1. IDR@IIT Indore
  2. IITI Scholarly Publications
  3. Department of Electrical Engineering
Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/5430
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAnthony, Rickyen_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-17T15:41:57Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-17T15:41:57Z-
dc.date.issued2012-
dc.identifier.citationAnthony, R., Lahiri, R., & Biswas, S. (2012). Design optimization of erbium-doped fiber ring laser for C and L band amplification incorporating chirped fiber bragg grating. Paper presented at the CODEC 2012 - 5th International Conference on Computers and Devices for Communication, doi:10.1109/CODEC.2012.6509300en_US
dc.identifier.isbn9781467326209-
dc.identifier.otherEID(2-s2.0-84877779915)-
dc.identifier.urihttps://doi.org/10.1109/CODEC.2012.6509300-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/5430-
dc.description.abstractThis paper presents simulation studies of an efficient Wavelength division multiplexed erbium doped fiber ring laser for high gain and low noise, in C band and extending up to L band region (1545-1615nm). An average gain of 33.10dB and noise figure of 7dB (maxima) has been reported on optimizing the system at -30dBm/channel input signal level, 150mW pump powers and amplifier lengths of 10m and 20m respectively at room temperature. The system has also been investigated for different fiber lengths, pump powers, input signal levels and temperatures. Inclusion of chirped fiber Bragg grating (CFBG) provided a uniform gain over 70nm with 0.2dB (p-p) variation. © 2012 IEEE.en_US
dc.language.isoenen_US
dc.sourceCODEC 2012 - 5th International Conference on Computers and Devices for Communicationen_US
dc.subjectC and L banden_US
dc.subjectChirped fiber Bragg gratingen_US
dc.subjectDesign optimizationen_US
dc.subjectErbium doped fiber ring lasersen_US
dc.subjectErbium doped fibersen_US
dc.subjectgain flatenningen_US
dc.subjectSimulation studiesen_US
dc.subjectWavelength division multiplexeden_US
dc.subjectCommunicationen_US
dc.subjectErbiumen_US
dc.subjectOptical communicationen_US
dc.subjectOptimizationen_US
dc.subjectRing lasersen_US
dc.subjectFibersen_US
dc.titleDesign optimization of erbium-doped fiber ring laser for C and L band amplification incorporating chirped fiber Bragg gratingen_US
dc.typeConference Paperen_US
Appears in Collections:Department of Electrical Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: