1. IDR@IIT Indore
  2. IITI Scholarly Publications
  3. Department of Mechanical Engineering
Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/15490
Full metadata record
DC FieldValueLanguage
dc.contributor.authorThakur, Vinod Singhen_US
dc.contributor.authorM, Manikandanen_US
dc.contributor.authorSingh, Shalinien_US
dc.contributor.authorMishra, Shivamen_US
dc.contributor.authorKaithwas, Ankiten_US
dc.contributor.authorMani Prabu, S. S.en_US
dc.contributor.authorPalani, Anand Iyamperumalen_US
dc.date.accessioned2025-01-15T07:10:41Z-
dc.date.available2025-01-15T07:10:41Z-
dc.date.issued2020-
dc.identifier.citationThakur, V. S., Manikandan, M., Singh, S., Mishra, S., Kaithwas, A., Mani Prabu, S. S., & Palani, I. A. (2020). Laser Polishing of Wire Arc Additive Manufactured SS316L. In M. S. Shunmugam & M. Kanthababu (Eds.), Advances in Additive Manufacturing and Joining (pp. 127–135). Springer Singapore. https://doi.org/10.1007/978-981-32-9433-2_10en_US
dc.identifier.issn2522-5022-
dc.identifier.otherEID(2-s2.0-85104239744)-
dc.identifier.urihttps://doi.org/10.1007/978-981-32-9433-2_10-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/15490-
dc.description.abstractThis paper elucidates the surface analysis of laser polished SS316L samples fabricated using wire arc additive manufacturing (WAAM). The fabricated WAAM samples were polished using Nd: YAG laser source of wavelength 1064 nm at different power and the various number of passes such viz. 10 W, 10 W, and 25 W, and 8, 10, and 15, respectively. The roughness measurement was performed on before and after laser polishing by an optical profilometer and found that 40% of roughness was reduced after laser polishing. The crystal phase changes and hardness were also carried out and validated using XRD and hardness of the laser polished samples. © 2020, Springer Nature Singapore Pte Ltd.en_US
dc.language.isoenen_US
dc.publisherSpringer Natureen_US
dc.sourceLecture Notes on Multidisciplinary Industrial Engineeringen_US
dc.subjectLaser polishingen_US
dc.subjectOptical microscopyen_US
dc.subjectSS316Len_US
dc.subjectSurface roughnessen_US
dc.subjectWire arc additive manufacturingen_US
dc.titleLaser Polishing of Wire Arc Additive Manufactured SS316Len_US
dc.typeBook Chapteren_US
Appears in Collections:Department of Chemistry
Department of Mechanical Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: