| Issue Date | Title | Author(s) |
| 2025 | Laser scribed aluminum-polytetrafluoroethylene-based triboelectric nanogenerator as a self-energized vibration sensor for machine tool condition monitoring | Savaniya, Kaushik; Shiby, Sooraj; Jaurker, Diksha; Muthu, Manikandan; Joshi, Suhas S.; Iyamperumal Anand, Palani |
| 2025 | The memoir and the mediated self: the crafting and performance of Madhur Jaffrey’s persona in climbing the Mango Trees (2006) | Gangadharan, Meghna; Ghoshal, Ananya |
| 2025 | Experimental, analytical, and numerical analysis of clinched-assisted electromagnetic forming of AA1100 sheet | Mishra, Rakesh; Rajak, Ashish |
| 2025 | Corrosion and Wear Mechanisms in Surface Engineering | Sabiruddin, Kazi; Suman, Setu |
| 2025 | Enhancing Surface Performance of Non Equiatomic FeCoNiMnAl High-Entropy Alloy: Synergistic Effects of Deformation Path and Heat Treatment | Modanwal, Rajnish P.; Murugesan, Jayaprakash; Sathiaraj, G. Dan |
| 2025 | Laser-induced graphene-Embedded electrospun PVDF-ZnO: A synergistic piezo-tribo nanogenerator for efficient energy harvesting | Singh, Arpit; Anand, Palani Iyamperumal |
| 2025 | Realization of CuAlMn SMA and its functional behavior for cryogenic application | Patra, Nandini; Chouhan, Navneet; Singh, Vipul; Palani, Anand Iyamperumal |
| 2025 | Boosting the Performance of Organic Phototransistors Utilizing Oriented Thin-Films of Liquid Crystalline Conjugated Polymer PBTTT C-14 | Ramer, Sidhi G.; Palani, Anand Iyamperumal; Singh, Vipul |
| 2025 | Vibrational behavior of Stacked Boron Nitride/Graphene Heterogeneous Layers: A Comprehensive Atomistic Simulation Study | Choyal, Vijay K.; Kundalwal, Shailesh |
| 2025 | Investigating bacterial behavior through finite element analysis on nanostructured surfaces | Joshi, Suhas S. |
| 2025 | Experimental investigation on local heat transfer analysis of heated surface embedded with metal foam using circular orifice air-jet impingement | Singh, Pradeep Kumar; Sahu, Santosh Kumar |
| 2025 | High Strain Rate Electromagnetic Crimping on a Variation of Impact Target Geometry | Singh, Ummed; Rajak, Ashish |
| 2025 | Modelling and characterization of the thermo-mechanical behaviour of firtree roots in turbine disc assemblies | Kundalwal, Shailesh |
| 2025 | Microstructure, mechanical properties and phase transformation behaviour of directed energy deposition developed NiTixCu shape memory alloys | Negi, Balbir Singh; Jain, Neelesh Kumar; Sathiaraj, G. Dan |
| 2025 | Cutting-edge techniques for graphene oxide reduction: methods and applications | Kumar, Gopi; Mishra, Saurabh; Kundalwal, Shailesh |
| 2025 | Predictive Model for Deposition Success in Wire Laser Additive Manufacturing | Khan, Anas Ullah; Madhukar, Yuvraj Kumar |
| 2025 | High Strain Rate Electromagnetic Crimping on a Variation of Impact Target Geometry | Singh, Ummed; Rajak, Ashish |
| 2025 | Unequal-biaxial taut states of functionally graded dielectric elastomers | Khurana, Aman |
| 2025 | Uncertainty analysis of bending response of flexoelectric nanocomposite plate | Gupta, Madhur; Bansod, Pritesh Vishwasrao; Kundalwal, Shailesh |
| 2025 | Wrinkling stability in soft dielectric elastomers: The role of strain stiffening and stretch-dependent permittivity | Khurana, Aman |
| 2025 | Heterogeneous tailoring of stacked 2D structures with varying chirality | Choyal, Vijay K.; Kundalwal, Shailesh |
| 2025 | Optimizing Surface Finish and Material Removal Rate in Wire EDM of Zirconium-Based Bulk Metallic Glass Vitreloy 1: A Parametric, Elemental, Recast Layer, and Hardness Analysis | Barman, Siddhant S. |
| 2025 | Atomistic simulations of crack grain-boundary interactions in copper | Kundalwal, Shailesh |
| 2025 | Enhance the microstructure and mechanical properties of directed energy deposition-Arc (DED-Arc) stainless steel 308L using laser shock peening process | Geethapriyan, Thangamani; Anand, Palani Iyamperumal; Sahu, Anshu; Singh, Indrasen |
| 2025 | The effect of Strouhal number on the thermo-fluid performance of synthetic jet impingement with different waveforms | Mirikar, Dnyanesh; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2025 | VISIONARY: Novel Spatial-Spectral Attention Mechanism for Hyperspectral Image Denoising | Hosamani, Nischit; Gupta, Puneet |
| 2025 | Effect of strain path change in cold-rolling on the crystallographic texture, microstructure, and magnetic properties of FCC-based high entropy alloys | Modanwal, Rajnish P.; Murugesan, Jayaprakash; Sathiaraj, G. Dan |
| 2025 | Development and Characterization of Nickel-Based Self-Lubricating Electroless Composite Coatings Involving SiC and hBN | Nemane, Vaibhav; Misra, Debjit; Chatterjee, Satyajit |
| 2025 | Effect of tunneling conductivity of CNTs on the EMI shielding effectiveness of nanocomposite in the C-band | Modanwal, Rajnish P.; Gupta, Madhur; Kundalwal, Shailesh |
| 2025 | Effect of pore volume fraction on energy-harvesting capabilities of freeze-casted porous 0.63[Pb(Mg1/3Nb2/3)O3]–0.37[PbTiO3] ceramic | Dadhich, Ramanand; Chorma, Sumit; Singh, Indrasen |
| 2025 | Unraveling the Processing Parameters for Selective Positioning of Multi-materials Using Laser Decal Transfer | Singh, Arpit; Sahu, Anshu; Vyvaswath, K. A.; Pandiyan, Kailaash C.; Apalani, Palani Iyamperumal |
| 2025 | Influence of surface passivation aiming towards enhancing the performance of organic phototransistor fabricated using oriented thin films of PFO-DBT | Ramer, Sidhi G.; Palani, Anand Iyamperumal; Singh, Vipul |
| 2025 | Vibration and Support Vector Machine-Based Fault Diagnosis of Bevel Gearbox | Parey, Anand |
| 2025 | Early pitting fault detection for polymer gears using kurtosis-VMD based condition indicators | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2025 | Thermo-electro-magnetostrictive unequal-biaxial taut states in thin elastomeric membranes | Khurana, Aman |
| 2025 | Influence of Laser Texturing on Contact–Separation and Sliding-Mode Triboelectric Nanogenerator for Vibration Sensing | Jaurker, Diksha; Joshi, Suhas S.; Palani, Anand Iyamperumal |
| 2025 | CNN-based damage classification of soybean kernels using a high-magnification image dataset | Chauhan, Isparsh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2025 | Investigations on Influence of Micro and Nano Pulse Laser Source for µ-3D Printing of Ceramics Over Flexible Substrates for Functional Applications | Singh, Arpit; Sahu, Anshu; Iyamperumal, Palani Anand |
| 2025 | Performance Analysis of Ti and Cu Rich SMA-Coated Optical Fiber Sensors for Low and High-Temperature Condition Monitoring of Systems | Palani, Anand Iyamperumal; Patra, Nandini; Chouhan, Navneet; Singh, Vipul |
| 2025 | Modelling of powder catchment efficiency in micro-plasma transferred arc metal additive manufacturing process | Jain, Neelesh Kumar |
| 2025 | Influence of Laser Micromachining and Compositional Variation of NiTi on NiTi/Kapton Polyimide Bimorph Actuators for Opto-Mechatronics Applications | Gangwar, Kaushal; Apalani, Palani Iyamperumal |
| 2025 | An experimental investigation on the influence of Strouhal number and amplitude on the flow and heat transfer behavior of synthetic jet impingement | Sharma, Pawan Kumar; Mirikar, Dnyanesh; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2025 | Post-processing treatment of Wire Arc Additive Manufactured NiTi shape memory alloy using laser shock peening process: a study on tensile behavior and fractography analysis | Apalani, Palani Iyamperumal |
| 2025 | Realization of SMA bimorph based composite mirror and actuator in a Stewart platform arrangement for beam steering application | Gangwar, Kaushal; Parashar, Srijan; Apalani, Palani Iyamperumal |
| 2025 | Blockage detection in centrifugal pump using semi-supervised machine learning based on SVM and LSTM | Ranawat, Nagendra Singh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2025 | Design and development of low-weight and high-strength electromagnetic shielding nanocomposite in a microwave frequency range | Modanwal, Rajnish P.; Kundalwal, Shailesh |
| 2024 | One-Class SVM Using Domain-Based sEMG Features for Detection of Neuromuscular Disorders | Bhat, Vaidehi; Gaekwad, Varad; Kunte, Advay; Sreenivasan, Nambiar Anand; Pandit, Soham; Kumar, Hitendra; Pandhare, Vibhor |
| 2025 | Unveiling the dynamics of particle-reinforced electro-magneto-active circular membrane | Agrawal, Ankush; Khurana, Aman |
| 2024 | Active vibration control of laminated carbon nanotube-based polymer composite plates using finite element analysis | Gupta, Madhur; Kundalwal, Shailesh |
| 2025 | Optimization and Finite Element Analysis Simulation on Mechanical Behavior of Wire Arc Additive Manufacturing for SS316L Using Response Surface Methodology | Palani, Anand Iyamperumal |
| 2024 | GLiDR: Topologically Regularized Graph Generative Network for Sparse LiDAR Point Clouds | Bhat, Kshitij |
| 2024 | Carbon nanotube–based nanocomposite for effective electromagnetic interference shielding in aerospace applications: A finite element study | Dubey, Prakhar; Gupta, Madhur; Bansod, Pritesh Vishwasrao; Kundalwal, Shailesh |
| 2025 | Effects of Heat Treatment on Plasma-Sprayed Indian Clam Seashell-Derived Hydroxyapatite (HA) Coating Applied on Ti-Alloy | Hussain, Shahid; Sabiruddin, Kazi |
| 2025 | Post-processing treatment of Wire Arc Additive Manufactured NiTi shape memory alloy using laser shock peening process: a study on tensile behavior and fractography analysis | Apalani, Palani Iyamperumal |
| 2025 | Static and free vibration analysis of laminated composite hyperbolic paraboloidal shells using carrera unified formulation | Kundalwal, Shailesh |
| 2025 | Elucidating the impact of laser shock peening on the biocompatibility and corrosion behaviour of wire arc additive manufactured SS316L bone staples | Badhai, Jhasketan; Karthik, Sibi; Sonavane, Avinash; Apalani, Palani Iyamperumal |
| 2025 | Development and evaluation of machine-learned interatomic potentials for carbon nanotubes for molecular dynamics simulations | Mishra, Saurabh; Luhadiya, Nitin; Kundalwal, Shailesh |
| 2025 | Improvement in Process Efficiency of WAAM-TIG by In-Situ Voltage–Current–Temperature Monitoring and Feedback Control System | Kumar, Abneesh; Sadhya, Shubham; Madhukar, Yuvraj Kumar |
| 2025 | InceptionV3 based blockage fault diagnosis of centrifugal pump | Kumar, Deepak; Singh Ranawat, Nagendra; Kumar Kankar, Pavan; Miglani, Ankur |
| 2024 | Expert-in-Loop Digital Twin-based Decision Support System for Early Detection of Ventilator-Induced Lung Injury | Aarzoo; Ghosh, Atreyee; Pandhare, Vibhor; Bhattacharjee, Soumyabrata; Lad, Bhupesh Kumar |
| 2024 | SLACK: Attacking LiDAR-Based SLAM with Adversarial Point Injections | Bhat, Kshitij |
| 2025 | Gearbox fault detection using entropy-based feature extraction and hybrid classifier | Andhale, Yogesh Sahebrao; Parey, Anand |
| 2025 | Investigation of backing plate effects on the formability and fracture behaviour of AA1100 sheet in electromagnetic forming: Analytical, experimental and numerical analysis | Mishra, Rakesh; Rajak, Ashish |
| 2024 | Flow characterization of a submerged inclined impinging pulse jet | Mirikar, Dnyanesh; Yadav, Harekrishna |
| 2025 | Modified LinkNet and DenseNet-Based Hybrid Architecture for Combined Fault Detection in an Electromechanical System | Andhale, Yogesh Sahebrao; Parey, Anand |
| 2025 | Synthetic jet's flow-induced vibrations for enhanced thermal management and energy harvesting | Mirikar, Dnyanesh; Dinesh; Kumar, Rajat Sathish Dinesh; Patel, Satyanarayan; Yadav, Harekrishna |
| 2020 | Laser Polishing of Wire Arc Additive Manufactured SS316L | Thakur, Vinod Singh; M, Manikandan; Singh, Shalini; Mishra, Shivam; Kaithwas, Ankit; Mani Prabu, S. S.; Palani, Anand Iyamperumal |
| 2024 | Post-processing of wire-arc additive manufactured stainless steel 316 l bone staples using laser shock peening: a mechanical and antibacterial study | Geethapriyan, Thangamani; Badhai, Jhasketan; Karthik, Sibi; Sonavane, Avinash; Apalani, Palani Iyamperumal |
| 2025 | SANGAM: Synergizing Local and Global Analysis for Simultaneous WBC Classification and Segmentation | Srivastava, Adit; Ramagiri, Aravind; Gupta, Puneet |
| 2024 | Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay | Singh, Shalini; Palani, Anand Iyamperumal |
| 2019 | Comparative Investigation on the Effects of Laser Annealing and Laser Shock Peening on the As-Manufactured Ni–Ti Shape Memory Alloy Structures Developed by Laser Additive Manufacturing | Shiva, S.; Palani, Anand Iyamperumal |
| 2025 | Unravelling piezoelectric properties of novel C3N and C3B nanotubes: The first of its kind atomistic investigation | Sen, Dilip; Luhadiya, Nitin; Kundalwal, Shailesh |
| 2022 | Comprehensive review on polymer composites as electromagnetic interference shielding materials | Shahapurkar, Pavan |
| 2020 | Investigations on Synthesis of Porous NiTi Shape Memory Alloy Structures Using Selective Laser Melting Techniques | Sahu, Ankita; Palani, Anand Iyamperumal; Bhirodkar, Sachin Laxman |
| 2022 | A Comprehensive Review on the Advancement of Biogas Production Using Leftover Food and Kitchen Waste | Deshmukh, Devendra |
| 2023 | Fuzzy Recurrence Plots for Shallow Learning-Based Blockage Detection in a Centrifugal Pump Using Pre-Trained Image Recognition Models | Ranawat, Nagendra Singh; Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2023 | Internal Leakage Detection in Hydraulic Pump Using Model-Agnostic Feature Ranking and Ensemble Classifiers | Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2024 | Effect of Vacancy Defect on the Free Vibration of Some Noncarbon Nanomaterials: A Molecular Static Study | Singh, Sandeep |
| 2021 | On Abrasive Flow Finishing of Straight Bevel Gear | Petare, Anand C.; Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2023 | Identification of Tool Life Stages and Redressing Criterion for Polycrystalline Diamond Micro-Grinding Tools Using a Machine Learning Approach | Joshi, Suhas S. |
| 2022 | Investigations on the actuation behaviour of friction stir–welded nickel titanium shape memory alloy using continuous fibre laser | Mani Prabu, S. S.; Palani, Anand Iyamperumal |
| 2020 | Effect of Finishing Time on Surface Finish of Spur Gears by Abrasive Flow Finishing (AFF) Process | Petare, Anand C.; Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2020 | Lab Cooked MOF for CO2Capture: A Sustainable Solution to Waste Management | Panda, Debashis; Patra, Soumyadip; Awasthi, Mahendra Kumar; Singh, Sanjay Kumar |
| 2019 | Influence of Laser Shock Peening on Wire Arc Additive Manufactured Low Carbon Steel | M, Manikandan; Mani Prabu, S. S.; Jayachandran, Shanthi; Kumar, Akash; Palani, Anand Iyamperumal |
| 2020 | Influence of Perturbations on Actuation Characteristics of Friction Stir Welded Shape Memory Alloy | Mani Prabu, S. S.; Khan, Suhel; Jayachandran, Shanthi; M, Manikandan; Sai, Yeswanth; Anbarasu, M.; Palani, Anand Iyamperumal |
| 2022 | Energy storage systems: a review | Shanmugam, Dhinakaran |
| 2025 | Molecular modeling of hydrogen adsorption and mobility in transition metal-functionalized polycrystalline CNTs using an energy-centered approach | Mishra, Saurabh; Kundalwal, Shailesh |
| 2020 | Influence of Flow Domain Parameters on Hot Water Actuation of Shape-Memory Alloy Spring for Barrier Gate System | Nath, Tameshwer; Mani Prabu, S. S.; Palani, Anand Iyamperumal |
| 2020 | Fault Detection in Complex Mechanical Systems Using Wavelet Transforms and Autoregressive Coefficients | Kankar, Pavan Kumar |
| 2020 | Carbon fiber–reinforced nanocomposites: a multiscale modeling of regularly staggered carbon fibers | Kundalwal, Shailesh; Shingare, K. B. |
| 2020 | Performability considerations for next-generation manufacturing systems | Lad, Bhupesh Kumar |
| 2025 | A comparative study of coaxial and conventional synthetic jet heat transfer | Kumar, Rajat Sathish Dinesh; Kapadiya, Zen; Mirikar, Dnyanesh; Yadav, Harekrishna |
| 2020 | Sustainable Air-Conditioning | Khan, Rehan; Kumar, Ravinder |
| 2023 | Development of Ti-Ta-Nb-Mo-Zr high entropy alloy by μ-plasma arc additive manufacturing process for knee implant applications and its biocompatibility evaluation | Kumar, Pankaj; Jain, Neelesh Kumar; Jaiswal, Saumya; Gupta, Sharad |
| 2020 | Energy Needs for Sustainable Buildings and Transportation | Khan, Rehan; Deshmukh, Suchit; Kumar, Ravinder |
| 2019 | Study on Actuation Characteristics of NiTiCu SMA Thin Film Deposited on Flexible Substrate | Jayachandran, Shanthi; Brolin, A.; Harivishanth, M.; Kumar, Akash; Palani, Anand Iyamperumal |
| 2020 | Preface | Kankar, Pavan Kumar |
| 2024 | Advancements in 3D printing of functional materials for biomedical applications: challenges, opportunities, and case studies: a critical review | Goyal, Vipin; Verma, Girish Chandra |
| 2016 | Surface plasmon mediated optoelectronic property tuning of ZnO nanorods for UV sensing | Dixit, Tejendra; Palani, Anand Iyamperumal; Singh, Vipul |
| 2022 | Development of friction stir powder deposition process for repairing of aerospace-grade aluminum alloys | Chaudhary, Bhavesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2022 | Exploring temperature-controlled friction stir powder additive manufacturing process for multi-layer deposition of aluminum alloys | Chaudhary, Bhavesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2024 | An Industrial Scenario-Based Approach to Integrating Maintenance and Quality Planning | Purohit, Bhushan S.; Lad, Bhupesh Kumar |
| 2024 | Experimental Investigation to Study the Effect of Cryo-rolling on the Johnson–Cook Model Parameter of Al6061 | Verma, Rajat; Goyal, Vipin; Verma, Girish Chandra |
| 2025 | HR-TRACK: An rPPG Method for Heartrate Monitoring Using Temporal Convolution Networks | Birla, Lokendra; Shukla, Sneha; Saikia, Trishna; Gupta, Puneet |
| 2024 | An Innovative Laser Decal transfer of ZnO Ceramic in LIG for advanced Hybrid Nanogenerator applications | Singh, Arpit; Singh, Vipul; Apalani, Palani Iyamperumal |
| 2024 | Analysis of pyroelectric properties in quenched NBT-BT composition | Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Static, stress and free vibration analysis of composite conoidal shell using Carrera Unified formulation | Kundalwal, Shailesh |
| 2024 | Estimation of Heat Affected Zone in the Laser Surface Modification of Single-Crystal Nickel-Based Superalloy by Using a 3D Transient Heat Transfer Modelling | Joshi, Suhas S. |
| 2024 | Preface | Palani, Anand Iyamperumal |
| 2024 | Micromachining of NiTi SMA Composite Bimorph for Smart Actuators Using a CO2 Laser | Gangwar, Kaushal; Apalani, Palani Iyamperumal |
| 2025 | Experimental investigations into corrosion behaviour of DMLS manufactured Ti6Al4V alloy in different biofluids for orthopedic implants | Goyal, Vipin; Prasad, Nisheeth Kr; Verma, Girish Chandra |
| 2024 | High-temperature compression behaviour and phase analysis of additively manufactured Ti45V45Al5Cr5 medium-entropy alloy | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Sathiaraj, G. Dan |
| 2024 | Numerical analysis of the combined influence of fin shape and location on constrained melting of phase change materials in a spherical capsule with double fins | Sharma, Avadhesh Kumar; Saxena, Vivek; Sahu, Santosh Kumar |
| 2024 | Deriving inferences through natural language from structured datasets for asset lifecycle management | Bhattacharjee, Soumyabrata; Pandhare, Vibhor |
| 2024 | Enhancing the accuracy of blockage detection in centrifugal pump using the majority voting classifier on an unbalanced dataset | Ranawat, Nagendra Singh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2024 | Design and development of low-weight and high-strength electromagnetic shielding nanocomposite in a microwave frequency range | Modanwal, Rajnish P.; Kundalwal, Shailesh |
| 2024 | Non-invasive detection of hydraulic cylinder leakage using computer vision and time-frequency analysis | Prakash, Jatin; Singhal, Anjali; Miglani, Ankur |
| 2024 | Ultraviolet laser-induced fragmentation of hydrocarbon fuel droplets | Jagadale, Vishal Satish; Chorey, Devashish; Deshmukh, Devendra |
| 2024 | In-vitro study of Ti6Al4V alloy fabricated by laser-based additive manufacturing for orthopedic implant applications | Goyal, Vipin; Verma, Girish Chandra |
| 2024 | Tailoring pyroelectric and pyrocatalytic properties in NBT-6BT via Fe-doping | Gaur, Aditya; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Development of an In Situ 3D Profile Measurement System Using Laser Displacement Sensor for Parts through Reverse Engineering for Additive Manufacturing Applications | Barman, Siddhant S. |
| 2024 | Investigation of Fabricating Stainless Steel 304L Thin-Wall Structure Using Laser Marking-Assisted Wire Arc Additive Manufacturing Process | Geethapriyan, Thangamani; Pandiyan, C. Kailaash; Doloi, Sayan; Wagh, Ashwin; Tomar, Krishnapal; Apalani, Palani Iyamperumal |
| 2024 | Investigation of material ejection in laser decal transfer-based µ-3D printing of ZnO ceramics with microsecond pulsed CO2 laser | Sahu, Anshu; Singh, Arpit; Singh, Ayush; Singh, Vipul; Palani, Anand Iyamperumal |
| 2025 | Flow and heat transfer behavior of acoustically excited pulsating air jet impinging on a flat surface | Mirikar, Dnyanesh; Sharma, Pawan; Yadav, Harekrishna |
| 2024 | Impact of compliant electrodes on the dynamics of electromagnetoactive membranes | Khurana, Aman |
| 2024 | Strength-ductility synergy in a non-equiatomic Co–Cr–Ni medium entropy alloy wall structure deposited using twin-wire arc additive manufacturing | Deshmukh, Poonam S.; Goud, Rajendra; Sathiaraj, G. Dan |
| 2024 | Smart scheduling for next generation manufacturing systems: a systematic literature review | Chorghe, Shriprasad; Kumar, Rishi; Pandhare, Vibhor; Lad, Bhupesh Kumar |
| 2024 | Revealing the Impact of Composition on Oil Monitoring Performance of Ni-Ti-Cu Coated Optical Fiber | Chouhan, Navneet; Khan, Suhel; Patra, Nandini; Palani, Anand Iyamperumal; Singh, Vipul |
| 2024 | Behavior of free-standing atmospheric plasma sprayed Al2O3–Cr2O3 solid solution-based coatings under cyclic heating at 1000 °C | Suman, Setu; Sabiruddin, Kazi |
| 2024 | Pyroelectric performance of zinc oxide-added 0.94Na0.5Bi0.5TiO3–0.06BaTiO3 composite | Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Surface coating, texturing, and engraving of bioimplants | Sahu, Anshu; Palani, Anand Iyamperumal |
| 2024 | Energy Optimization in Induction Furnaces and Rolling Mills for Medium-Scale Industries Through Energy Efficient Power Conversion Systems and Best Operational Practices | Rajendran, Aneesh; Deshmukh, Devendra; Gupta, Nehal; Aswin, T. S.; Sharma, Vaibhav; Chundawat, Bhawani Singh |
| 2024 | The effect of increasing eccentricity and leakage on the performance of an axial piston pump | Pathak, Anurag; Sonkar, Neeraj; Gupta, Rishabh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2024 | Novel Selective Maintenance Approach to Ensure Mission Reliability of Armored Vehicles Considering Multiple Deployment Roles in Distinct Operating Profiles | Mohril, Ram S.; Majumdar, Joydeep; Lad, Bhupesh Kumar |
| 2024 | Impact of Aluminium and Titanium Additives on Ignition and Combustion in Boron-Loaded Gelled Jet A-1 Fuel | Miglani, Ankur |
| 2024 | Modelling of powder catchment efficiency in micro-plasma transferred arc metal additive manufacturing process | Jain, Neelesh Kumar |
| 2024 | Compliant frame geometry for DEMES-based gripper and flapping wing actuators: A comprehensive design study | Khurana, Aman |
| 2024 | Analyze the influence of nozzle shape and orientation on inline arrangement of multiple jets impingement on a concave surface | Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2024 | Investigation of Laser micro-textured triboelectric nanogenerator based self-powered vibration sensor for industry 4.0 application | Jaurker, Diksha; Gupta, Puneet; Sahu, Anshu; Joshi, Suhas S.; Palani, Anand Iyamperumal |
| 2024 | Surface modification methods of titanium (Ti)-based implant materials for biomedical applications | Hussain, Shahid; Sabiruddin, Kazi |
| 2024 | Influence of Cryogenic Coated Copper Tool Electrode in Electrochemical Micro Machining process of Stainless Steel 316 | Apalani, Palani Iyamperumal |
| 2024 | Investigation of laser-assisted micromachining of NiTi SMA bimorph based actuators toward developing optical shutters | Gangwar, Kaushal; Pandiyan, Kailaash C.; Iyamperumal Anand, Palani |
| 2024 | Effect of interlayer scan rotation on structure-property relationship of directed energy deposited CoCrNi medium entropy alloy | Deshmukh, Poonam S.; Sathiaraj, G. Dan |
| 2024 | Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Cox(CrNi)100-x alloy | Deshmukh, Poonam S.; Dan Sathiaraj, G. |
| 2024 | Microstructure and mechanical properties of additively manufactured Ti6Al4VxCryNi alloy | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Sathiaraj, G. Dan |
| 2024 | Enhanced CEEMDAN-Based Deep Hybrid Model for Automated Gear Crack Detection | Andhale, Yogesh Sahebrao; Parey, Anand |
| 2024 | Role of FSP in Surface Engineering | Suman, Setu; Sabiruddin, Kazi |
| 2024 | Metal-based Additive Manufacturing Technologies | Goyal, Vipin; Verma, Girish Chandra |
| 2024 | Semi-Supervised Approach Using Transductive Support Vector Machine for Internal Leakage Detection in Two-Stage Hydraulic Cylinder | Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2024 | Re-imagining Military Logistics—Reliability, Availability, Maintainability and Safety (ML-RAMS) with Intelligent, Interconnected, Digital and Distributed (I2D2) Technological Framework | Majumdar, Joydeep; Mohril, Ram S.; Lad, Bhupesh Kumar |
| 2024 | Reinforcement Learning for Mission Reliability Based Selective Maintenance Optimization | Mohril, Ram S.; Kudali, Tarun S.; Lad, Bhupesh Kumar |
| 2024 | Optimizing time in additive manufacturing: a hybrid fused deposition modeling and photopolymerization approach | Singh, Harsh Vardhan; Verma, Girish Chandra |
| 2024 | Internal Leakage Diagnosis of a Hydraulic Cylinder Using C-LSTM Neural Network | Kankar, Pavan Kumar; Miglani, Ankur |
| 2024 | Experimental Investigation on Temperature Monitoring Capability Of Ni-Ti-Cu Shape Memory Alloy Coated Optical Fiber in Oil | Chouhan, Navneet; Khan, Suhel; Patra, Nandini; Palani, Anand Iyamperumal; Singh, Vipul |
| 2024 | A numerical study on the effect of rib size and location on thermo-fluid performance of synthetic jet | Kapadiya, Zen; Mirikar, Dnyanesh; Kumar, Rajat; Yadav, Harekrishna |
| 2024 | Tribological and corrosion behaviour of non-equiatomic magnetic FeCoNiMnAl high entropy alloy | Modanwal, Rajnish P.; Murugesan, Jayaprakash; Sathiaraj, G. Dan |
| 2024 | Additive manufacturing of FCC-based high entropy alloys | Deshmukh, Poonam S.; Sathiaraj, G. Dan |
| 2024 | 3D printing parts: Mechanical characterization, applications, challenges, and techniques | Arya, Pradyumn Kumar; Kumar, Pankaj; Jain, Neelesh Kumar; Verma, Girish Chandra; Sathiaraj, G. Dan |
| 2024 | Fluid Dynamics Optimization of Microfluidic Diffusion Systems for Assessment of Transdermal Drug Delivery: An Experimental and Simulation Study | Shanmugam, Dhinakaran; Pandey, Divyam |
| 2024 | The effect of annealing on micro-hardness of molybdenum single crystals | Bhowmik, Manik; Dadhich, Ramanand; Singh, Indrasen |
| 2024 | MICP-Based Indian Desert Sand Stabilization | Dagliya, Monika; Neelima Satyam, D. |
| 2024 | Insights into the flow and heat transfer aspects of single and multi-orifice synthetic jets | Kumar, Rajat; Mirikar, Dnyanesh; Yadav, Harekrishna |
| 2024 | Experimental investigation of metal foam embedded surface thermal characteristics using air-jet impingement with different orifice geometry | Singh, Pradeep Kumar; Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2024 | Development of concurrent multi wire feed mechanism for WAAM-TIG to enhance process efficiency | Sadhya, Shubham; Khan, Anas Ullah; Kumar, Abneesh; Chatterjee, Satyajit; Madhukar, Yuvraj Kumar |
| 2024 | Role of buttering layer composition on microstructural heterogeneity and mechanical properties of Alloy 617 and P92 steel dissimilar welded joints for future Indian AUSC program | Singh, Vivek Kumar |
| 2024 | Digital twin-enabled robust production scheduling for equipment in degraded state | Pandhare, Vibhor |
| 2024 | Effect of nozzle configurations and jet orientations on thermal performance of jet impingement on convex surface | Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2024 | Welding and Joining of Novel Materials | Goud, Rajendra; Deshmukh, Poonam S.; Jain, Bhavesh; Dan Sathiaraj, G. |
| 2024 | Pyroelectric performance of tantalum doped NBT-6BT bulk ceramics | Gaur, Aditya; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Influence of thermocycling on the functional properties of the NiTi alloy produced by wire arc additive manufacturing | Anand Iyamperumal, Palani; Geethapriyan, Thangamani |
| 2024 | La implanted band engineering of ZnO nanorods for enhanced photoelectrochemical water splitting performance | Bimli, Santosh; Mulani, Sameena R.; Choudhary, Ekta; Miglani, Aayushi; Devan, Rupesh S. |
| 2024 | Lubricant depletion and interface dynamics in liquid-infused microchannel subjected to external oscillations | Joshi, Suhas S. |
| 2024 | Influence of waveforms on the heat transfer behavior of multi-orifice synthetic jet | Yadav, Harekrishna; Upadhyay, Prabhat Kumar; Sahu, Santosh Kumar |
| 2024 | Role of Natural Fiber-Based Composite on Wear and Friction Resistance | Modanwal, Rajnish P.; Sathiaraj, G. Dan |
| 2024 | A Few Suggestions to Improve Anti-drone Measures for Combating Against the Drone Menace | Verma, Girish Chandra |
| 2024 | Mitigating pressure fluctuations in a faulty axial piston pump using rearrangement of pistons | Gupta, Rishabh; Sonkar, Neeraj; Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2024 | Exploring the influence of lanthanum doping on pyroelectric and pyrocatalytic Characteristics in NBT-BT-2Zn ceramics | Gaur, Aditya; Saurabh, Nishchay; Upadhyay, Nitin; Patel, Satyanarayan |
| 2024 | Theoretical prediction of texture requirements for improving the intrinsic cleavage crack resistance of BCC Fe | Ghosh, Abhijit |
| 2024 | Investigations on Corrosion Behaviour of Surface Texturing on Ni45Ti55 Alloy Manufactured Using µ-Plasma Additive Manufacturing Process | Arya, Pradyumn Kumar; Jain, Neelesh Kumar |
| 2024 | Texture study of Ti64xCryNi alloys developed by μ-plasma additive manufacturing process | Arya, Pradyumn Kumar; Negi, Balbir Singh; Jain, Neelesh Kumar; Sathiaraj, G. Dan |
| 2024 | Revealing the impact of Hot Isostatic Pressing temperature on the microstructure and mechanical characteristics of Selective Laser Melted CuAlNiMn shape memory alloy | Palani, Anand Iyamperumal |
| 2023 | Flexoelectricity theories and modeling in ceramics | Patel, Satyanarayan |
| 2023 | Flexopyroelectricity in ceramics | Saurabh, Nishchay; Patel, Satyanarayan |
| 2023 | Flexoelectricity in SrTiO3-based ceramics | Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Improving the actuation behavior of nitinol shape memory alloys by nanosecond laser surface texturing | Palani, Anand Iyamperumal |
| 2023 | Flexoelectricity in ceramics composites | Patel, Satyanarayan |
| 2023 | Preface | Patel, S. R. |
| 2023 | Flexocaloric effect in ceramics | Patel, Satyanarayan |
| 2023 | Flexoelectric effect: ambiguities, controversies, and applications | Patel, Satyanarayan |
| 2023 | Flexoelectricity in Ceramics and Their Application | Patel, Satyanarayan |
| 2023 | Flexoelectricity in two-dimensional boron nitride and other materials | Patel, Satyanarayan |
| 2023 | Converse/inverse flexoelectric effect in ceramics | Patel, Satyanarayan |
| 2024 | Enhancing piezoelectric performance of CNTs through B and N substitution under combined mechanical loads: insights from MD simulations | Luhadiya, Nitin; Kundalwal, Shailesh |
| 2024 | Investigation on dual wire TIG Arc additive manufacturing of IN625 and SS316L FGM for continuous gradient and sandwich structures | Khan, Anas Ullah; Sadhya, Shubham; Bharath Kumar, Atluri; Chatterjee, Satyajit; Madhukar, Yuvraj Kumar |
| 2024 | Continuous and Pulse TIG Arc Treatment for Surface Hardening of WAAM-MIG Parts | Khan, Anas Ullah; Chatterjee, Satyajit; Madhukar, Yuvraj Kumar |
| 2024 | Bubble dynamics and atomization of acoustically levitated diesel and biodiesel droplets using femtosecond laser pulses | Jagadale, Vishal Satish; Deshmukh, Devendra; Mishra, Yogeshwar Nath |
| 2024 | Effect of Input Torque on the Modulation Sidebands of Planetary Gears in a Wind Turbine Gearbox Under Gravity Excitations | Dewangan, Palash; Parey, Anand |
| 2024 | A Comparative Study of Different Materials for Manufacturing of Miniature Spur Gears by Spark Erosion Wire Cutting Process | Jain, Neelesh Kumar |
| 2024 | NiTi�Cu Bimetallic Structure Fabrication through Wire Arc Additive Manufacturing | Singh, Shalini; Iyamperumal, Palani Anand |
| 2024 | Lattice Boltzmann modeling of buoyant convection in an enclosure with differentially heated porous cylinders | Shruti, B.; Shanmugam, Dhinakaran |
| 2024 | An experimental investigation on the influence of Strouhal number and amplitude on the flow and heat transfer behavior of synthetic jet impingement | Sharma, Pawan; Mirikar, Dnyanesh; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2024 | Forest hardening and Hirth lock during grinding of copper evidenced by MD simulations | Joshi, Suhas S. |
| 2024 | Analysis of laser-induced surface damage of single-crystal Ni-based superalloy towards improving machinability | Joshi, Suhas S. |
| 2024 | Experimental evaluation for detecting bevel gear failure using univariate statistical control charts | Parey, Anand |
| 2023 | An Intelligent Software Tool for Audio Signal-based Hinglish to English Language Translation | Dhavale, Amit Vikrant |
| 2024 | Synergic investigation of microstructure, precipitation, and micro-segregation on Inconel 825 weldments: A comparative study between GTAW and EBW | Singh, Vivek Kumar |
| 2024 | Analytical and experimental analysis of electromagnetic crimping of AA 1050 tube with CFRP tube using spiral coil | Singh, Ummed; Rajak, Ashish |
| 2024 | Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures | Singh, Shalini; Palani, Anand Iyamperumal; Kumar, Ajit |
| 2023 | ENHANCING THE PERFORMANCE MEASURES OF ELECTRICAL DISCHARGE MACHINING USING ADDITIVE MANUFACTURED COPPER TOOL ELECTRODE ON DRILLING TITANIUM ALLOY SPECIMENS | Thangamani, Geethapriyan |
| 2024 | Numerical Studies of the Influence of Strouhal Number on the Flow Characteristics of Synthetic Jet Impingement | Sharma, Pawan; Mirikar, Dnyanesh; Choudhary, Jitendra K.; Bokka, Raghuvamsi; Joshi, Jay; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2024 | Analysis of Li-ion battery under high discharge rate embedded with metal foam phase change composite: A numerical study | Saxena, Vivek; Sharma, Avadhesh Kumar; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2024 | Energy Storage Properties in Bulk Lead-Free Relaxor Ferroelectric Ceramics | Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Methods to Enhance the Pyroelectric Properties and Energy Harvesting | Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Simulation and experimental study of NBT-BT based compositions for thermal energy harvesting | Saurabh, Nishchay; Limbore, Sakshi; Kuldeep, Himanshu; Patel, Satyanarayan |
| 2024 | Noise effects, analysis and control in hospitals - A review | Parey, Anand |
| 2024 | Simulation study on the effect of operating and materials parameters on electrocaloric device for battery cooling | Rabadiya, Ridhamkumar; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Development of single-phase BCC refractory high entropy alloys using machine learning techniques | Naveen, L.; Umre, Priyanka |
| 2024 | Hydrogen sorption kinetics and mobility on Li-functionalized polycrystalline carbon nanotube bundles: A molecular dynamics study | Mishra, Saurabh; Kundalwal, Shailesh |
| 2024 | Logistics, Reliability, Availability, Maintainability and Safety (L-RAMS) for Intelligent, Interconnected, Digital and Distributed (I2D2) Empowered Futuristic Military Systems | Majumdar, Joydeep; Mohril, Ram S.; Lad, Bhupesh Kumar |
| 2024 | Early pitting fault detection for polymer gears using kurtosis-VMD based condition indicators | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2024 | An insight into India's Moon mission – Chandrayan-3: The first nation to land on the southernmost polar region of the Moon | Verma, Girish Chandra |
| 2024 | Tribological Behavior of Direct Metal Laser Sintering–Manufactured Ti6Al4V Alloy in Different Biofluids for Orthopedic Implants | Goya, Vipin; Verma, Girish Chandra |
| 2024 | Comparison between Different Optical Configurations of Active-FRAME Setup in Multispectral Imaging of Flames | Chorey, Devashish; Deshmukh, Devendra; Mishra, Yogeshwar Nath |
| 2024 | Corrosion behaviour of Ti6Al4VxCryNi alloys fabricated by μ-plasma arc powder additive manufacturing process | Arya, Pradyumn Kumar; Kumar, Pankaj; Negi, Balbir Singh; Jain, Neelesh Kumar; Sathiaraj, Dan |
| 2024 | TIG assisted surface finish enhancement in MIG-based wire arc additive manufacturing | Ullah Khan, Anas; Chatterjee, Satyajit; Madhukar, Yuvraj Kumar |
| 2024 | Thermal Characteristics of Synthetic Jet Impingement at Different Strouhal Numbers for Electronics Cooling | Sharma, Pawan; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2024 | Influence of Double Fin Shape on Constrained Melting of PCM in a Spherical Capsule: A Numerical Study | Sharma, Avadhesh Kumar; Joshi, Jaykumar; Saxena, Vivek; Sahu, Santosh Kumar |
| 2024 | Elastic properties and constitutive behaviour of graphene at finite temperature and large deformation | Raikwar, Akash; Singh, Sandeep |
| 2024 | Thermo-electro-mechanical effects on nonlinear dynamics of smart dielectric elastomer minimum energy structures | Khurana, Aman |
| 2024 | Heat and mass transfer characteristics of vertical falling film cylindrical plastic surfaces under partial wetting conditions for liquid desiccant regeneration | Khan, Rehan; Kumar, Ravinder |
| 2024 | Classification and Performance Enhancement of Solar Dryers | Gaur, Aditya; Patel, Satyanarayan |
| 2024 | Tribological characteristics of additively manufactured Ti6Al4VxCryNi alloys | Arya, Pradyumn Kumar; Kumar, Pankaj; Negi, Balbir Singh; Jain, Neelesh Kumar; Sathiaraj, Dan |
| 2024 | Experimental Investigation of Elliptical Air-Jet Impingement on Metal-Foamed Surface | Singh, Pradeep Kumar; Joshi, Jaykumar; Sharma, Pawan; Sahu, Santosh Kumar |
| 2024 | Understanding the Heat Transfer Characteristics and Axis Switching Phenomenon in High Aspect Ratio Elliptical Orifice Impinging Synthetic Jets | Sharma, Pawan; Bharadwaj, Prakhar; Bhat, Kshitij; Vyvaswath, K. A.; Dalal, Bhavya; Singh, Pradeep Kumar; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2024 | Thermal Performance Analysis of Cross-Finned Heat Sinks Using Nano-Enhanced Phase Change Material | Saxena, Vivek; Ziniwal, Harshit; Nagar, Gaurav; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2024 | Critical Thickness of the Phase Change Material (RT-42) for Temperature Management of 18,650 Li-Ion Cell Undergoing Rapid Discharging | Saxena, Vivek; Sharma, Avadhesh Kumar; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2024 | P(VDF-TrFE-CFE) polymer based electrocaloric device design for battery cooling | Rabadiya, Ridhamkumar; Korimilli, Eswara Prasad; Ch, Suryanarayana; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Pyrocatalysis-driven dye degradation by Zn Doped NBT-BT: A comparative analysis between powder and bulk | Gaur, Aditya; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Dynamic response of auxetic and functionally graded piezoelectric energy harvester using PVDF polymer | Gaur, Aditya; Meena, Santosh; Meena, Narendra; Saurabh, Nishchay; Patel, Satyanarayan |
| 2024 | Development of high strength and lightweight Ti6Al4V5Cr alloy: Microstructure and mechanical characteristics | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Sathiaraj, Dan |
| 2024 | Compositional influence of CuAlMn SMA coated optical fiber towards sensing low temperature | Patra, Nandini; Chouhan, Navneet S.; Singh, Vipul; Palani, Anand Iyamperumal |
| 2024 | Infrared active narrow bandgap Ni doped LaFeO3 nanoparticles for desalination and decontamination of water leveraging interfacial solar steam generation | Mulani, Sameena R.; Choudhary, Ekta |
| 2024 | Atomistic modeling of electromechanical properties of piezoelectric zinc oxide nanowires | Kundalwal, Shailesh |
| 2023 | Exploring the Influence of SiC Particles on Temperature Variations, Microstructural Evolution, and Mechanical Characteristics in the Friction Stir Processing of AA6061-T6 Plates | Suman, Setu |
| 2023 | Layered porous Na0.5Bi0.5TiO3-0.06BaTiO3 for enhanced pyroelectric thermal energy harvesting | Saurabh, Nishchay; Patel, Satyanarayan |
| 2023 | Influence of Substrate Temperature on Structure and Functional Properties of NiTi Walls Produced by WAAM | Palani, Anand Iyamperumal; Geethapriyan, Thangamani |
| 2023 | A New Automated Classification Framework for Gear Fault Diagnosis Using Fourier–Bessel Domain-Based Empirical Wavelet Transform | Ramteke, Dada Saheb; Parey, Anand; Pachori, Ram Bilas |
| 2023 | Online tool condition monitoring in micromilling using LSTM | Joshi, Suhas S. |
| 2024 | Comprehensive study of microstructure, phase transformations, and mechanical properties of nitinol alloys made of shape memory and superelastic wires and a novel approach to manufacture Belleville spring using wire arc additive manufacturing | Kumar, Ajit; Palani, Anand Iyamperumal |
| 2024 | In vitro bioactivity and biocompatibility behaviour of atmospheric plasma sprayed Indian clam seashell derived hydroxyapatite coating on Ti-alloy | Hussain, Shahid; Sabiruddin, Kazi; Patidar, Pramod; Solanki, Kundan; Baig, Mirza S. |
| 2023 | Machine Learning-Based Fault Prediction of Electromechanical System with Current and Vibration Signals | Parey, Anand |
| 2024 | Effect of strain rate on the hardness of relaxor ferroelectric PMN-0.32PT single crystals | Dadhich, Ramanand; Singh, Indrasen |
| 2023 | A NOVEL DECENTRALIZED APPROACH FOR PRODUCTION SCHEDULING | Chorghe, Shriprasad; Lad, Bhupesh Kumar |
| 2023 | Hard Metal-Matrix Composite Coating via Laser Cladding on Engineered Surfaces | Kumar, Pankaj |
| 2023 | A numerical investigation into thermo-fluid characteristics of pulsating jet impingement on a dimpled surface | Mirikar, Dnyanesh; Yadav, Harekrishna |
| 2023 | Recent Developments in the Area of Laser Cladding and Surface Alloying | Kumar, Pankaj |
| 2023 | Joining Techniques Like Welding in Lightweight Material Structures | Kumar, Pankaj |
| 2023 | Innovative Welding Technique for Lightweight Dissimilar Materials | Kumar, Pankaj; Arya, Pradyumn Kumar; Sathiaraj, Dan |
| 2023 | Experimental Study in Micro-drilling Mechanism on Heterogeneous Structure of Thermal Barrier Coated Inconel 718 Superalloy | Joshi, Suhas S. |
| 2024 | Effect of multiple protrusions on thermal performance of jet impingement with smooth concave surface | Joshi, Jaykumar; Sharma, Avadhesh Kumar; Sharma, Pawan; Sahu, Santosh Kumar |
| 2023 | Conductive polymer nanocomposite incorporated with carbon nanotubes for effective electromagnetic interference shielding: A numerical study | Dubey, Prakhar; Gupta, Madhur; Kundalwal, Shailesh |
| 2023 | Physics Behind High Strain Rate Powder Compaction | Vishwakarma, Tanuj; Janakiraman, S.; Rajak, Ashish |
| 2023 | Electromagnetic Joining of Aluminium Tube on Three Different Metal Cores Using Double Solenoid Coil | Rajak, Ashish |
| 2023 | Microstructure and Mechanical Characteristics of µ-Plasma Additively Manufactured Equiatomic Ti–Nb–Zr–Mo–Ta HEA | Kumar, Pankaj; Jain, Neelesh Kumar; Gupta, Sharad |
| 2023 | Mathematical modelling and validation of twist-free lead crowning of spur gears by pulsed electrochemical flank modification process | Rana, Vivek; Jain, Neelesh Kumar |
| 2023 | Development of analytical models for tip, root, and end relieving of spur gears by pulsed electrochemical finishing process | Rana, Vivek; Jain, Neelesh Kumar |
| 2024 | Effect of silicon carbide incorporation and heat treatment on tribological properties of electroless Ni–B–W alloy coating | Nemane, Vaibhav; Chatterjee, Satyajit |
| 2023 | INVESTIGATION OF MELTING OF PCM DISPERSED WITH NANOPARTICLES IN A SQUARE ENCLOSURE INTEGRATED WITH FINS SUBJECTED TO A UNIFORM MAGNETIC FIELD: A NUMERICAL STUDY | Sharma, Avadhesh Kumar; Saxena, Vivek; Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2023 | Repurposing welding waste stubs and wires as substrate in directed energy deposition processes | Khan, Anas Ullah; Madhukar, Yuvraj Kumar |
| 2023 | Characterisation of AZ31 metal matrix composites reinforced with carbon nanotubes | Palani, Anand Iyamperumal |
| 2023 | Unraveling spatial variations of graphenization of Kapton polyimide via CO2 laser interaction: a comprehensive theoretical simulation and Raman spectroscopy mapping study | Singh, Arpit; Sahu, Anshu; Apalani, Palani Iyamperumal |
| 2023 | Correction to: Post-processing of Wire Arc Additive Manufactured Stainless Steel 308L to Enhance Compression and Corrosion Behavior using Laser Shock Peening Process (Journal of Materials Engineering and Performance, (2023), 10.1007/s11665-023-08592-z) | Thangamani, Geethapriyan; Palani, Anand Iyamperumal; Singh, Mayank K.; Rai, Dhirendra Kumar |
| 2023 | Exploiting the Potential of Pyroelectric–Piezoelectric Hybrid Devices for Low-Grade Thermal Energy Harvesting | Gaur, Aditya; Saurabh, Nishchay; Patel, Satyanarayan |
| 2023 | BIOCOMPATIBILITY AND MECHANICAL BEHAVIOUR STUDIES ON WIRE-ARC ADDITIVE MANUFACTURED STAINLESS STEEL 316L AND SHAPE MEMORY ALLOY (NITI) MATERIALS FOR BIOMEDICAL IMPLANTS | Geethapriyan, Thangamani; Badhai, Jhasketan; Karthik, Sibi; Sonavane, Avinash; Palani, Anand Iyamperumal |
| 2023 | IMPACT OF PROCESS PARAMETERS ON LASER BEAM MACHINING OF CERAMIC MATERIAL | Geethapriyan, Thangamani; Pandiyan, Kailaash C.; Palani, Anand Iyamperumal |
| 2023 | Progress in solid-state additive manufacturing of composites | Chaudhary, Bhavesh; Patel, Mahesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2023 | Influence of CNT waviness on the effective young's modulus of multiscale hybrid composite | Gupta, Madhur; Kundalwal, Shailesh |
| 2024 | Ply-Blocking Phenomenon and Hole Size Effects in Modeling Progressive Damage in Fiber-Reinforced Plastics Laminates | Joshi, Suhas S. |
| 2023 | Non-contact flank modifications of spur gears using cathodic gear tools and mechanisms: an experimental study | Rana, Vivek; Jain, Neelesh Kumar |
| 2023 | EXPERIMENTAL INVESTIGATION OF AIR-JET IMPINGEMENT COOLING USING FLAT PLATE EMBEDDED OPEN-CELL METAL FOAM | Singh, Pradeep Kumar; Joshi, Jay; Sharma, Pawan; Sahu, Santosh Kumar |
| 2023 | Thermal characteristics of metal foamed flat plate with circular and elliptical impinging jets | Singh, Pradeep Kumar; Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2023 | EFFECT OF PROTRUSIONS ARRANGEMENTS ON THE THERMAL PERFORMANCE OF JET IMPINGEMENT COOLING FOR A CURVED SURFACE | Joshi, Jaykumar; Sharma, Pawan; Sahu, Santosh Kumar |
| 2023 | Thermal characteristics of a novel non-return valves equipped synthetic jet impingement: An experimental investigation | Sharma, Pawan; Joshi, Jaykumar; Mirikar, Dnyanesh; Singh, Pradeep Kumar; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2023 | The interaction of a droplet with an immiscible deep liquid pool for density ratio greater than unity | Shivankar, Shrirang; Miglani, Ankur |
| 2023 | Effect of teeth modifications and gear-paired materials on vibration and acoustic characteristics of polymer gears | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2023 | Multi-faults diagnosis of gearbox by deep convolution neural network | Kankar, Pavan Kumar |
| 2023 | Health prediction of reciprocating endodontic instrument based on the machine learning and exponential degradation models | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2023 | Microstructural Analysis and Integrity of Drilling Surfaces on Titanium Alloy (Ti–6Al–4V) Using Heat-Sink-Based Cryogenic Cooling | Joshi, Suhas S. |
| 2023 | An experimental investigation on the thermal behavior of synthetic jets involving non-circular orifices with varying wave patterns | Upadhyay, Prabhat Kumar; Yadav, Harekrishna; Sahu, Santosh Kumar |
| 2023 | Time-dependent plastic behavior of bacteria leading to rupture | Joshi, Suhas S. |
| 2023 | The characterization of disruptive combustion of organic gellant-laden ethanol fuel droplets | Sharma, Janmejai; Miglani, Ankur |
| 2023 | Influence of Laser Wavelength in Simultaneous Patterning of Fluorinated Ethylene Propylene and Copper Electrode Surface Towards Performance Enhancement of Triboelectric Nanogenerator | Shiby, Sooraj; Kaushik, Savaniya; Gupta, Puneet; Singh, Vipul; Palani, Anand Iyamperumal |
| 2023 | Experimental and numerical study on friction stir processing of Al0.3CoCrFeNi high entropy alloy | Reddy, Chandraprakash Ramchandra; Arya, Pradyumn Kumar; Sathiaraj, G. Dan; Patel, Vinay Kumar |
| 2023 | Investigations on the Effect of Laser Texturing of Kapton Polyimide on the Piezoelectric Response of ZnO-Based Nanogenerators | Purabiarao, Nisarg Hirens; Lahane, T. K.; Agarwal, Jitesh; Sahu, Anshu; Singh, Vipul; Palani, Anand Iyamperumal |
| 2023 | PAVeDS: A Synthetic Dataset for Developing Autonomous Personal Aerial Vehicles | Prasad, Deepak; Thanmai, Kondru; Banda, Gourinath |
| 2024 | Performance Analysis of N-Beats and Regression Learners for Wind Speed Forecasting and Predictions | Prakash, Jatin; Kankar, Pavan Kumar; Miglani, Ankur |
| 2023 | Influence of flexoelectric effect on the bending rigidity of a Timoshenko graphene-reinforced nanorod | Nevhal, Subhash K.; Gupta, Madhur; Kundalwal, Shailesh |
| 2023 | Molecular Hydrogen Storage in Stone–Wales Defected Single-Walled Carbon Nanotubes Using Molecular Dynamics Simulation | Mishra, Saurabh; Kundalwal, Shailesh |
| 2023 | Role played by phonon drag on accuracy of MD simulations of nanowires due to deficiently selected strain rates | Kundalwal, Shailesh |
| 2023 | The role of microstructure modifications on electrochemical and plasma-nitriding behaviour of 316L steel produced by laser powder bed fusion | Kumar, Vikesh; Singh, Indrasen; Hosmani, Santosh Sattappa |
| 2023 | Fabrication of Large Alumina Grit-Based Monolayer Grinding Wheel through Electroplating Followed by Detonation Gun Spray Technique for Increased Material Removal | Kaushik, Prabhat; Hussain, Shahid; Das, Apurba Kumar; Sabiruddin, Kazi |
| 2023 | Effect of reaction time on the phase quantity of hydroxyapatite synthesized from Indian clam seashell by hydrothermal technique | Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | On the validity of parallel plate assumption for modelling leakage flow past hydraulic piston-cylinder configurations | Gupta, Rishabh; Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2023 | Active damping of multiscale composite shells using Sinus theory incorporated with Murakami's zig-zag function | Gupta, Madhur; Kundalwal, Shailesh |
| 2023 | Post-processing of Wire Arc Additive Manufactured Stainless Steel 308L to Enhance Compression and Corrosion Behavior using Laser Shock Peening Process | Geethapriyan, Thangamani; Palani, Anand Iyamperumal; Singh, Mayank K.; Rai, Dhirendra Kumar |
| 2024 | Grain boundary sliding with diffusional accommodation enable dynamic recrystallization during hot deformation of coarse-grained body-centered cubic HfNbTaTiZr high-entropy alloys | Sathiaraj, Dan |
| 2023 | Effective thermo-electro-mechanical properties of Menger sponge-like fractal structures: a finite element study | Gaur, Aditya; Patel, Satyanarayan |
| 2023 | Comparison and testing of cerium oxide nanoparticle added Pongamia and, Scenedesmus microalgae biodiesel blends | Deshmukh, Suchit; Kumar, Ravinder; Bala, Kiran |
| 2023 | Friction stir powder additive manufacturing of Al 6061 alloy: Enhancing microstructure and mechanical properties by reducing thermal gradient | Chaudhary, Bhavesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2023 | Friction Stir Powder Additive Manufacturing of Multi-track Depositions of Al 6061 Alloy for Cladding and 3D Printing Applications | Chaudhary, Bhavesh; Patel, Mahesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash; Rana, Vivek |
| 2023 | Effect of Al content in the pyrotechnic mixture on the properties of the BaAl2O4-based composite coating deposited on steel by a novel explosive spray technique | Brahmane, Sonali; Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | Electromechanical response of boron nitride nanosheet reinforced nanocomposite beam: A finite element study | Bansod, Pritesh Vishwasrao; Gupta, Madhur; Kundalwal, Shailesh |
| 2023 | Models for barrier understanding in health and disease in lab-on-a-chips | Shanmugam, Dhinakaran |
| 2023 | Integrated experimental and modeling approach for hot deformation behavior of Co–Cr–Fe–Ni–V high entropy alloy | Samal, Sumanta |
| 2023 | Tensile behavior of single crystal nickel-based superalloys at 650°C | Vamsi, K. V. |
| 2023 | A simplistic accelerated design methodology for eutectic multi-principal element alloys | Talluri, Gopi; Maurya, Ram Sajeevan |
| 2023 | Radial Slicing Methods for Rotary Substrate Wire Arc Additive Manufacturing | Saxena, S.; Mishra, H.; Khan, Anas Ullah; Madhukar, Yuvraj Kumar |
| 2023 | Laser Induced Forward Transfer-Based Micro-3D Printing of NiTi Alloy | Sahu, Anshu; Karna, Pravin; Singh, Vipul; Palani, Anand Iyamperumal |
| 2023 | Micromechanical analysis of effective mechanical properties of graphene/ZrO2-hybrid poly (methyl methacrylate) nanocomposites | Rathi, Ankit; Kundalwal, Shailesh |
| 2023 | Effect of friction stir processing on plain fatigue and fretting fatigue behaviour of the AA6063 alloys | Patel, Mahesh; Sangrala, Sangam; Murugesan, J. |
| 2023 | Investigation of finned heat sinks with PEG-6000/EG and PEG-6000/MWCNT composite phase change material for thermal management application | Dutta, Pradunmya Pran; Saxena, Vivek; Sahu, Santosh Kumar |
| 2023 | Friction stir powder additive manufacturing of Al 6061/FeCoNi and Al 6061/Ni metal matrix composites: Reinforcement distribution, microstructure, residual stresses, and mechanical properties | Chaudhary, Bhavesh; Patel, Mahesh; Jain, Neelesh Kumar; Murugesan, J. |
| 2023 | Nano to macro-mechanical properties of laser directed energy deposited CoCrNi medium entropy alloy | Deshmukh, Poonam S.; Sathiaraj, G. Dan |
| 2023 | Simultaneous imaging of CH∗, C∗2, and temperature in flames using a DSLR camera and structured illumination | Chorey, Devashish; Jagadale, Vishal Satish; Deshmukh, Devendra; Mishra, Yogeshwar Nath |
| 2023 | Development of Cu-based shape memory alloy through selective laser melting from elemental powder mixture: Processing and characterization | Singh, Shalini; Palani, Anand Iyamperumal |
| 2023 | The flow and heat transfer behavior of synthetic jets with star shaped orifice of different lobes | Sharma, Pawan; Sahu, Santosh Kumar; Yadav, Harekrishna |
| 2023 | Experimental Investigation on Phase Change Material Enhanced Pin Finned Heat Sinks for Thermal Management Applications | Saxena, Vivek; Luthra, Aastha; Dutta, Pradunmya Pran; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2023 | Bio-inspired soft jellyfish robot: a novel polyimide-based structure actuated by shape memory alloy | Muralidharan, M.; Palani, Anand Iyamperumal |
| 2023 | Lepidium Didymium Plant Extract as Eco-Friendly Corrosion Inhibitor for Steel in Acidic Medium | Sathiaraj, Dan |
| 2023 | Thermal Performance Analysis of Phase Change Material-Based Plate Finned Heat Sinks for Thermal Management Applications | Dutta, Pradunmya Pran; Saxena, Vivek; Sahu, Santosh Kumar |
| 2023 | The implication of oversampling on the effectiveness of force signals in the fault detection of endodontic instruments during RCT | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2023 | Laser Surface Modification of Single-Crystal Nickel-Based Superalloy: Geometry, Microstructure, Crack Morphology, and Microhardness | Joshi, Suhas S. |
| 2023 | Laser Surface Remelting in Single-Crystal Nickel-based Superalloy using a Continuous Wave Fiber Laser | Joshi, Suhas S. |
| 2023 | State of the art of rational design of efficient mufflers | Kumar, Krishna M. |
| 2023 | Parametric Investigation on laser annealing of polyimide on improving the characteristics of NiTi SMA-based bimorph towards the development of microactuators | Gangwar, Kaushal; Gupta, Dhruv; Apalani, Palani Iyamperumal |
| 2023 | Investigation of laser-textured triboelectric nanogenerator for vibration sensing of machine tools | Kaushik, K.; Gupta, Puneet; Diksha, J.; Tripathi, Ashwani S.; Joshi, Suhas S.; Palani, Anand Iyamperumal |
| 2023 | Influence of the interlayer temperature on structure and properties of CMT wire arc additive manufactured NiTi structures | Singh, Shalini; Palani, Anand Iyamperumal |
| 2023 | Effect of bulk porosity on the pyroelectric properties of Na0.5Bi0.5TiO3–0.06BaTiO3 ceramics | Saurabh, Nishchay; Patel, Satyanarayan |
| 2023 | Recent trends on electro chemical machining process of metallic materials: a review | Thangamani, Geethapriyan |
| 2023 | A New Hybrid LSTM-GRU Model for Fault Diagnosis of Polymer Gears Using Vibration Signals | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2023 | Frequency Response Characterization of Thin-Film Shape Memory Alloy Actuator for Reconfigurable Antenna | Jayachandran, Shanthi; Palani, Anand Iyamperumal |
| 2023 | Influence of Silver-Coated Tool Electrode on Electrochemical Micromachining of Incoloy 825 | Thangamani, Geethapriyan; Anand, Palani Iyamperumal |
| 2023 | Electrocaloric devices using cantilever structures | Patel, Satyanarayan |
| 2023 | Atomistic insights into the fracture mechanisms of Stone–Wales-defected CNTs under transversely isotropic loading | Mishra, Saurabh; Kundalwal, Shailesh |
| 2023 | Effect of single and multiple protrusions on thermal performance of slot jet impingement with curved surface | Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2023 | Quantification of phases present in hydrothermally synthesized hydroxyapatite powders from Indian clam seashell by Rietveld refinement method | Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | Process Development and Analysis of Electromagnetic Multi-Spot Joining of AA5052 Sheets | Singh, Ummed; Rajak, Ashish |
| 2023 | Microstructure evolution and mechanical properties of multi-layer deposition of Ti-6Al-4V-5Ni alloy developed by μ-plasma-based metal additive manufacturing process | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Sathiaraj, Dan |
| 2023 | Time-Varying Oscillatory Response of Burning Gel Fuel Droplets | Sharma, Janmejai; Miglani, Ankur |
| 2023 | Polarization in the van der Waals–bonded graphene/hBN heterostructures with triangular pores | Nevhal, Subhash K.; Gupta, Madhur; Kundalwal, Shailesh |
| 2023 | Heat transfer characteristics of the flat plate integrated with metal foam of varying thickness using an unconfined circular air-jet impingement | Kumar Singh, Pradeep; Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2023 | Effects of Different Grit Blasting Environments on the Prepared Steel Surface | Tawade, Prathamesh; Shembale, Suyog; Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | Darcy number influence on natural convection around porous cylinders in an enclosure using Darcy- Brinkman-Forchheimer model: LBM study | Shruti, B.; Parkash, A.; Shanmugam, Dhinakaran |
| 2023 | A lab-on-chip solution for the detection and suppression of COVID-19 severity | Laxmi, Vijai |
| 2023 | Green emission and photoelectrical properties of low concentration Mn doped CsPbBr3 nanocrystals | Bhardwaj, Aditya; Kushwaha, Ajay Kumar |
| 2023 | Wire arc additive manufacturing of commercially pure titanium bio-medical alloy | Deshmukh, Poonam S.; Sahu, Anshu; Sathiaraj, Dan; Palani, Anand Iyamperumal; Sonawane, Avinash |
| 2023 | Effect of poling direction on microhardness and indentation fracture toughness in PMN-0.28PT and PMN-0.32PT single crystals | Dadhich, Ramanand; Singh, Indrasen |
| 2023 | An Automated Image Processing Module for Quality Evaluation of Milled Rice | Miglani, Ankur |
| 2023 | Progressive damage analysis in an open hole compression of FRP laminates including fiber kinking and pre-existing damage | Joshi, Suhas S. |
| 2023 | Static analysis and vibration characteristics of some noncarbon nanotubes through atomistic continuum coupled modelling | Singh, Sandeep; Joshi, Ravindra |
| 2023 | Functional properties of NiTi / Kapton nanocomposites deposited by electronic beam evaporation | Palani, Anand Iyamperumal; Jayachandran, Shanthi; Sahu, Anshu |
| 2023 | Performance evaluation of LSTM and Bi-LSTM using non-convolutional features for blockage detection in centrifugal pump | Ranawat, Nagendra Singh; Prakash, Jatin; Miglani, Ankur; Kankar, Pavan Kumar |
| 2023 | Development of Co-Cr-Mo-xTi alloys by micro-plasma-based 3D printing for knee implant applications and its biocompatibility assessment | Kumar, Pankaj; Jain, Neelesh Kumar; Gupta, Sharad |
| 2023 | Effect of heating temperature and time of hydrothermal reaction on the synthesis of hydroxyapatite from hen's eggshell | Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | Solid-state welding of nitinol shape memory alloys: A review | Palani, Anand Iyamperumal |
| 2023 | Atomistic insights into the H2 adsorption and desorption behavior of novel Li-functionalized polycrystalline CNTs | Mishra, Saurabh; Luhadiya, Nitin; Kundalwal, Shailesh |
| 2023 | Low-Temperature Combustion Aftertreatment Strategy and Particle Emission Correlation with Different Dual-Fuel Ratios | Barman, Jyotirmoy; Deshmukh, Devendra Laxmanrao |
| 2022 | INFLUENCE OF BRAZIER EFFECT ON THE FAILURE BEHAVIOR OF A GFRP THIN CIRCULAR CYLINDER - AN EXPERIMENTAL AND NUMERICAL STUDY | Sharma, Akash |
| 2022 | ENHANCING THE PERFORMANCE MEASURES OF ABRASIVE WATER JET MACHINING ON DRILLING ACRYLIC GLASS MATERIAL | Thangamani, Geethapriyan |
| 2023 | Surface finishing of an additively manufactured part using electrochemical jet machining | Chaudhary, Bhavesh; Jain, Neelesh Kumar |
| 2023 | Microstructure, mechanical properties, and strain rate sensitivity of vacuum arc melted CoCrNi medium entropy alloy | Deshmukh, Poonam S.; Sathiaraj, G. Dan |
| 2023 | Influence of manganese addition in ZnO-based piezoelectric nanogenerator for mechanical energy harvesting | Manikandan, M. |
| 2023 | Investigations on tip relieving of spur gears by non-contact process | Rana, Vivek; Jain, Neelesh Kumar |
| 2023 | Deposition of HA-based coatings on bio-inert substrates by various deposition methods for improved bio-mechanical properties | Hussain, Shahid; Sabiruddin, Kazi |
| 2023 | Characterization of the Liquid-Lubricant Interface in a Dovetail Cavity for a Viscous Laminar Flow | Joshi, Suhas S. |
| 2023 | Postbuckled vibration behaviour of skew sandwich plates with metal foam core under arbitrary edge compressive loads using isogeometric approach | Singh, Sandeep |
| 2023 | Investigation on the Performance of Coated Carbide Tool during Dry Turning of AISI 4340 Alloy Steel | Jain, Neelesh Kumar; Petare, Anand C. |
| 2023 | Blockage Detection in Centrifugal Pump Using Butterfly Optimization-Based Feature Selection | Ranawat, Nagendra Singh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2023 | Supervised Machine Learning Based Approach for Early Fault Detection in Polymer Gears Using Vibration Signals | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2023 | Solar energy harvesting using lead-free pyroelectric bulk ceramics: A simulation study | Saurabh, Nishchay; Patel, Satyanarayan |
| 2022 | ENERGY AND EXERGY ANALYSIS OF PEBBLE BED THERMAL ENERGY STORAGE SYSTEM FOR DIESEL ENGINE EXHAUST | Yadav, Harekrishna; Patel, Satyanarayan |
| 2022 | Effect of auxetic structures parameters variation on PVDF-based piezoelectric energy harvesters | Saurabh, Nishchay; Patel, Satyanarayan |
| 2022 | Preface | Kankar, Pavan Kumar |
| 2022 | Jetting Dynamics of Burning Gel Fuel Droplets | Sharma, Janmejai; Miglani, Ankur; Kankar, Pavan Kumar |
| 2023 | Bio-tribological Characteristics of 3D-Printed Ti–Ta–Nb–Mo–Zr High Entropy Alloy in Human Body Emulating Biofluids for Implant Applications | Kumar, Pankaj; Patel, Mahesh; Jain, Neelesh Kumar; Gupta, Sharad |
| 2023 | Role of additive manufacturing in biomedical application | Goyal, Vipin; Kumar, Ajit; Verma, Girish |
| 2022 | Prediction of Apical Extent Using Ensemble Machine Learning Technique in the Root Canal through Biomechanical Preparation: In-vitro Study | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2022 | EFFECT OF FIN SHAPE ON CONSTRAINED MELTING HEAT TRANSFER OF PHASE CHANGE MATERIAL IN A SPHERICAL CAPSULE: A NUMERICAL STUDY | Sharma, Avadhesh Kumar; Saxena, Vivek; Sahu, Santosh Kumar |
| 2022 | Thermal Analysis of a Li-Ion Battery Coupled with Phase Change Material (Paraffin Wax RT-35) filled with Copper Metal Foam: A Numerical Study | Saxena, Vivek; Kumar, Anuj; Sharma, Avadhesh Kumar; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2022 | Dynamic Response of Some Noncarbon Nanomaterials Using Multiscale Modeling Involving Material and Geometric Nonlinearities | Singh, Sandeep; Singh, Priyansh |
| 2023 | Designing of a Field Shaper for Electromagnetic Crimping of Multi-Tube-Tube and Multi-Tube-Rod in Single Discharge Energy | Rajak, Ashish |
| 2023 | Investigation of unified impact of Ti adatom and N doping on hydrogen gas adsorption capabilities of defected graphene sheets | Luhadiya, Nitin; Kundalwal, Shailesh; Sahu, Santosh Kumar |
| 2022 | Microstructure characterization of Co-Cr-Mo-xTi alloys developed by micro-plasma based additive manufacturing for knee implants | Kumar, Pankaj; Jain, Neelesh Kumar; Gupta, Sharad |
| 2023 | Structural characterization and regression rate of solidified ethanol fuels for hybrid rocket applications | Sharma, Janmejai; Miglani, Ankur |
| 2023 | Study of microstructure evolution and mechanical properties in friction stir based additive multi-layer manufacturing of Al 6061 alloy: Effect of feedstock material form and heat treatment | Chaudhary, Bhavesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash; Sathiaraj, Dan |
| 2022 | Wear Analysis and Tool Life Modeling in Micro Drilling of Inconel 718 Superalloy | Joshi, Suhas S. |
| 2022 | Multiple dynamics in a delayed predator-prey model with asymmetric functional and numerical responses | Ghosh, Bapan |
| 2022 | Nanomechanical, Tribological, and Scratch Properties of Electroless Ni-B-W Alloy and Ni-B-W-SiC Composite Coatings | Nemane, Vaibhav; Chatterjee, Satyajit |
| 2022 | Effect of tool rotational speed on microstructure and mechanical properties of AA6061/SiC surface composites using friction stir processing | Suman, Setu |
| 2022 | Deep Convolutional Neural Network based Classification of Microscopic Images of Environmental Microorganism | Dhavale, Amit Vikrant |
| 2022 | Improving functional performance characteristics of spur gears through flank modifications by non-contact advanced finishing process | Rana, Vivek; Jain, Neelesh Kumar |
| 2022 | Measurement and Metrology in Advanced Manufacturing Processes | Kankar, Pavan Kumar |
| 2023 | Performance Prediction of an Axial Piston Pump With Increasing Severity of Leakage Fault in Single and Multiple Cylinder Performance Prediction of an Axial Piston Pump With Increasing Severity of Leakage Fault in Single and Multiple Cylinders | Gupta, Rishabh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2022 | Behavior of Particulate Matter Emissions in a Dual-Fuel Engine | Barman, Jyotirmoy; Deshmukh, Devendra |
| 2022 | Parametric investigation on laser interaction with polyimide for graphene synthesis towards flexible devices | Singh, Arpit; Shiby, Sooraj; Sahu, Anshu; Pachori, Piyush; Tanwar, Manushree; Kumar, Rajesh; Palani, Anand Iyamperumal |
| 2022 | Effect of Fuel Reactivity on Engine Performance and Exhaust Gas Emissions in a Diesel Engine | Barman, Jyotirmoy; Deshmukh, Devendra |
| 2022 | Dynamic Response Computation of a Wind Turbine Gearbox Under Variable Speed Conditions and its Experimental Validation | Dewangan, Palash; Parey, Anand |
| 2022 | A Novel Change Point Detection Approach for Analysis of Time-Ordered Satellite Imagery | Majumdar, Joydeep |
| 2022 | Effect of Ni-5Al Addition on the Properties of BaAl2O4-Based Coating Deposited with a Novel Explosive Spray Coating Technique | Hussain, Shahid; Sharma, Mayank; Sharma, Vishal; Brahmane, Sonali; Sabiruddin, Kazi |
| 2023 | Characterization and tribological behaviour of Indian clam seashell-derived hydroxyapatite coating applied on titanium alloy by plasma spray technique | Hussain, Shahid; Shah, Zuber Ali; Sabiruddin, Kazi |
| 2022 | Prediction of sound transmission loss of hemispherical shell using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
| 2022 | Cold spray-based rapid and scalable production of printed flexible electronics | Subramaniam, Karthick |
| 2022 | Performance Characteristics of Spur Gears Hobbed under MQL, Flood Lubrication, and Dry Environments | Rana, Vivek; Jain, Neelesh Kumar |
| 2023 | Investigation on Actuation Performance of Shape Memory Alloy Actuator for Robotics Application | Jayachandran, Shanthi; Yashwanth, NeelamHussain, Hampa FaazilPalani, Anand Iyamperumal |
| 2022 | LBM study of natural convection heat transfer from a porous cylinder in an enclosure | Shruti, B.Parkash, A.Shanmugam, Dhinakaran |
| 2022 | Performance of centrifugal pump over a range of composite wear ring clearance | Ranawat, Nagendra Singh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2022 | A review on tribological investigations for automotive applications | Goyal, Vipin; Kumar, Pankaj; Arya, Pradyumn Kumar; Sathiaraj, Dan; Verma, Girish |
| 2023 | The Effect of Thermal Interaction Between Boiling Parallel Microchannels on Flow Distribution | Miglani, Ankur;Sharma, JanmejaiKankar, Pavan Kumar; |
| 2022 | ATHENA detector proposal - a totally hermetic electron nucleus apparatus proposed for IP6 at the Electron-Ion Collider | Chetri, H.Joshi, S.Kushawaha, N.Mustafa, H.Rathi, S.;Roy, A.;Sharma, Deepali |
| 2022 | Interdependent effects of surface and flexoelectricity on the electromechanical behavior of BNRC nanoplate | Kundalwal, Shailesh;Gupta, Madhur; |
| 2022 | Microstructure and mechanical properties of dissimilar laser welding of NiTi to copper | Kumar, Vivek;Arya, Pradyumn Kumar;Palani, Anand Iyamperumal;Madhukar, Yuvraj Kumar;Sathiaraj, Dan; |
| 2022 | Study of mechanical characteristics of additively manufactured Co-Cr-Mo-2/4/6Ti alloys for knee implant material | Kumar, Pankaj;Jain, Neelesh Kumar;Gupta, Sharad |
| 2022 | COMBINED CORRELATION TO PREDICT TRAJECTORIES OF AIRBLAST SPRAY AND JET IN CROSS-FLOWS—INDEPENDENT OF TWO-PHASE MOMENTUM RATIO | Kulkarni, Aniket P.;Deshmukh, Devendra; |
| 2022 | Experimental investigation and parametric optimization of friction stir powder additive manufacturing process for aerospace-grade Al alloy | Chaudhary, Bhavesh;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Mechanical and tribological characterization of deep eutectic solvent assisted electroless Ni–P-hBN coating | Khaira, Avinandan;Mukhopadhyay, Suman;Chatterjee, Satyajit; |
| 2022 | Topological defects embedded large-sized single-walled carbon nanotubes for hydrogen storage: A molecular dynamics study | Mishra, SaurabhKundalwal, Shailesh; |
| 2022 | In-Situ Temperature Monitoring and Feedback Control in the Gas Tungsten Arc Welding Process | Khan, Anas Ullah;Patidar, ManishMadhukar, Yuvraj Kumar; |
| 2022 | Tribological performance of phosphonium-based halogen-free ionic liquids as lubricant additives | Rajak, Ashish |
| 2022 | Multiobjective Optimization of Heat-Treated Copper Tool Electrode on EMM Process Using Artificial Bee Colony (ABC) Algorithm | Thangamani, Geethapriyan |
| 2022 | Deep learning-based methods for detecting surface defects in steel plates | Patil, SaksheeMiglani, Ankur;Kankar, Pavan Kumar; |
| 2022 | Deep learning-based image processing for analyzing combustion behavior of gel fuel droplets | Agarwal, VandanChitkariya, PuneetMiglani, Ankur;Kankar, Pavan Kumar; |
| 2022 | Synthesis and evaluation of a new gel polymer electrolyte for high-performance Li-ion batteries from electrospun nanocomposite of PVDF/Ca–Al-layered double hydroxide | S., Janakiraman; |
| 2022 | Aptness of the swarf substrate for the additive manufacturing application | Khan, Anas Ullah;Madhukar, Yuvraj Kumar; |
| 2022 | Effect of orifice shape on impinging synthetic jet | Yadav, Harekrishna; |
| 2022 | Microstructure, mechanical and corrosion properties of differently cooled friction stir welded joints of Al and Mg alloys | Arya, Pradyumn Kumar;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Experimental investigation of flow and thermal characteristics of synthetic jet issuing from sharp-edged orifices | Sharma, PawanSahu, Santosh Kumar;Yadav, Harekrishna; |
| 2023 | Sheet Atomization of Gel Propellant Simulant | Deshmukh, Devendra; |
| 2022 | Numerical investigation of the flow and thermal behavior of impinging single and multi-orifice synthetic jets with different waveforms | Singh, Pushpanjay K.;Shah, Ayush K.Tripathi, Shubhendu N.Yadav, Harekrishna;Upadhyay, Prabhat Kumar;Sahu, Santosh Kumar; |
| 2022 | Preface | Palani, Anand Iyamperumal; |
| 2021 | Preface | Kankar, Pavan Kumar; |
| 2022 | Double-tuning and experimental validation of rotated-offset inlet-outlet circular chamber muffler | Kumar, Krishna Mohan |
| 2022 | Thermal analysis of drilling in titanium under flood and cryogenic cooling using coupled CFD and FEM | Joshi, Suhas S.; |
| 2022 | Numerical and Experimental Validation for Prediction of Failure in Electromagnetic Forming of AA6061 Sheet | Rajak, Ashish ; |
| 2023 | Preface | Kankar, Pavan Kumar; |
| 2022 | Optimum strength and ductility of pure copper fabricated by Wire Arc Additive Manufacturing | Deshmukh, Poonam S.;Tomar, K. P.;Sathiaraj, G. Dan;Palani, Anand Iyamperumal; |
| 2022 | Microstructure, mechanical and corrosion behaviour of friction stir welding of AA6061 Al alloy and AZ31B Mg alloy | Arya, Pradyumn Kumar;Sathiaraj, Dan;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Flank Surface Treatment of Spur Gears Machined by MQL Assisted Hobbing Using Micro-Plasma Transferred Arc | Kharka, Vishal; Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Covalent and van der Waals interactions in a vertical heterostructure composed of boron and carbon | Singh, Shivendra |
| 2022 | Recent Advances in Passive Acoustic Localization Methods via Aircraft and Wake Vortex Aeroacoustics | Joshi, A. T. |
| 2022 | Postbuckling and postbuckled vibration behaviour of imperfect trapezoidal sandwich plates with FG-CNTRC face sheets under nonuniform loadings | Singh, Sandeep |
| 2022 | Parametric investigations on laser-induced forward transfer based micro-3D printing of NiTi alloy | Sahu, Anshu; Palani, Anand Iyamperumal; Singh, Vipul |
| 2022 | Combining Holistic Source Code Representation with Siamese Neural Networks for Detecting Code Clones | Patel, Smit |
| 2022 | An overview of the machinability of alloy steel | Petare, Anand C. |
| 2022 | Effect of Laser Shock Peening of WAAM Deposited Ni–Ti Shape Memory Alloy on the Mechanical Property | Tomar, Krishnpal Singh; Sahu, Anshu; Shukla, Ashish K.; Palani, Anand Iyamperumal |
| 2022 | Preface | Palani, Anand Iyamperumal |
| 2022 | Effect of Welding Speed on Phase Transformation and Mechanical Properties of Laser-Welded NiTi Shape Memory Alloy | Kumar, Vivek; Palani, Anand Iyamperumal; Madhukar, Yuvraj Kumar |
| 2022 | Theoretical Investigations on Influence of Inter-pass Cooling Conditions on Wire Arc Additive Manufactured Parts | Kumar, Gorlea Thrinadh Ananthvenkata Tarun; Singh, Shalini; Shukla, Ashish K.; Palani, Anand Iyamperumal |
| 2022 | A theoretical model for effective thermal conductivity of open-cell-coated metal foams saturated with fluid/phase change material | Saxena, Vivek; Kothari, Rohit; Kumar, Anuj; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2022 | Effect of orientation of CNTs and piezoelectric fibers on the damping performance of multiscale composite plate | Gupta, Madhur; Kundalwal, Shailesh |
| 2022 | Effect of asymmetric fluid flow distribution on flow boiling in a microchannel heat sink – An experimental investigation | Kumar, Ritunesh; Singh, Gurjeet |
| 2022 | Effect of fin location on constrained melting heat transfer of phase change material in a spherical capsule: A numerical study | Sharma, Avadhesh Kumar; Kothari, Rohit; Sahu, Santosh Kumar |
| 2022 | Polymer Gear Fault Classification Using EMD-DWT Analysis Based on Combination of Entropy and Hjorth Features | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2022 | Electromechanical response of stacked h-BN layers: A computational study | Choyal, Vijay K.; Kundalwal, Shailesh |
| 2022 | Microindentation response of relaxor ferroelectric PMN-0.32PT single crystal | Dadhich, Ramanand; Korimilli, Eswara Prasad; Singh, Indrasen |
| 2022 | Influence of pre-strain on attributes of Ni-rich NiTi/ Kapton polyimide bimorph for flexible mirrors | Gangwar, Kaushal; Jayachandran, Shanthi; Sahu, Anshu; Singh, Arpit; Palani, Anand Iyamperumal |
| 2022 | Performance comparison of green lubricants in gear hobbing with minimum quantity lubrication | Kharka, Vishal; Jain, Neelesh Kumar |
| 2022 | XGBoost based residual life prediction in the presence of human error in maintenance | Mohril, Ram S.; Lad, Bhupesh Kumar |
| 2022 | Generalized semi-mechanistic model of impinging jet quenching heat transfer | Sahu, Santosh Kumar |
| 2022 | Experimental Study on Laser-Induced Surface Damage of a Single-Crystal Nickel-Based Superalloy Under Continuous Wave Fiber Laser Scanning Process | Joshi, Suhas S. |
| 2022 | Topology of flow and heat transfer from prisms in square array | Shanmugam, Dhinakaran |
| 2022 | Numerical analysis of WaveOne Gold and 2Shape endodontic files during root canal treatment | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2022 | An experimental investigation of the flow-field and thermal characteristics of synthetic jet impingement with different waveforms | Singh, Pushpanjay K.; Yadav, Harekrishna; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2022 | Effect of walnut shell particulate content and size on Physico-Mechanical properties of hybrid glass fiber composite | Arya, Pradyumn Kumar |
| 2022 | High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Enhanced Energy Conversion and Storage Properties of Sn-Doped BaTiO3 Bulk Ceramics Using Compressive Stresses | Saurabh, Nishchay; Patel, Satyanarayan |
| 2022 | Investigation on fabrication of NiTi based strain gauge using laser decal transfer based µ-3D printing | Sahu, Anshu; Palani, Anand Iyamperumal; Singh, Vipul |
| 2022 | Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing | Palani, Anand Iyamperumal; Singh, Shalini; Kumar, Ajit; Sahu, Anshu |
| 2020 | Simulation-based joint optimization of fleet system modularity and level of repair decisions considering different failure rates of components | Lad, Bhupesh Kumar |
| 2022 | Synergistic effect of ultrasonically assisted exfoliated MWCNTs by ZrO2 nanoparticles on thermo-mechanical and anti-corrosive properties of epoxy nanocomposites | Rathi, Ankit; Kundalwal, Shailesh |
| 2022 | Using abrasive flow finishing process to reduce noise and vibrations of cylindrical and conical gears | Rana, Vivek; Petare, Anand C.; Jain, Neelesh Kumar; Parey, Anand |
| 2021 | Internal Leakage Detection in a Hydraulic Pump using Exhaustive Feature Selection and Ensemble Learning | Prakash, Jatin; Kankar, Pavan Kumar; Miglani, Ankur |
| 2021 | Monitoring the Degradation in the Switching Behavior of a Hydraulic Valve Using Recurrence Quantification Analysis and Fractal Dimensions | Prakash, Jatin; Kankar, Pavan Kumar; Miglani, Ankur |
| 2022 | An analytical solution for the static bending of smart laminated composite and functionally graded plates with and without porosity | Singh, Sandeep |
| 2022 | Polarization in graphene nanoribbons with inherent defects using first-principles calculations | Nevhal, Subhash K.; Kundalwal, Shailesh |
| 2020 | Acquisition and Analysis of Endodontic Handpiece Vibration Signals | Kankar, Pavan Kumar |
| 2021 | Comparison of clustering techniques for feature-based toolpath generation in dieless manufacturing | Kankar, Pavan Kumar |
| 2021 | The Effect of Uneven Heating on the Flow Distribution Between Parallel Microchannels Undergoing Boiling | Miglani, Ankur |
| 2022 | Development of theoretical models for dimensions of single-layer multi-track and multi-layer multi-track depositions by μ-PTA additive manufacturing process | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Surface roughness prediction in micro-plasma transferred arc metal additive manufacturing process using K-nearest neighbors algorithm | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Experimental investigation on paraffin wax-based heat sinks with cross plate fin arrangement for cooling of electronic components | Kumar, Anuj; Kothari, Rohit; Saxena, Vivek; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2022 | Experimental and numerical investigation on flexural performance of carbon fiber reinforced polymer composites with uniform and non-uniform waviness | Singh, Sandeep |
| 2022 | Experimental analysis of the heat transfer rate of phase change material inside a horizontal cylindrical latent heat energy storage system | Kothari, Rohit |
| 2022 | Sustainability and performance assessment of gear hobbing under different lubrication environments for manufacturing of 20MnCr5 spur gears | Kharka, Vishal; Jain, Neelesh Kumar |
| 2021 | Achieving sustainability in machining of cylindrical gears | Kharka, Vishal; Jain, Neelesh Kumar |
| 2022 | Development of High Performance Vertical Falling Film Plastic Dehumidifier Exploiting Surface Modification Technique | Khan, Rehan; Patil, Digvijay; Kumar, Ritunesh |
| 2022 | Experimental investigations on the performance characteristics of plastic surfaces for developing low flow falling film liquid desiccant regenerators | Khan, Rehan; Kumar, Ritunesh |
| 2022 | Modes of atomization in biofuel droplets induced by a focused laser pulse | Jagadale, Vishal S.; Deshmukh, Devendra |
| 2022 | Mixed mode (I and II) fracture behavior of nanoglass and metallic glass | Hirmukhe, S. S.; Joshi, Amit T.; Singh, Indrasen |
| 2022 | Prediction of sound transmission loss of cylindrical acoustic enclosure using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
| 2022 | Prediction of sound transmission loss of conical acoustic enclosure using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
