Junctionless (JL) Double Gate (DG) MOSFETs in the volume accumulation mode. An optimized 20 nm JL MOSFET in volume accumulation achieves impressive intrinsic delay value of 9 ps and on-off current ratio of ∼106 at a gate and drain bias of 0.4 V (subthreshold region). These values are significantly better than traditional JL MOSFETs designed with higher doping concentration (≥ 1019 cm-3). The maximum sensitivity of threshold voltage is limited to 3.5% for a 10% change in device parameters. The constraints for gate workfunction are less stringent in volume accumulated JL MOSFETs. A JL 6T-SRAM cell achieves an impressive read and hold noise margins of 156 mV and 364 mV along with a write-ability current of 20 μA at a supply voltage of 0.8 V. The paper presents new viewpoints for the design and optimization of junctionless transistors and circuits for low power logic technology applications. © 2014 IEEE.
URI: https://doi.org/10.1109/ISQED.2014.6783345
https://dspace.iiti.ac.in/handle/123456789/5411
ISBN: 9781479939466
ISSN: 1948-3287
Type of Material: Conference Paper
Appears in Collections:Department of Electrical Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: