Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/6224
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSharma, Meghnaen_US
dc.contributor.authorSatyam D., Neelimaen_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-21T10:45:56Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-21T10:45:56Z-
dc.date.issued2021-
dc.identifier.citationSharma, M., Satyam, N., & Reddy, K. R. (2021). Rock-like behavior of biocemented sand treated under non-sterile environment and various treatment conditions. Journal of Rock Mechanics and Geotechnical Engineering, 13(3), 705-716. doi:10.1016/j.jrmge.2020.11.006en_US
dc.identifier.issn1674-7755-
dc.identifier.otherEID(2-s2.0-85104416551)-
dc.identifier.urihttps://doi.org/10.1016/j.jrmge.2020.11.006-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/6224-
dc.description.abstractMicrobially induced calcite precipitation (MICP) is a recently developed technique for microbiological ground improvement that has been applied for mitigating various geotechnical challenges. However, the major challenges, such as calcite precipitation uniformity, presence of different bacteria, cementation solution optimization for cost reduction, and implementation under non-sterile and uncontrolled field environment are still not fully explored and require detailed investigation before field application. This study aims to address these challenges of MICP to improve the geotechnical properties of sandy soils. Several series of experiments were conducted using poorly graded Narmada River (India) sand, which were subjected to various biotreatment schemes and tested for unconfined compressive strength (UCS), split tensile strength (STS), ultrasonic pulse velocity (UPV), hydraulic conductivity (after 6 d, 12 d, and 18 d of treatment), and calcite content. The microstructure of sand was examined through a scanning electron microscope (SEM). Initially, the sand was individually augmented with two non-pathogenic bacterial strains, i.e. Sporosarcina (S.) pasteurii and Bacillus (B.) sphaericus. The stopped-flow injection method was adopted to provide cementation solutions at three different durations (treatment cycle) of 12 h, 24 h, and 48 h and three different pore volumes (PVs) of 1, 0.75, and 0.5. The pore volume here refers to the porosity which is expressed as a ratio, i.e. a porosity of 50% was used as 0.5. The results showed rock-like behaviors of biocemented sand with the UCS, STS, and UPV enhancement up to 2333 kPa, 437 kPa, and 2670 m/s, respectively. The hydraulic conductivity reduction of 96.6% was achieved by 12% of calcite formation after 18 d of treatment using Sporosarcina pasteurii, 12-h treatment cycle, and one pore volume of cementation media in each cycle. Overall, a 24-h treatment cycle and 0.5-pore volume cementation solution were found to be the optimal treatment which was effective and economical to achieve heavily cemented, rock-type biocemented sand using both bacteria. © 2021 Institute of Rock and Soil Mechanics, Chinese Academy of Sciencesen_US
dc.language.isoenen_US
dc.publisherChinese Academy of Sciencesen_US
dc.sourceJournal of Rock Mechanics and Geotechnical Engineeringen_US
dc.subjectbacteriumen_US
dc.subjectcalciteen_US
dc.subjectcalcium carbonateen_US
dc.subjectgeotechnical propertyen_US
dc.subjectground improvementen_US
dc.subjectmicrostructureen_US
dc.subjectprecipitation (chemistry)en_US
dc.subjectsanden_US
dc.subjectsandy soilen_US
dc.subjectsoil stabilizationen_US
dc.subjectBacillus sphaericusen_US
dc.subjectBacteria (microorganisms)en_US
dc.subjectSporosarcina pasteuriien_US
dc.titleRock-like behavior of biocemented sand treated under non-sterile environment and various treatment conditionsen_US
dc.typeJournal Articleen_US
dc.rights.licenseAll Open Access, Gold-
Appears in Collections:Department of Civil Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: