Collection's Items (Sorted by Submit Date in Descending order): 501 to 1000 of 1286
| Issue Date | Title | Author(s) |
| 2023 | Structural characterization and regression rate of solidified ethanol fuels for hybrid rocket applications | Sharma, Janmejai; Miglani, Ankur |
| 2023 | Study of microstructure evolution and mechanical properties in friction stir based additive multi-layer manufacturing of Al 6061 alloy: Effect of feedstock material form and heat treatment | Chaudhary, Bhavesh; Jain, Neelesh Kumar; Murugesan, Jayaprakash; Sathiaraj, Dan |
| 2022 | Wear Analysis and Tool Life Modeling in Micro Drilling of Inconel 718 Superalloy | Joshi, Suhas S. |
| 2022 | Multiple dynamics in a delayed predator-prey model with asymmetric functional and numerical responses | Ghosh, Bapan |
| 2022 | Nanomechanical, Tribological, and Scratch Properties of Electroless Ni-B-W Alloy and Ni-B-W-SiC Composite Coatings | Nemane, Vaibhav; Chatterjee, Satyajit |
| 2022 | Effect of tool rotational speed on microstructure and mechanical properties of AA6061/SiC surface composites using friction stir processing | Suman, Setu |
| 2022 | Deep Convolutional Neural Network based Classification of Microscopic Images of Environmental Microorganism | Dhavale, Amit Vikrant |
| 2022 | Improving functional performance characteristics of spur gears through flank modifications by non-contact advanced finishing process | Rana, Vivek; Jain, Neelesh Kumar |
| 2022 | Measurement and Metrology in Advanced Manufacturing Processes | Kankar, Pavan Kumar |
| 2023 | Performance Prediction of an Axial Piston Pump With Increasing Severity of Leakage Fault in Single and Multiple Cylinder Performance Prediction of an Axial Piston Pump With Increasing Severity of Leakage Fault in Single and Multiple Cylinders | Gupta, Rishabh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2022 | Behavior of Particulate Matter Emissions in a Dual-Fuel Engine | Barman, Jyotirmoy; Deshmukh, Devendra |
| 2022 | Parametric investigation on laser interaction with polyimide for graphene synthesis towards flexible devices | Singh, Arpit; Shiby, Sooraj; Sahu, Anshu; Pachori, Piyush; Tanwar, Manushree; Kumar, Rajesh; Palani, Anand Iyamperumal |
| 2022 | Effect of Fuel Reactivity on Engine Performance and Exhaust Gas Emissions in a Diesel Engine | Barman, Jyotirmoy; Deshmukh, Devendra |
| 2022 | Dynamic Response Computation of a Wind Turbine Gearbox Under Variable Speed Conditions and its Experimental Validation | Dewangan, Palash; Parey, Anand |
| 2022 | A Novel Change Point Detection Approach for Analysis of Time-Ordered Satellite Imagery | Majumdar, Joydeep |
| 2022 | Effect of Ni-5Al Addition on the Properties of BaAl2O4-Based Coating Deposited with a Novel Explosive Spray Coating Technique | Hussain, Shahid; Sharma, Mayank; Sharma, Vishal; Brahmane, Sonali; Sabiruddin, Kazi |
| 2023 | Characterization and tribological behaviour of Indian clam seashell-derived hydroxyapatite coating applied on titanium alloy by plasma spray technique | Hussain, Shahid; Shah, Zuber Ali; Sabiruddin, Kazi |
| 2022 | Prediction of sound transmission loss of hemispherical shell using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
| 2022 | Cold spray-based rapid and scalable production of printed flexible electronics | Subramaniam, Karthick |
| 2022 | Performance Characteristics of Spur Gears Hobbed under MQL, Flood Lubrication, and Dry Environments | Rana, Vivek; Jain, Neelesh Kumar |
| 2023 | Investigation on Actuation Performance of Shape Memory Alloy Actuator for Robotics Application | Jayachandran, Shanthi; Yashwanth, NeelamHussain, Hampa FaazilPalani, Anand Iyamperumal |
| 2022 | LBM study of natural convection heat transfer from a porous cylinder in an enclosure | Shruti, B.Parkash, A.Shanmugam, Dhinakaran |
| 2022 | Performance of centrifugal pump over a range of composite wear ring clearance | Ranawat, Nagendra Singh; Miglani, Ankur; Kankar, Pavan Kumar |
| 2022 | A review on tribological investigations for automotive applications | Goyal, Vipin; Kumar, Pankaj; Arya, Pradyumn Kumar; Sathiaraj, Dan; Verma, Girish |
| 2023 | The Effect of Thermal Interaction Between Boiling Parallel Microchannels on Flow Distribution | Miglani, Ankur;Sharma, JanmejaiKankar, Pavan Kumar; |
| 2022 | ATHENA detector proposal - a totally hermetic electron nucleus apparatus proposed for IP6 at the Electron-Ion Collider | Chetri, H.Joshi, S.Kushawaha, N.Mustafa, H.Rathi, S.;Roy, A.;Sharma, Deepali |
| 2022 | Interdependent effects of surface and flexoelectricity on the electromechanical behavior of BNRC nanoplate | Kundalwal, Shailesh;Gupta, Madhur; |
| 2022 | Microstructure and mechanical properties of dissimilar laser welding of NiTi to copper | Kumar, Vivek;Arya, Pradyumn Kumar;Palani, Anand Iyamperumal;Madhukar, Yuvraj Kumar;Sathiaraj, Dan; |
| 2022 | Study of mechanical characteristics of additively manufactured Co-Cr-Mo-2/4/6Ti alloys for knee implant material | Kumar, Pankaj;Jain, Neelesh Kumar;Gupta, Sharad |
| 2022 | COMBINED CORRELATION TO PREDICT TRAJECTORIES OF AIRBLAST SPRAY AND JET IN CROSS-FLOWS—INDEPENDENT OF TWO-PHASE MOMENTUM RATIO | Kulkarni, Aniket P.;Deshmukh, Devendra; |
| 2022 | Experimental investigation and parametric optimization of friction stir powder additive manufacturing process for aerospace-grade Al alloy | Chaudhary, Bhavesh;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Mechanical and tribological characterization of deep eutectic solvent assisted electroless Ni–P-hBN coating | Khaira, Avinandan;Mukhopadhyay, Suman;Chatterjee, Satyajit; |
| 2022 | Topological defects embedded large-sized single-walled carbon nanotubes for hydrogen storage: A molecular dynamics study | Mishra, SaurabhKundalwal, Shailesh; |
| 2022 | In-Situ Temperature Monitoring and Feedback Control in the Gas Tungsten Arc Welding Process | Khan, Anas Ullah;Patidar, ManishMadhukar, Yuvraj Kumar; |
| 2022 | Tribological performance of phosphonium-based halogen-free ionic liquids as lubricant additives | Rajak, Ashish |
| 2022 | Multiobjective Optimization of Heat-Treated Copper Tool Electrode on EMM Process Using Artificial Bee Colony (ABC) Algorithm | Thangamani, Geethapriyan |
| 2022 | Deep learning-based methods for detecting surface defects in steel plates | Patil, SaksheeMiglani, Ankur;Kankar, Pavan Kumar; |
| 2022 | Deep learning-based image processing for analyzing combustion behavior of gel fuel droplets | Agarwal, VandanChitkariya, PuneetMiglani, Ankur;Kankar, Pavan Kumar; |
| 2022 | Synthesis and evaluation of a new gel polymer electrolyte for high-performance Li-ion batteries from electrospun nanocomposite of PVDF/Ca–Al-layered double hydroxide | S., Janakiraman; |
| 2022 | Aptness of the swarf substrate for the additive manufacturing application | Khan, Anas Ullah;Madhukar, Yuvraj Kumar; |
| 2022 | Effect of orifice shape on impinging synthetic jet | Yadav, Harekrishna; |
| 2022 | Microstructure, mechanical and corrosion properties of differently cooled friction stir welded joints of Al and Mg alloys | Arya, Pradyumn Kumar;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Experimental investigation of flow and thermal characteristics of synthetic jet issuing from sharp-edged orifices | Sharma, PawanSahu, Santosh Kumar;Yadav, Harekrishna; |
| 2023 | Sheet Atomization of Gel Propellant Simulant | Deshmukh, Devendra; |
| 2022 | Numerical investigation of the flow and thermal behavior of impinging single and multi-orifice synthetic jets with different waveforms | Singh, Pushpanjay K.;Shah, Ayush K.Tripathi, Shubhendu N.Yadav, Harekrishna;Upadhyay, Prabhat Kumar;Sahu, Santosh Kumar; |
| 2022 | Preface | Palani, Anand Iyamperumal; |
| 2021 | Preface | Kankar, Pavan Kumar; |
| 2022 | Double-tuning and experimental validation of rotated-offset inlet-outlet circular chamber muffler | Kumar, Krishna Mohan |
| 2022 | Thermal analysis of drilling in titanium under flood and cryogenic cooling using coupled CFD and FEM | Joshi, Suhas S.; |
| 2022 | Numerical and Experimental Validation for Prediction of Failure in Electromagnetic Forming of AA6061 Sheet | Rajak, Ashish ; |
| 2023 | Preface | Kankar, Pavan Kumar; |
| 2022 | Optimum strength and ductility of pure copper fabricated by Wire Arc Additive Manufacturing | Deshmukh, Poonam S.;Tomar, K. P.;Sathiaraj, G. Dan;Palani, Anand Iyamperumal; |
| 2022 | Microstructure, mechanical and corrosion behaviour of friction stir welding of AA6061 Al alloy and AZ31B Mg alloy | Arya, Pradyumn Kumar;Sathiaraj, Dan;Jain, Neelesh Kumar;Murugesan, Jayaprakash; |
| 2022 | Flank Surface Treatment of Spur Gears Machined by MQL Assisted Hobbing Using Micro-Plasma Transferred Arc | Kharka, Vishal; Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Covalent and van der Waals interactions in a vertical heterostructure composed of boron and carbon | Singh, Shivendra |
| 2022 | Recent Advances in Passive Acoustic Localization Methods via Aircraft and Wake Vortex Aeroacoustics | Joshi, A. T. |
| 2022 | Postbuckling and postbuckled vibration behaviour of imperfect trapezoidal sandwich plates with FG-CNTRC face sheets under nonuniform loadings | Singh, Sandeep |
| 2022 | Parametric investigations on laser-induced forward transfer based micro-3D printing of NiTi alloy | Sahu, Anshu; Palani, Anand Iyamperumal; Singh, Vipul |
| 2022 | Combining Holistic Source Code Representation with Siamese Neural Networks for Detecting Code Clones | Patel, Smit |
| 2022 | An overview of the machinability of alloy steel | Petare, Anand C. |
| 2022 | Effect of Laser Shock Peening of WAAM Deposited Ni–Ti Shape Memory Alloy on the Mechanical Property | Tomar, Krishnpal Singh; Sahu, Anshu; Shukla, Ashish K.; Palani, Anand Iyamperumal |
| 2022 | Preface | Palani, Anand Iyamperumal |
| 2022 | Effect of Welding Speed on Phase Transformation and Mechanical Properties of Laser-Welded NiTi Shape Memory Alloy | Kumar, Vivek; Palani, Anand Iyamperumal; Madhukar, Yuvraj Kumar |
| 2022 | Theoretical Investigations on Influence of Inter-pass Cooling Conditions on Wire Arc Additive Manufactured Parts | Kumar, Gorlea Thrinadh Ananthvenkata Tarun; Singh, Shalini; Shukla, Ashish K.; Palani, Anand Iyamperumal |
| 2022 | A theoretical model for effective thermal conductivity of open-cell-coated metal foams saturated with fluid/phase change material | Saxena, Vivek; Kothari, Rohit; Kumar, Anuj; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2022 | Effect of orientation of CNTs and piezoelectric fibers on the damping performance of multiscale composite plate | Gupta, Madhur; Kundalwal, Shailesh |
| 2022 | Effect of asymmetric fluid flow distribution on flow boiling in a microchannel heat sink – An experimental investigation | Kumar, Ritunesh; Singh, Gurjeet |
| 2022 | Effect of fin location on constrained melting heat transfer of phase change material in a spherical capsule: A numerical study | Sharma, Avadhesh Kumar; Kothari, Rohit; Sahu, Santosh Kumar |
| 2022 | Polymer Gear Fault Classification Using EMD-DWT Analysis Based on Combination of Entropy and Hjorth Features | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2022 | Electromechanical response of stacked h-BN layers: A computational study | Choyal, Vijay K.; Kundalwal, Shailesh |
| 2022 | Microindentation response of relaxor ferroelectric PMN-0.32PT single crystal | Dadhich, Ramanand; Korimilli, Eswara Prasad; Singh, Indrasen |
| 2022 | Influence of pre-strain on attributes of Ni-rich NiTi/ Kapton polyimide bimorph for flexible mirrors | Gangwar, Kaushal; Jayachandran, Shanthi; Sahu, Anshu; Singh, Arpit; Palani, Anand Iyamperumal |
| 2022 | Performance comparison of green lubricants in gear hobbing with minimum quantity lubrication | Kharka, Vishal; Jain, Neelesh Kumar |
| 2022 | XGBoost based residual life prediction in the presence of human error in maintenance | Mohril, Ram S.; Lad, Bhupesh Kumar |
| 2022 | Generalized semi-mechanistic model of impinging jet quenching heat transfer | Sahu, Santosh Kumar |
| 2022 | Experimental Study on Laser-Induced Surface Damage of a Single-Crystal Nickel-Based Superalloy Under Continuous Wave Fiber Laser Scanning Process | Joshi, Suhas S. |
| 2022 | Topology of flow and heat transfer from prisms in square array | Shanmugam, Dhinakaran |
| 2022 | Numerical analysis of WaveOne Gold and 2Shape endodontic files during root canal treatment | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2022 | An experimental investigation of the flow-field and thermal characteristics of synthetic jet impingement with different waveforms | Singh, Pushpanjay K.; Yadav, Harekrishna; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2022 | Effect of walnut shell particulate content and size on Physico-Mechanical properties of hybrid glass fiber composite | Arya, Pradyumn Kumar |
| 2022 | High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Enhanced Energy Conversion and Storage Properties of Sn-Doped BaTiO3 Bulk Ceramics Using Compressive Stresses | Saurabh, Nishchay; Patel, Satyanarayan |
| 2022 | Investigation on fabrication of NiTi based strain gauge using laser decal transfer based µ-3D printing | Sahu, Anshu; Palani, Anand Iyamperumal; Singh, Vipul |
| 2022 | Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing | Palani, Anand Iyamperumal; Singh, Shalini; Kumar, Ajit; Sahu, Anshu |
| 2020 | Simulation-based joint optimization of fleet system modularity and level of repair decisions considering different failure rates of components | Lad, Bhupesh Kumar |
| 2022 | Synergistic effect of ultrasonically assisted exfoliated MWCNTs by ZrO2 nanoparticles on thermo-mechanical and anti-corrosive properties of epoxy nanocomposites | Rathi, Ankit; Kundalwal, Shailesh |
| 2022 | Using abrasive flow finishing process to reduce noise and vibrations of cylindrical and conical gears | Rana, Vivek; Petare, Anand C.; Jain, Neelesh Kumar; Parey, Anand |
| 2021 | Internal Leakage Detection in a Hydraulic Pump using Exhaustive Feature Selection and Ensemble Learning | Prakash, Jatin; Kankar, Pavan Kumar; Miglani, Ankur |
| 2021 | Monitoring the Degradation in the Switching Behavior of a Hydraulic Valve Using Recurrence Quantification Analysis and Fractal Dimensions | Prakash, Jatin; Kankar, Pavan Kumar; Miglani, Ankur |
| 2022 | An analytical solution for the static bending of smart laminated composite and functionally graded plates with and without porosity | Singh, Sandeep |
| 2022 | Polarization in graphene nanoribbons with inherent defects using first-principles calculations | Nevhal, Subhash K.; Kundalwal, Shailesh |
| 2020 | Acquisition and Analysis of Endodontic Handpiece Vibration Signals | Kankar, Pavan Kumar |
| 2021 | Comparison of clustering techniques for feature-based toolpath generation in dieless manufacturing | Kankar, Pavan Kumar |
| 2021 | The Effect of Uneven Heating on the Flow Distribution Between Parallel Microchannels Undergoing Boiling | Miglani, Ankur |
| 2022 | Development of theoretical models for dimensions of single-layer multi-track and multi-layer multi-track depositions by μ-PTA additive manufacturing process | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Surface roughness prediction in micro-plasma transferred arc metal additive manufacturing process using K-nearest neighbors algorithm | Kumar, Pravin Siva; Jain, Neelesh Kumar |
| 2022 | Experimental investigation on paraffin wax-based heat sinks with cross plate fin arrangement for cooling of electronic components | Kumar, Anuj; Kothari, Rohit; Saxena, Vivek; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2022 | Experimental and numerical investigation on flexural performance of carbon fiber reinforced polymer composites with uniform and non-uniform waviness | Singh, Sandeep |
| 2022 | Experimental analysis of the heat transfer rate of phase change material inside a horizontal cylindrical latent heat energy storage system | Kothari, Rohit |
| 2022 | Sustainability and performance assessment of gear hobbing under different lubrication environments for manufacturing of 20MnCr5 spur gears | Kharka, Vishal; Jain, Neelesh Kumar |
| 2021 | Achieving sustainability in machining of cylindrical gears | Kharka, Vishal; Jain, Neelesh Kumar |
| 2022 | Development of High Performance Vertical Falling Film Plastic Dehumidifier Exploiting Surface Modification Technique | Khan, Rehan; Patil, Digvijay; Kumar, Ritunesh |
| 2022 | Experimental investigations on the performance characteristics of plastic surfaces for developing low flow falling film liquid desiccant regenerators | Khan, Rehan; Kumar, Ritunesh |
| 2022 | Modes of atomization in biofuel droplets induced by a focused laser pulse | Jagadale, Vishal S.; Deshmukh, Devendra |
| 2022 | Mixed mode (I and II) fracture behavior of nanoglass and metallic glass | Hirmukhe, S. S.; Joshi, Amit T.; Singh, Indrasen |
| 2022 | Prediction of sound transmission loss of cylindrical acoustic enclosure using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
| 2022 | Prediction of sound transmission loss of conical acoustic enclosure using statistical energy analysis and its experimental validation | Gupta, Pavan; Parey, Anand |
| 2022 | Synergistic effect of surface-flexoelectricity on electromechanical response of BN-based nanobeam | Gupta, Madhur; Kundalwal, Shailesh |
| 2022 | Diagnostics of Combined Mechanical and Electrical Faults of an Electromechanical System for Steady and Ramp-Up Speeds | Parey, Anand |
| 2022 | A Review on Twin Wire Arc Additive Manufacturing of Metals and Alloys: Microstructure and Mechanical Properties | Deshmukh, Poonam S.; Sathiaraj, Dan |
| 2022 | Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review | Sahu, Santosh Kumar |
| 2022 | Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining | Jain, Neelesh Kumar |
| 2022 | Deep CNN-based damage classification of milled rice grains using a high-magnification image dataset | Bhupendra; Moses, Kriz; Miglani, Ankur; Kumar Kankar, Pavan |
| 2022 | Microstructural and Mechanical Properties Analysis of Fibre Laser Welding of Dissimilar AA6061 and AA2024 Aluminium Alloy | Arya, Pradyumn Kumar; Kumar, Vivek; Sathiaraj, Dan; Palani, Anand Iyamperumal; Jain, Neelesh Kumar |
| 2022 | Optimization of Process Parameters for Friction Stir Welding of Aluminium Alloy AA5052-H32 by Using Taguchi Method | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2019 | Multi-response optimization of WEDM process parameters for machining of superelastic nitinol shape-memory alloy using a heat-transfer search algorithm | Mani Prabu, S. S.; Palani, Anand Iyamperumal |
| 2021 | On the effects of orientation on flow and heat transfer from a semi-circular cylinder near a stationary wall | Rajpoot, Rajendra S.; Anirudh, K.; Shanmugam, Dhinakaran |
| 2017 | Case study on the effectiveness of gear fault diagnosis technique for gear tooth defects under fluctuating speed | Parey, Anand |
| 2014 | Analysis of multi-region conduction-controlled rewetting of a hot surface with precursory cooling by variational integral method | Sahu, Santosh Kumar |
| 2018 | Development, Actuation and Material Analysis of Shape Memory Alloy Reinforced Composite Flapper | Sai, Yeswanth; Khan, Suhel; Mani Prabu, S. S.; Palani, Anand Iyamperumal; Umarikar, Amod C. |
| 2017 | Effective viscosity of nanofluids — A modified Krieger–Dougherty model based on particle size distribution (PSD) analysis | Shanmugam, Dhinakaran |
| 2021 | On comprehensive analysis of root canal shaping ability of three endodontic files of different kinematics | Kankar, Pavan Kumar |
| 2021 | Spray characteristics of biofuels for advance combustion engines | Chaudhari, Vasudev D.; Kulkarni, Aniket P.; Deshmukh, Devendra |
| 2021 | Simulation-based semi-empirical comparative study of fixed and vectored thruster configurations for an underwater vehicle | Kadiyam, Jagadeesh; Mohan, Santhakumar; Deshmukh, Devendra |
| 2021 | Modeling of Chipped Tooth Fault in Straight Bevel Gears | Dewangan, Palash; Ramteke, Dada Saheb; Parey, Anand |
| 2019 | Effect of flexoelectricity on the electromechanical response of graphene nanocomposite beam | Kundalwal, Shailesh |
| 2021 | Investigation on thermal characteristics of nano enhanced phase change material based finned and unfinned heat sinks for thermal management system | Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2018 | Improving spur gear microgeometry and surface finish by AFF process | Petare, Anand C.; Jain, Neelesh Kumar |
| 2013 | Observer - Assisted adaptive tracking control of an underactuated autonomous underwater vehicle | Mohan, Santhakumar; Kumar, Akshat; Santosh, Shanmukh |
| 2021 | Determining the Working Behaviour of Hydraulic System Using Support Vector Machine | Prakash, Jatin; Kankar, Pavan Kumar |
| 2013 | Precision finishing of bevel gears by electrochemical honing | Jain, Neelesh Kumar |
| 2017 | Investigations on the Influence of Liquid-Assisted Laser Ablation of NiTi Rotating Target to Improve the Formation Efficiency of Spherical Alloyed NiTi Nanoparticles | Patra, Nandini; Kumar, Akash; Rohit, Gagrani; Singh, Vipul; Palani, Anand Iyamperumal |
| 2020 | Experimental Study of Sideband Harmonics in Vibration Spectrum of Two-Stage Planetary Gear Box for Condition Monitoring | Parey, Anand |
| 2018 | Disturbance estimator based non-singular fast fuzzy terminal sliding mode control of an autonomous underwater vehicle | Mohan, Santhakumar |
| 2019 | Thermodynamic analysis of advanced resorption cooling/heating systems based on NH3–halide salts using measured PCIs [Analyse thermodynamique de systèmes avancés de refroidissement/chauffage à résorption à base d'halogénures ammoniaqués utilisant des isothermes de pression-concentration mesurées] | Sharma, R.; Emadabathuni, Anil Kumar |
| 2020 | Integrated Model and Machine Learning-Based Approach for Diagnosis of Bearing Defects | Kankar, Pavan Kumar |
| 2017 | Comprehensive Analysis of Convective Heat Transfer in Parallel Plate Microchannel with Viscous Dissipation and Constant Heat Flux Boundary Conditions | Sahu, Santosh Kumar |
| 2018 | Transversely isotropic thermal properties of carbon nanotubes containing vacancies | Kothari, Rohit; Kundalwal, Shailesh; Sahu, Santosh Kumar |
| 2022 | Effect of crump rubber on the solid particle erosion response of epoxy composites | Shahapurkar, Pavan |
| 2021 | An Approach to Acquire Vibration Signals for Gear Fault Detection | Parey, Anand |
| 2017 | Development of a planar 3prp parallel manipulator using shape memory alloy spring based actuators | Mohan, Santhakumar |
| 2021 | Thermomechanical analysis of 0.94Na1/2Bi1/2TiO3-0.06BaTiO3/ZnO composites using finite element method | Patel, Satyanarayan |
| 2017 | Gearbox fault diagnosis using RMS based probability density function and entropy measures for fluctuating speed conditions | Parey, Anand |
| 2020 | Experimental investigation of the thermal behavior a single-cavity and multiple-orifice synthetic jet impingement driven by electromagnetic actuator for electronics cooling | Singh, Pushpanjay K.; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2021 | 3D mapping of polycyclic aromatic hydrocarbons, hydroxyl radicals, and soot volume fraction in sooting flames using FRAME technique | Chorey, Devashish; Deshmukh, Devendra |
| 2021 | Developments in friction stir welding of aluminium to magnesium alloy | Arya, Pradyumn Kumar; Jain, Neelesh Kumar; Murugesan, Jayaprakash |
| 2020 | Diesel and diesel-gasoline fuelled premixed low temperature combustion (LTC) engine mode for clean combustion | Chaudhari, Vasudev D.; Deshmukh, Devendra |
| 2016 | Production and maintenance planning: an integrated approach under uncertainties | Purohit, Bhushan S.; Kumar Lad, Bhupesh |
| 2018 | Enhancing the life cycle behaviour of Cu-Al-Ni shape memory alloy bimorph by Mn addition | Kumar, Akash; Mani Prabu, S. S.; Jayachandran, Shanthi; Palani, Anand Iyamperumal |
| 2020 | A Numerical Investigation of Flow and Heat Transfer of Laminar Multiple Slot Jets Impinging on Multiple Protruding Heat Sources | Paulraj, Maheandera Prabu |
| 2018 | Adsorption isotherms, kinetics and thermodynamic simulation of CO2-CSAC pair for cooling application | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2016 | A review of the effect of the composition of biodiesel on NOx emission, oxidative stability and cold flow properties | Lanjekar, R. D.; Deshmukh, Devendra |
| 2017 | Advanced Gear Manufacturing and Finishing: Classical and Modern Processes | Jain, Neelesh Kumar |
| 2020 | Influence of grain size on the electrocaloric and pyroelectric properties in non-reducible BaTiO3ceramics | Patel, Satyanarayan |
| 2013 | Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness | Parey, Anand |
| 2018 | Experimental measurement of mesh stiffness by laser displacement sensor technique | Parey, Anand |
| 2021 | Experimental and numerical investigation of the thermal performance of impinging synthetic jets with different waveforms | Singh, Pushpanjay K.; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2020 | Micro-channel fabrication on NiTi shape memory alloy substrate using Nd3+: YAG laser | Jayachandran, Shanthi; Bhoyar, Jitesh V.; Kumar, Akash; Mani Prabu, S. S.; Bhirodkar, Sachin Laxman; Manikandan, M.; Shiva, S.; Palani, Anand Iyamperumal |
| 2014 | On surface integrity of miniature spur gears manufactured by wire electrical discharge machining | Jain, Neelesh Kumar |
| 2015 | On surface quality and wear resistance of straight bevel gears finished by pulsed electrochemical honing process | Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2013 | Bubble growth at nucleation cavity in microchannels | Kumar, Ritunesh |
| 2021 | Application of artificial intelligence techniques in incremental forming: a state-of-the-art review | Kankar, Pavan Kumar |
| 2015 | Analysis of stagnation region heat transfer of normally impinging axisymmetric jets on solid surfaces using integral method | Garg, Krati; Sahu, Santosh Kumar |
| 2016 | Influence of target grit count and sintering temperature on pulsed laser deposition of SiC thin films | Palani, Anand Iyamperumal |
| 2020 | Theoretical and Experimental Investigation of Spur Gearbox with Cracked Pinion Tooth Using Dynamic Model for Condition Monitoring | Parey, Anand |
| 2015 | Inverse dynamics and robust sliding mode control of a planar parallel (2-PRP and 1-PPR) robot augmented with a nonlinear disturbance observer | Mohan, Santhakumar |
| 2016 | Performance investigations on optimum mechanical design aspects of planar parallel manipulators | Mohan, Santhakumar |
| 2016 | Influence of Cu addition to improve shape memory properties in NiTi alloys developed by laser rapid manufacturing | Shiva, S.; Palani, Anand Iyamperumal |
| 2017 | Experimental investigation and thermodynamic analysis of CO2 adsorption on activated carbons for cooling system | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2016 | Preface | Jain, Neelesh Kumar |
| 2017 | Effect of Back-side Contact on Mesh Stiffness of Spur Gear Pair by Finite Element Method | Parey, Anand |
| 2021 | Vibration based fault detection of polymer gear | Kumar, Anupam; Parey, Anand; Kankar, Pavan Kumar |
| 2017 | Mixed convective heat transfer from a permeable square cylinder: A lattice Boltzmann analysis | Anirudh, K.; Shanmugam, Dhinakaran |
| 2019 | Exploring the functional capabilities of NiTi shape memory alloy thin films deposited using electron beam evaporation technique | Jayachandran, Shanthi; Mani Prabu, S. S.; Manikandan, M.; Muralidharan, M.; Kumar, Akash; Palani, Anand Iyamperumal |
| 2019 | Thermo mechanical analyses and characterizations of TiNiCu shape memory alloy structures developed by laser additive manufacturing | Shiva, S.; Palani, Anand Iyamperumal |
| 2021 | Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing | Singh, Shalini; Palani, Anand Iyamperumal; Tomar, K. P. |
| 2017 | An integrated strategy for fleet maintenance planning | Lad, Bhupesh Kumar |
| 2020 | Bearing fault diagnosis based on flexible analytical wavelet transform and fuzzy entropy approach | Kankar, Pavan Kumar |
| 2018 | Memetic algorithm to optimize level of repair and spare part decisions for fleet system | Lad, Bhupesh Kumar |
| 2018 | Effects of Prandtl number on the forced convection heat transfer from a porous square cylinder | Anirudh, K.; Shanmugam, Dhinakaran |
| 2018 | Investigation on thermo-mechanical behavior of SMA spring under the influence of different actuation medium | Nath, Tameshwer; Kumar, Akash; Chouhan, Priya; Lad, Bhupesh Kumar; Palani, Anand Iyamperumal |
| 2021 | Effect of rolling and annealing temperature on the mechanical properties of CrMnFeCoNi high-entropy alloy | Sathiaraj, G. Dan |
| 2019 | A comparative study for the selection of an entropy technique to classify bearing faults | Kankar, Pavan Kumar |
| 2021 | Development of subcarangiform bionic robotic fish propelled by shape memory alloy actuators | Muralidharan, M.; Palani, Anand Iyamperumal |
| 2021 | Investigation of phase change material integrated with high thermal conductive carbon foam inside heat sinks for thermal management of electronic components | Kumar, Anuj; Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh; Sharma, Avadhesh Kumar |
| 2014 | Studies on microscopic structure of diesel sprays under atmospheric and high gas pressures | Deshmukh, Devendra |
| 2020 | Development of Barrel Finishing Machine to Improve Surface Finish of the Wire Arc Additive Manufactured Parts | Khan, Anas Ullah; Patidar, M.; Petare, Anand C.; Chouhan, R.; Chouhan, Priya; Vishwakarma, B.; Sharma, U.; Kaushal, S.; Dhepte, D.; Madhukar, Yuvraj Kumar |
| 2019 | Study of laser texturing assisted abrasive flow finishing for enhancing surface quality and microgeometry of spur gears | Petare, Anand C.; Mishra, Ankit; Palani, Anand Iyamperumal; Jain, Neelesh Kumar |
| 2021 | Development and applications of thermoelectric based dehumidifiers | Patel, Satyanarayan |
| 2017 | Distributed maintenance planning in manufacturing industries | Bakshi, Miroojin; Lad, Bhupesh Kumar |
| 2016 | Measurement and analysis of adsorption isotherms of CO2 on activated carbon | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2015 | Failure diagnosis & reliability assessment of NiTi shape memory alloy spring for micro - Actuators | Singh, Himanshu; Juikar, Pratik; Tiwari, Tameshwer Nath; Lad, Bhupesh Kumar; Palani, Anand Iyamperumal |
| 2020 | An analytical approach to evaluate the maximum load carrying capacity for pin-mounted telescopic hydraulic cylinder | Prakash, Jatin; Gupta, Sumit Kumar; Kankar, Pavan Kumar |
| 2012 | An improved lumped analysis for transient heat conduction in different geometries with heat generation | Sahu, Santosh Kumar |
| 2015 | Comparative kinematic and dynamic performance analysis of planar parallel manipulators | Mohan, Santhakumar |
| 2016 | Investigation on actuation and thermo-mechanical behavior of shape memory alloy spring by comparing On/off and PID controller for precise position control | Nath, Tameshwer; S, Karthick; Chouhan, Priya; Lad, Bhupesh Kumar; Palani, Anand Iyamperumal |
| 2020 | Experimental and numerical investigation of thermal performance of synthetic jet impingement | Singh, Pushpanjay K.; Kothari, Rohit; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2018 | Measurement of FRFs of coupled geared rotor system and the development of an accurate finite element model | Saxena, Ankur; Parey, Anand |
| 2013 | Study on wire electric discharge machining based on response surface methodology and genetic algorithm | Jain, Neelesh Kumar |
| 2018 | Exploring WSEM process for manufacturing meso helical and bevel gears | Chaubey, Sujeet Kumar; Jain, Neelesh Kumar |
| 2019 | Pulsed laser deposition of SiC thin films and influence of laser-assisted annealing | Palani, Anand Iyamperumal |
| 2018 | Evaluation of stellite coatings by µ-PTA powder, laser, and PTA deposition processes | Jain, Neelesh Kumar |
| 2022 | Dynamic characteristics of a wind turbine gearbox with amplitude modulation and gravity effect: Theoretical and experimental investigation | Dewangan, Palash; Parey, Anand |
| 2020 | Experimental investigation on thermal characteristics of hot surface by synthetic jet impingement | Singh, Pushpanjay K.; Sahu, Santosh Kumar; Upadhyay, Prabhat Kumar |
| 2017 | Measurement and augmentation of effective thermal conductivity of La0.8Ce0.2Ni5hydride bed | Madaria, Y.; Emadabathuni, Anil Kumar |
| 2019 | Design and Robust Motion Control of a Planar 1P-2P RP Hybrid Manipulator for Lower Limb Rehabilitation Applications | Mohan, Santhakumar |
| 2017 | Surface Modification of Zeolite 4A Molecular Sieve by Planetary Ball milling | Panda, Debashis; Emadabathuni, Anil Kumar |
| 2019 | Effect of ambient pressure on macroscopic spray characteristic of various biodiesel fuels | Chaudhari, Vasudev D.; Deshmukh, Devendra |
| 2012 | Indirect adaptive control for autonomous underwater vehicle-manipulator systems | Mohan, Santhakumar |
| 2020 | Texture formation in face-centered cubic high-entropy alloys | Sathiaraj, G. Dan |
| 2019 | Fe2O3 magnetic particles derived triboelectric-electromagnetic hybrid generator for zero-power consuming seismic detection | Pandey, Rajagopalan |
| 2010 | An experimental investigation on the quenching of a hot vertical heater by water injection at high flow rate | Sahu, Santosh Kumar |
| 2019 | MHD Natural convection around a permeable triangular cylinder inside a square enclosure filled with Al 2 O 3 −H 2 O nanofluid: An LBM study | Shanmugam, Dhinakaran |
| 2013 | Steady flow of power-law fluids in a 1:3 planar sudden expansion | Shanmugam, Dhinakaran |
| 2019 | Phase inversion enabled energy scavenger: A multifunctional triboelectric nanogenerator as benzene monitoring system | Pandey, Rajagopalan |
| 2017 | Investigations on microgeometry of meso bevel and meso helical gears manufactured by WEDM process | Chaubey, Sujeet Kumar; Jain, Neelesh Kumar |
| 2020 | Effect of material form on deposition characteristics in micro-plasma transferred arc additive manufacturing process | Jain, Neelesh Kumar |
| 2012 | An experimental assessment of cooling of a 54-rod bundle by in-bundle injection | Sahu, Santosh Kumar |
| 2017 | Parametric investigations to enhance the thermomechanical properties of CuAlNi shape memory alloy Bi-morph | Kumar, Akash; Mani Prabu, S. S.; Palani, Anand Iyamperumal |
| 2014 | Robust disturbance observer based sliding mode control of a planar parallel (3-PPR) manipulator | Mohan, Santhakumar |
| 2021 | Antimony chalcogenide-based thin film solar cells: Device engineering routes to boost the performance | Yadav, Harekrishna |
| 2017 | Heat transfer characteristics of hot surface using high alcohol surfactant by impinging liquid jet | Sahu, Santosh Kumar |
| 2017 | Characteristics of Single-Track and Multi-track Depositions of Stellite by Micro-plasma Transferred Arc Powder Deposition Process | Jain, Neelesh Kumar |
| 2017 | Modeling and experimental validation of volumetric material removal rate and surface roughness depth of straight bevel gears in pulsed-ECH process | Jain, Neelesh Kumar |
| 2015 | Different domestic designs of solar stills: A review | Yadav, Saurabh |
| 2017 | A 2PRP-2PPR planar parallel manipulator for the purpose of lower limb rehabilitation | Mohan, Santhakumar |
| 2017 | New method of flow maldistribution mitigation in parallel microchannel heat sink | Yadav, Vikas; Kumar, Ritunesh |
| 2012 | Effect of laser post-treatment on Al 2O 3-TiB 2-TiN composite coating with free hBN | Chatterjee, Satyajit |
| 2017 | Study of heat transfer from a square cylinder utilizing nanofluids with multiphase modeling approach | Rajpoot, Rajendra S.; Shanmugam, Dhinakaran |
| 2020 | Flexoelectric and surface effects on the electromechanical behavior of graphene-based nanobeams | Kundalwal, Shailesh |
| 2019 | Numerical study on mitigation of flow maldistribution in parallel microchannel heat sink: Channels variable width versus variable height approach | Kumar, Ritunesh |
| 2020 | Numerical investigation of tensile response of notched bulk metallic glass composite specimens | Singh, Indrasen |
| 2016 | Experimental investigations on redefining the surface quality of bevel gears by pulsed electrochemical honing | Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2016 | A Review of Gear Fault Diagnosis Using Various Condition Indicators | Parey, Anand |
| 2022 | Adsorption and desorption behavior of titanium-decorated polycrystalline graphene toward hydrogen storage: a molecular dynamics study | Luhadiya, Nitin; Kundalwal, Shailesh; Sahu, Santosh Kumar |
| 2015 | Effect of finishing time and electrolyte composition on geometric accuracy and surface finish of straight bevel gears in ECH process | Jain, Neelesh Kumar |
| 2013 | Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique | Parey, Anand |
| 2016 | A multi-level homogenization model for thermal conductivity of nanofluids based on particle size distribution (PSD) analysis | Shanmugam, Dhinakaran |
| 2020 | Influence of MQL and hobbing parameters on microgeometry deviations and flank roughness of spur gears manufactured by MQL assisted hobbing | Kharka, Vishal; Jain, Neelesh Kumar |
| 2013 | Analysis of conduction-controlled rewetting of a hot surface by variational method | Sahu, Santosh Kumar |
| 2021 | The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing | Palani, Anand Iyamperumal; Singh, Shalini; Mani Prabu, S. S.; Jayachandran, Shanthi; Sahu, Anshu |
| 2019 | Heat transfer augmentation in double pipe water to air counter flow heat exchanger with helical surface disc turbulators | Yadav, Saurabh; Sahu, Santosh Kumar |
| 2020 | Impingement atomization of carbopol gels | Deshmukh, Devendra; Nath, Shubhankar |
| 2017 | Development of Cu-Al2O3-CBN Hybrid Composite through Powder Metallurgy Process and Analysis of Mechanical Properties | Bajpayee, Gaurav |
| 2017 | Thermodynamic analysis of single-stage and single-effect two-stage adsorption cooling cycles using indigenous coconut shell based activated carbon-CO2 pair [Analyse thermodynamique des cycles de refroidissement à adsorption mono-étagés et bi-étagés à simple effet fonctionnant avec un couple constitué de charbon actif à base de noix de coco indigène et de CO2] | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2020 | Failure Analysis of Unidirectional Ceramic Matrix Composite Lamina and Cross-Ply Laminate under Fiber Direction Uniaxial Tensile Load: Cohesive Zone Modeling and Brittle Fracture Mechanics Approach | Sharma, A.; Kasera, Anmol; Upadhyay, Nirbhay Kr |
| 2016 | A 4PRP redundant parallel planar manipulator for the purpose of lower limb rehabilitation | Mohan, Santhakumar |
| 2014 | Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation | Agarwal, Rahul |
| 2016 | Analysis of Three-Region Conduction-Controlled Rewetting of a Hot Surface by Variational Method | Sahu, Santosh Kumar |
| 2017 | Metal hydrides for energy applications – classification, PCI characterisation and simulation | Sharma, V.K.; Emadabathuni, Anil Kumar |
| 2012 | A nonlinear task space tracking control of an underactuated underwater vehicle | Mohan, Santhakumar |
| 2019 | Modeling and Prediction of Residual Stresses in Additive Layer Manufacturing by Microplasma Transferred Arc Process Using Finite Element Simulation | Jain, Neelesh Kumar |
| 2021 | Influence of heat treatment on the structure and martensitic transformation in NiTi alloy produced by wire arc additive manufacturing | Palani, Anand Iyamperumal; Singh, Shalini; Mani Prabu, S. S.; Jayachandran, Shanthi |
| 2019 | Nucleate boiling heat transfer performance of laser textured copper surfaces | Nirgude, Vishal V.; Sahu, Santosh Kumar |
| 2021 | Comparing different multibody reactive potentials for the elastic properties and nonlinear mechanics of the carbon nanostructures | Singh, Sandeep |
| 2014 | Condition based optimal maintenance strategy for multi-component system | Lad, Bhupesh Kumar |
| 2015 | Coordinated motion control in task space of an autonomous underwater vehicle-manipulator system | Mohan, Santhakumar |
| 2019 | Multiple failure behaviors identification and remaining useful life prediction of ball bearings | Lad, Bhupesh Kumar |
| 2021 | Numerical investigation of cross plate fin heat sink integrated with phase change material for cooling application of portable electronic devices | Kumar, Anuj; Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh; Paulraj, Maheandera Prabu |
| 2020 | Structure of a 3D frame-bridge niti sample deposited on a low carbon steel substrate by wire arc additive manufacturing | Palani, Anand Iyamperumal; Mani Prabu, S. S.; Jayachandran, Shanthi |
| 2014 | Disturbance observer based terminal sliding mode control of an underwater manipulator | Mohan, Santhakumar |
| 2020 | Development of Sn-doped ZnO based ecofriendly piezoelectric nanogenerator for energy harvesting application | Manikandan, M.; Pandey, Rajagopalan; Patra, Nandini; Jayachandran, Shanthi; Muralidharan, M.; Mani Prabu, S. S.; Palani, Anand Iyamperumal; Singh, Vipul |
| 2021 | Effect of circular pin-fins geometry and their arrangement on heat transfer performance for laminar flow in microchannel heat sink | Kumar, Rajan |
| 2012 | Influence of ZnO buffer layer on growth of Sb doped ZnO nano wires using nano particle assisted pulsed laser deposition (NAPLD) using Sb as catalyst | Palani, Anand Iyamperumal |
| 2021 | Strain and defect engineering of graphene for hydrogen storage via atomistic modelling | Kag, Deepak; Luhadiya, Nitin; Kundalwal, Shailesh |
| 2019 | Transversely isotropic elastic properties of vacancy defected boron nitride nanotubes using molecular dynamics simulations | Choyal, Vijay K.; Choyal, Vijay K.; Kundalwal, Shailesh |
| 2019 | A New Technique of Gear Mesh Stiffness Measurement Using Experimental Modal Analysis | Parey, Anand |
| 2018 | Review on micromechanics of nano- and micro-fiber reinforced composites | Kundalwal, Shailesh |
| 2018 | Understanding of bubble growth at nucleation site using energy based non-dimensional numbers and their impact on critical heat flux condition in microchannel | Kumar, Ritunesh |
| 2020 | Studies on development of NiTi-integrated optical fiber sensor and its life cycle behavior | Singh, Shalini; S, Karthick; Chittora, Nishita; Brolin, A.; Palani, Anand Iyamperumal |
| 2020 | Thermal Energy Harvesting Capabilities in Lead-Free Ba0.85Ca0.15Ti0.9−xSnxZr0.10O3 Ferroelectric Ceramics | Patel, Satyanarayan |
| 2018 | Effect of subcooling and nozzle diameter on heat transfer characteristics of downward facing hot surfaces using mist jet | Sharma, Avadhesh Kumar; Soni, Anirudh; Sahu, Santosh Kumar |
| 2019 | Effect of atom vacancies on elastic and electronic properties of transversely isotropic boron nitride nanotubes: A comprehensive computational study | Choyal, Vijay K.; Choyal, Vijay K.; Kundalwal, Shailesh |
| 2020 | Transversely isotropic elastic properties of multi-walled boron nitride nanotubes under a thermal environment | Choyal, Vijay K.; Kundalwal, Shailesh |
| 2018 | On the onset of vortex shedding past a two-dimensional porous square cylinder | Anirudh, K.; Shanmugam, Dhinakaran |
| 2019 | A novel integrated tool condition monitoring system | Lad, Bhupesh Kumar |
| 2021 | Investigations on Bending Characteristics of Soft Mesh Structure using Shape Memory Alloy Spring Towards Bio-Inspired Robotic Applications | Muralidharan, M.; Brolin, A.; Palani, Anand Iyamperumal |
| 2018 | Dual Integral Sliding Mode Control Loop for Mechanical Error Correction in Trajectory-Tracking of a Planar 3-PRP Parallel Manipulator | Mohan, Santhakumar |
| 2020 | Product quality driven auto-prognostics: Low-cost digital solution for SMEs | Dhada, Maharshi Harshadbhai; Lad, Bhupesh Kumar |
| 2021 | Selection of phase-change material for thermal management of electronic devices using multi-attribute decision-making technique | Kumar, Anuj; Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2019 | Comprehensive analysis of melting and solidification of a phase change material in an annulus | Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2016 | Thermal hybrid machining processes | Jain, Neelesh Kumar |
| 2020 | Predictive modelling and parametric optimization of minimum quantity lubrication–assisted hobbing process | Kharka, Vishal; Jain, Neelesh Kumar |
| 2021 | Experimental investigation of the effect of inclination angle on the performance of phase change material based finned heat sink | Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2019 | Conjugate heat transfer enhancement of laminar slot jets with various nanofluids on an array of protruding hot sources using MPM approach | Paulraj, Maheandera Prabu; Sahu, Santosh Kumar |
| 2016 | Experimental investigation of rewetting during quenching of hot surface by round jet impingement using Al2O3-water nanofluids | Sharma, Avadhesh Kumar; Sahu, Santosh Kumar |
| 2017 | Review of Gear Finishing Processes | Jain, Neelesh Kumar; Petare, Anand C. |
| 2020 | Electrocaloric properties of Sr and Sn doped BCZT lead-free ceramics | Patel, Satyanarayan |
| 2021 | Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications | Karna, Pravin; Mani Prabu, S. S.; Jayachandran, Shanthi; Palani, Anand Iyamperumal |
| 2019 | Proposition of modified convection boundedness criterion and its evaluation for the development of bounded schemes | Chourushi, T. |
| 2020 | Extraction of weak fault transients using variational mode decomposition for fault diagnosis of gearbox under varying speed | Parey, Anand |
| 2021 | Numerical Simulation of PCM-Based Heat Sink with Plate Fins for Thermal Management of Electronic Components | Kumar, Anuj; Kothari, Rohit; Singh, Pushpanjay K.; Paulraj, Maheandera Prabu; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2020 | Comparing the capabilities of transfer learning models to detect skin lesion in humans | Kankar, Pavan Kumar; Pachori, Ram Bilas |
| 2018 | Sustainability formation of machine cells in group technology systems using modified artificial bee colony algorithm | Paulraj, Maheandera Prabu |
| 2017 | Measurement of CO2 adsorption kinetics on activated carbons suitable for gas storage systems | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2014 | Twenty first century cooling solution: Microchannel heat sinks | Kumar, Ritunesh |
| 2014 | Comparative study of wire-EDM and hobbing for manufacturing high-quality miniature gears | Jain, Neelesh Kumar |
| 2016 | Recent developments in sustainable manufacturing of gears: A review | Jain, Neelesh Kumar |
| 2017 | Effect of H2 flow rate and stand-off distance on the formation of phases in plasma-sprayed Al2O3 coatings | Chatterjee, Satyajit; Sabiruddin, Kazi |
| 2017 | Forced convective heat transfer of nanofluids around a circular bluff body with the effects of slip velocity using a multi-phase mixture model | Shanmugam, Dhinakaran |
| 2018 | Integrating GLL-Weibull Distribution Within a Bayesian Framework for Life Prediction of Shape Memory Alloy Spring Undergoing Thermo-mechanical Fatigue | Nath, Tameshwer; Palani, Anand Iyamperumal; Lad, Bhupesh Kumar |
| 2021 | A comprehensive investigation on development of lightweight aluminium miniature gears by thermoelectric erosion machining process | Chaubey, Sujeet Kumar; Jain, Neelesh Kumar |
| 2017 | Forward kinematic analysis of the 3-RPRS parallel manipulator | Mohan, Santhakumar |
| 2018 | Heat treatment of plasma sprayed alumina-chromia composite coatings | Namdeo, Akshay; Chatterjee, Satyajit; Sabiruddin, Kazi |
| 2012 | Parametric optimization during wire electrical discharge machining using response surface methodology | Jain, Neelesh Kumar |
| 2020 | Improved mechanical and viscoelastic properties of CNT-composites fabricated using an innovative ultrasonic dual mixing technique | Kundalwal, Shailesh |
| 2018 | Computationally inexpensive and revised normalized weighting factor method for segregated solvers | Chourushi, T. |
| 2016 | Parametric investigations on the influence of nano-second Nd 3+ :YAG laser wavelength and fluence in synthesizing NiTi nano-particles using liquid assisted laser ablation technique | Patra, Nandini; Kumar, Akash; Shiva, S.; Gagrani, Rohit; Rao, H. Sai Pranesh; Anirudh, V. R.; Palani, Anand Iyamperumal; Singh, Vipul |
| 2021 | Enhancement of piezoelectric and flexoelectric response of boron nitride sheet superlattices via interface and defect engineering | Kundalwal, Shailesh; Choyal, Vijay K.; Choyal, Vijay K.; Nevhal, Subhash K.; Luhadiya, Nitin |
| 2021 | Elastocaloric effect in zinc oxide nanowire | Patel, Satyanarayan |
| 2019 | Selective area laser-assisted doping of SiC thin films and blue light electroluminescence | Palani, Anand Iyamperumal |
| 2017 | Analysis of heat transfer in the slip flow region between parallel plates | Sahu, Santosh Kumar |
| 2013 | RSM and ANN modeling approaches for predicting average cutting speed during WEDM of SiCp/6061 Al MMC | Jain, Neelesh Kumar |
| 2016 | Comparative Studies on CO2 Adsorption Kinetics by Solid Adsorbents | Singh, Vinod Kumar; Emadabathuni, Anil Kumar |
| 2018 | An Experimental Investigation on Heat Transfer Characteristics of Hot Surface by Using CuO-Water Nanofluids in Circular Jet Impingement Cooling | Sahu, Santosh Kumar |
| 2020 | Mechanical and fracture behavior of MWCNT/ZrO2/epoxy nanocomposite systems: Experimental and numerical study | Kundalwal, Shailesh |
| 2021 | Leverage of environmental pollutant crump rubber on the dry sliding wear response of epoxy composites | Shahapurkar, Pavan |
| 2017 | Condition Monitoring of Gearbox using Experimental Investigation of Acoustic Emission Technique | Parey, Anand |
| 2021 | Bearing fault detection and recognition methodology based on weighted multiscale entropy approach | Kankar, Pavan Kumar |
| 2020 | Control of a vectorial propulsion underwater vehicle considering thruster hydrodynamics constraints and actuator saturation | Kadiyam, Jagadeesh; Mohan, Santhakumar; Deshmukh, Devendra |
| 2017 | An experimental investigation to analyse the heat transfer characteristics of hot surface by obliquely impinging liquid jet | Gupta, Palash; Chandra, Satish; Sahu, Santosh Kumar |
| 2021 | Effect of pulsation on the wall jet flow in the near region of an impinging jet | Yadav, Harekrishna |
| 2018 | Planar liquid volume fraction measurements in air-blast sprays using SLIPI technique with numerical corrections | Kulkarni, Aniket P.; Deshmukh, Devendra |
| 2016 | Studies on Mg+LaNi5 based composites with respect to their suitability towards thermal energy storage | Emadabathuni, Anil Kumar; Madaria, Y. |
| 2020 | Preface | Kankar, Pavan Kumar |
| 2017 | Effect of Shear Work on the Heat Transfer Characteristics of Gaseous Flows in Microchannels | Raj, Poris B.; Sahu, Santosh Kumar |
| 2021 | Nonstoichiometric effect on electrocaloric, pyroelectric and energy storage properties of 0.94NaxBiyTiO3–0.06BaTiO3 bulk ceramics | Saurabh, Nishchay; Patel, Satyanarayan |
| 2022 | Force and vibration analysis in biomechanical preparation of root canals using reciprocating endodontic file system: In vitro study | Thakur, Vinod Singh; Kankar, Pavan Kumar; Parey, Anand |
| 2019 | Review on bubble dynamics in microchannel heat sink | Kumar, Ritunesh |
| 2017 | Spatial drop-sizing in airblast atomization-An experimental study | Kulkarni, Aniket P.; Deshmukh, Devendra |
| 2017 | Critical review of electrochemical honing (ECH): sustainable and alternative gear finishing process. Part 1: conventional processes and introduction to ECH | Jain, Neelesh Kumar |
| 2019 | Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces | Nirgude, Vishal V.; Sahu, Santosh Kumar |
| 2017 | Heat transfer and particle migration in nanofluid flow around a circular bluff body using a two-way coupled Eulerian-Lagrangian approach | Shanmugam, Dhinakaran |
| 2020 | Oxidation behaviour of D-gun sprayed Al2O3-3 wt% SiC coating | Sabiruddin, Kazi |
| 2016 | Electrochemical hybrid machining processes | Jain, Neelesh Kumar |
| 2021 | Fault diagnosis in centrifugal pump using support vector machine and artificial neural network | Ranawat, Nagendra Singh; Kankar, Pavan Kumar; Miglani, Ankur |
| 2016 | Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing | Jain, Neelesh Kumar |
| 2021 | Analysis of indentation size effect (ISE) in nanoindentation hardness in polycrystalline PMN-PT piezoceramics with different domain configurations | Kathavate, Vaibhav S.; Singh, Indrasen; Korimilli, Eswara Prasad |
| 2015 | Inverse dynamics and control of a 3-DOF planar parallel (U-shaped 3-PPR) manipulator | Kiran, Y. Ravi; Mohan, Santhakumar |
| 2015 | Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair | Saxena, Ankur; Parey, Anand |
| 2017 | Theoretical and experimental study on heat transfer characteristics of normally impinging two dimensional jets on a hot surface | Garg, Krati; Srinivasan, Srikaanth; Sahu, Santosh Kumar |
| 2019 | An investigation on D-gun sprayed Al2O3-SiC coatings | Sabiruddin, Kazi |
| 2015 | Robust nonlinear task space position tracking control of an autonomous underwater vehicle-manipulator system | Mohan, Santhakumar |
| 2017 | Critical review of electrochemical honing: sustainable and alternative gear finishing process. Part 2: effects of various process parameters on surface characteristics and material removal rate | Jain, Neelesh Kumar |
| 2015 | Effects of Viscous Dissipation and Rarefaction on Parallel Plates with Constant Heat Flux Boundary Conditions | Sahu, Santosh Kumar |
| 2015 | Investigation on Laser assisted actuation of shape memory alloy based micro-valve | Nath, Tameshwer; Raut, Gaurav; Kumar, Alok; Khatri, Ritesh; Palani, Anand Iyamperumal |
| 2022 | Preface | Kumar, Ritunesh |
| 2016 | Relative analysis of controller effectiveness for vertical plane control of an autonomous underwater vehicle | S, Karthick; Kumar, K. Saran; Mohan, Santhakumar |
| 2020 | Micromechanical FE Analysis of SiCf/SiC Composite with BN Interface | Sharma, A.; Pydi, Yeswanth S. |
| 2021 | Enhancing the piezoelectric properties of boron nitride nanotubes through defect engineering | Kundalwal, Shailesh; Choyal, Vijay K. |
| 2021 | Experimental Investigation of Heat Transfer Enhancement on Impinging Jet Cooling Using Surface Laser Treatment | Paulraj, Maheandera Prabu; Sahu, Santosh Kumar; Sharma, Avadhesh Kumar; Kumar, Anuj; Sengadurai, Karthikeyan; Palani, Anand Iyamperumal |
| 2021 | Investigating the various properties of cold sprayed CuAlNi shape memory alloys developed by post annealing process | Shiva, S.; Palani, Anand Iyamperumal |
| 2021 | Investigation of softening induced indentation size effect in Nanoglass and Metallic glasss | Hirmukhe, S. S.; Korimilli, Eswara Prasad; Singh, Indrasen |
| 2019 | Evaluating the performance of signal processing techniques to diagnose fault in a reciprocating compressor under varying speed conditions | Parey, Anand |
| 2017 | Review of miniature gear manufacturing | Jain, Neelesh Kumar; Chaubey, Sujeet Kumar |
| 2016 | An Experimental Study on the Rewetting of a Hot Vertical Surface by Circular Water Jet Impingement | Sahu, Santosh Kumar |
| 2017 | Effect of mesh stiffness of healthy and cracked gear tooth on modal and frequency response characteristics of geared rotor system | Saxena, Ankur; Parey, Anand |
| 2021 | Experimental Investigation of Sound-Absorbing Material of Different Surface Shapes on Noise Reduction Performance of an Acoustic Enclosure | Gupta, Pavan; Parey, Anand |
| 2021 | Flexocaloric effect in ferroelectric materials: methods of indirect evaluation | Patel, Satyanarayan |
| 2017 | Electrochemical Processing and Surface Finish | Jain, Neelesh Kumar |
| 2016 | Nanofluid flow and heat transfer around a circular cylinder: A study on effects of uncertainties in effective properties | Shanmugam, Dhinakaran |
| 2012 | Prediction of surface roughness during wire electrical discharge machining of SiCp/6061 Al metal matrix composite | Jain, Neelesh Kumar |
| 2016 | Effect of gear tooth faults on time varying mesh stiffness of spur gear pair | Saxena, Ankur; Parey, Anand |
| 2014 | Measurement and analysis of reaction kinetics of la - Based hydride pairs suitable for metal hydride - Based cooling systems | Sharma, V.K.; Emadabathuni, Anil Kumar |
| 2016 | Numerical investigation of heat transfer in extended surface microchannels | Yadav, Vikas; Kumar, Ritunesh |
| 2018 | 3D-finite element simulation and image processing based prediction of width and height of single-layer deposition by micro-plasma-transferred arc process | Jain, Neelesh Kumar |
| 2018 | Development and control of a new sitting-type lower limb rehabilitation robot | Mohan, Santhakumar |
| 2018 | Dual-loop motion control for geometric errors and joint clearances compensation of a planar 2-PRP+1-PPR manipulator | Mohan, Santhakumar |
| 2020 | Heat transfer and friction factor characteristics of annuli formed by the smooth inner tube and corrugated outer tube–An experimental study | Yadav, Saurabh; Sahu, Santosh Kumar |
| 2015 | Vibration reduction of juicer: A case study | Parey, Anand |
| 2021 | Thermal performance of heat sink using nano-enhanced phase change material (NePCM) for cooling of electronic components | Kumar, Anuj; Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2021 | Condition Monitoring in Additive Manufacturing Using Support Vector Machine | Kankar, Pavan Kumar |
| 2020 | Buckling load for telescopic cylinder using successive approximation method | Gupta, Sumit Kumar; Prakash, Jatin; Kankar, Pavan Kumar |
| 2021 | Numerical and experimental analysis of heat transfer in inductive conduction based wire metal deposition process | Kankar, Pavan Kumar |
| 2012 | Structural and optical properties of Sb-Al co-doped ZnO nanowires synthesized using Nanoparticle Assisted Pulsed Laser Deposition (NAPLD) with Sb as catalyst | Palani, Anand Iyamperumal |
| 2018 | Error modelling and sensitivity analysis of a planar 3-PRP parallel manipulator | Mohan, Santhakumar |
| 2021 | Effect of uniaxial stress on energy harvesting, storage and electrocaloric performance of BZT ceramics | Patel, Satyanarayan; Yadav, Harekrishna |
| 2021 | Parametric investigation on laser micro-patterned CuAlNi Shape-memory alloy (SMA) bimorph micromirror and its actuation performance | Jayachandran, Shanthi; Karna, Pravin; Gangwar, Kaushal; Kaithwas, Ankit; Palani, Anand Iyamperumal |
| 2017 | Robust non-singular fast terminal sliding mode task-space position tracking control of an underwater vehicle-manipulator system | Mohan, Santhakumar |
| 2020 | Influence of quaternary alloying addition on transformation temperatures and shape memory properties of Cu–Al–Mn shape memory alloy coated optical fiber | S, Karthick; Singh, Shalini; Mani Prabu, S. S.; Khan, Suhel; Vandan, Agarwal; Palani, Anand Iyamperumal |
| 2021 | Analysis of novel induction heating extruder for additive manufacturing using aluminum filament | Kankar, Pavan Kumar |
| 2020 | An Economic Design and Development of the Wire Arc Additive Manufacturing Setup | Khan, Anas Ullah; Madhukar, Yuvraj Kumar |
| 2021 | On the suitability of induction heating system for metal additive manufacturing | Kankar, Pavan Kumar |
| 2020 | Electrical conduction properties of the BZT-BST ceramics | Patel, Satyanarayan; Yadav, Harekrishna |
| 2018 | Transversely isotropic elastic properties of carbon nanotubes containing vacancy defects using MD | Kundalwal, Shailesh; Choyal, Vijay K. |
| 2018 | Parametric investigations on developing copper micropatterns on flexible film using solid state nd:yag 532nm laser induced forward transfer | Sood, Punkit; Jayachandran, Shanthi; Pandey, Rajagopalan; Akash, K.; Singh, Vipul; Palani, Anand Iyamperumal |
| 2017 | Influence of process parameters on the formation of phases and mechanical properties of plasma sprayed Al2O3–Cr2O3 coatings | Chatterjee, Satyajit; Sabiruddin, Kazi |
| 2021 | Investigation of hydrogen adsorption behavior of graphene under varied conditions using a novel energy-centered method | Luhadiya, Nitin; Kundalwal, Shailesh; Sahu, Santosh Kumar |
| 2019 | Thermo-mechanical behavior of shape memory alloy spring actuated using novel scanning technique powered by ytterbium doped continuous fiber laser | Mani Prabu, S. S.; Muralidharan, M.; Nath, Tameshwer; Brolin, A.; Kumar, Akash; Palani, Anand Iyamperumal |
| 2020 | A novel method to classify bearing faults by integrating standard deviation to refined composite multi-scale fuzzy entropy | Kankar, Pavan Kumar |
| 2017 | Heat transfer characteristics of downward facing hot horizontal surfaces using MIST JET impingement | Yadav, Ashutosh Kumar; Sharma, Parantak; Sharma, Avadhesh Kumar; Nirgude, Vishal V.; Sahu, Santosh Kumar |
| 2021 | Experimental Study for the Health Monitoring of Milling Tool Using Statistical Features | Chaudhari, Akanksha; Kankar, Pavan Kumar; Verma, Girish Chandra |
| 2020 | Infrared Thermal Imaging Technique for Temperature Measurement in Various Energy Systems | Sharma, Avadhesh Kumar; Sahu, Santosh Kumar |
| 2018 | Kinematic and dynamic performance investigations of asymmetric (U-shape fixed base) planar parallel manipulators | Mohan, Santhakumar |
| 2017 | Experimental measurement of spur gear mesh stiffness using digital image correlation technique | Parey, Anand |
| 2021 | Evaluation of microstructural, mechanical, and tribological characteristics of Ni-B-W-SiC electroless composite coatings involving multi-pass scratch test | Nemane, Vaibhav; Chatterjee, Satyajit |
| 2016 | Investigations on surface quality, surface integrity and specific energy consumption in finishing of straight bevel gears by PECH process | Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2012 | Indirect adaptive control of an autonomous underwater vehicle-manipulator system for underwater manipulation tasks | Mohan, Santhakumar |
| 2019 | Multiscale surface texture and fractal analysis of straight bevel gears finished by PECH and PECF process | Jain, Neelesh Kumar |
| 2019 | Analysis and multi-response optimization of gear quality and surface finish of meso-sized helical and bevel gears manufactured by WSEM process | Chaubey, Sujeet Kumar; Jain, Neelesh Kumar |
| 2017 | Integrated production and maintenance planning for parallel machine system considering cost of rejection | Kumar, Sandeep; Lad, Bhupesh Kumar |
| 2017 | Modelling of acoustic emission generated by crack propagation in spur gear | Parey, Anand |
| 2017 | Gearbox fault diagnosis under fluctuating load conditions with independent angular re-sampling technique, continuous wavelet transform and multilayer perceptron neural network | Singh, Amandeep; Parey, Anand |
| 2017 | Effect of applied voltage and electrolyte parameters on pitch, runout, flank topology, and finishing productivity of the straight bevel gears in PECH process | Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2016 | Effect of heat transfer enhancement on the performance of metal hydride based hydrogen compressor | Madaria, Y.; Emadabathuni, Anil Kumar |
| 2018 | Performance of pulsed-electrochemical honing and pulsed-electrochemical finishing in improving quality of bevel gears | Jain, Neelesh Kumar |
| 2016 | Dynamic modelling approaches for a 3-PPR planar parallel manipulator | Mohan, Santhakumar |
| 2016 | Experimental study on heat transfer characteristics circular jet impingement boiling on the variety of structured copper surfaces in stagnation zone | Nirgude, Vishal V.; Sharma, Avadhesh Kumar; Sahu, Santosh Kumar |
| 2018 | Laser annealing of laser additive–manufactured Ni-Ti structures: An experimental–numerical investigation | Shiva, S.; Palani, Anand Iyamperumal |
| 2019 | Investigations on performance viability of NiTi, NiTiCu, CuAlNi and CuAlNiMn shape memory alloy/Kapton composite thin film for actuator application | Jayachandran, Shanthi; Kumar, Akash; Mani Prabu, S. S.; Manikandan, M.; Muralidharan, M.; Brolin, A.; Palani, Anand Iyamperumal |
| 2015 | Experimental investigation of heat transfer characteristics of the hot surface using Al2O3-water nanofluids | Srinivasan, Srikaanth; Garg, Krati; Agarwal, Manish K.; Sahu, Santosh Kumar |
| 2022 | A data-driven strategy using long short term memory models and reinforcement learning to predict building electricity consumption | Kumar, Ritunesh |
| 2017 | Effect of immobilization technique on performance ZnO nanorods based enzymatic electrochemical glucose biosensor | Shukla, Mayoorika; Pramila; Palani, Anand Iyamperumal; Singh, Vipul |
| 2021 | Detection of Fault in a Bevel Gearbox Under Varying Speed Conditions | Parey, Anand |
| 2020 | Investigation of pressure sensitive plastic flow in nanoglasses from finite element simulations | Hirmukhe, S. S.; Korimilli, Eswara Prasad; Singh, Indrasen |
| 2015 | Parametric Investigation in Laser Forming of 8mm FE-410 Plate Using High Power CO2 Laser and Its Bend Angle Prediction | Souza, Agnel D.; Palani, Anand Iyamperumal |
| 2022 | An Intelligent and Robust Fault Diagnostics for an Electromechanical System Using Vibration and Current Signals | Parey, Anand |
| 2021 | Finite element analysis of femoral prosthesis using Ti-6Al-4 v alloy and TiNbZrTaFe high entropy alloy | Kumar, Pankaj; Jain, Neelesh Kumar |
| 2021 | Thermal performance of phase change material–based heat sink for passive cooling of electronic components: An experimental study | Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2017 | Frequency domain averaging based experimental evaluation of gear fault without tachometer for fluctuating speed conditions | Parey, Anand |
| 2016 | Measurement of thermodynamic properties of ammoniated salts and thermodynamic simulation of resorption cooling system | Sharma, R.; Emadabathuni, Anil Kumar |
| 2022 | Model Based Fault Diagnosis in Bevel Gearbox | Dewangan, Palash; Ramteke, Dada Saheb; Parey, Anand |
| 2018 | Application of Paraffin Based Nanocomposite in Heat Pipe Module for Electronic Equipment Cooling | Nirgude, Vishal V.; Sahu, Santosh Kumar |
| 2015 | Influence of dynamic operating conditions on the performance of metal hydride based solid sorption cooling systems | Sharma, V.K.; Emadabathuni, Anil Kumar |
| 2016 | Experimental measurement of gear mesh stiffness of cracked spur gear by strain gauge technique | Parey, Anand |
| 2017 | Robust task-space control of an autonomous underwater vehicle-manipulator system by PID-like fuzzy control scheme with disturbance estimator | Mohan, Santhakumar |
| 2017 | Performance evaluation of simple and heat recovery adsorption cooling system using measured NH3 sorption characteristics of halide salts | Sharma, R.; Emadabathuni, Anil Kumar |
| 2016 | Robust nonlinear PID-like fuzzy logic control of a planar parallel (2PRP-PPR) manipulator | Mohan, Santhakumar |
| 2021 | Design and Development of NiTi Shape Memory Alloy Belt for Waste Heat Energy Recovery System | Jayachandran, Shanthi; Raikwar, Sumeet; Sindam, Nanda Krishna; Madhav, Mandivarapu Thikshan; Apalani, Palani Iyamperumal |
| 2020 | Concurrent Removal of Heat Transfer and Mass Flow Rate Nonuniformities in Parallel Channels of Microchannel Heat Sink | Kumar, Ritunesh; Yadav, Vikas |
| 2018 | Design and Development of wall climbing Hexapod Robot with SMA actuated suction gripper | Sinkar, Avadhoot; Pandey, Aditya; Mehta, Chaitanya; S, Karthick; Jayachandran, Shanthi; Akash, K.; Palani, Anand Iyamperumal |
| 2018 | Recurrent Neural Networks for real-time distributed collaborative prognostics | Bakliwal, Kshitij; Dhada, Maharshi Harshadbhai |
| 2018 | Comparison of AMSR-2 wind speed and sea surface temperature with moored buoy observations over the northern Indian ocean | Kadiyam, Jagadeesh |
| 2016 | An experimental study on the dehumidification performance of a counter flow liquid desiccant dehumidifier [Une étude expérimentale de la performance de déshumidification d'un déshumidificateur à déshydratant liquide à contre-courant] | Kumar, Ritunesh |
| 2018 | Experimental and numerical investigations on spray characteristics of fatty acid methyl esters | Lanjekar, R. D.; Deshmukh, Devendra |
| 2020 | Actuator fault-tolerant control study of an underwater robot with four rotatable thrusters | Kadiyam, Jagadeesh; Parashar, Anjali; Mohan, Santhakumar; Deshmukh, Devendra |
| 2021 | Numerical analysis of the performance improvement of a flat-plate solar collector using conjugated porous blocks | Anirudh, K.; Shanmugam, Dhinakaran |
| 2021 | Influence of laser-nitriding on mechanical and elevated temperature fretting wear behavior of A356-alloy | Kulkarni, Achyuth Rao; Manikandan, M.; Palani, Anand Iyamperumal; Murugesan, Jayaprakash |
| 2013 | Reliability and maintenance based design of machine tools | Lad, Bhupesh Kumar |
| 2021 | Optimization of process parameters in micro-plasma transferred arc deposition process for cobalt-based alloy | Kumar, Pankaj; Jain, Neelesh Kumar |
| 2017 | Investigations on wear characteristics of Stellite coating by micro-plasma transferred arc powder deposition process | Jain, Neelesh Kumar |
| 2021 | Cyclostationary Analysis-Based Gearbox Fault Diagnosis Under Varying Speed | Parey, Anand |
| 2015 | Parametric investigation on laser forming of 3mm and 5mm FE-410 sheets for brake pedal and clutch pedal applications | D'Souza, Agnel; Palani, Anand Iyamperumal |
| 2021 | An experimental investigation of the effect of thermal coupling between parallel microchannels undergoing boiling on the Ledinegg instability-induced flow maldistribution | Miglani, Ankur |
| 2014 | An analysis of a Three-Region conduction controlled rewetting of hot surface by Variational Method | Garg, Krati; Singh, Aditya; Sahu, Santosh Kumar |
| 2017 | Experimental investigation of maldistribution in vertical plate falling film tower | Kumar, Ritunesh |
| 2017 | Investigations on transformer oil temperature sensing using CuAlNi/polyimide shape memory alloy composite film | Kumar, Akash; Chandan, K.; Parikshit, G.; Narayane Dhiraj, C.; Disawal, Reena; Lad, Bhupesh Kumar; Singh, Vipul; Palani, Anand Iyamperumal |
| 2013 | Investigation into the dynamics and control of an underwater vehicle-manipulator system | Mohan, Santhakumar |
| 2019 | Gearbox fault diagnosis under non-stationary conditions with independent angular re-sampling technique applied to vibration and sound emission signals | Singh, Amandeep; Parey, Anand |
| 2014 | Advanced materials for solid state hydrogen storage: "Thermal engineering issues" | Emadabathuni, Anil Kumar |
| 2021 | ADHESIVE AND VISCOELASTIC RESPONSE OF MWCNT/ZRO2 HYBRID EPOXY NANOCOMPOSITES | Kundalwal, Shailesh |
| 2018 | Investigation on hot fluid based actuation of SMA spring and their application for the development of heat engine | Verma, Anita; Anand, K.; Hari, V. M.; Nath, Tameshwer; Palani, Anand Iyamperumal |
| 2019 | Planar liquid volume fraction and SMD distribution of Jatropha vegetable oil spray: effect of ethanol blending and GLR | Kulkarni, Aniket P.; Deshmukh, Devendra |
| 2021 | To investigate the influence of sound-absorbing materials on the transmission loss of double-wall panel | Gupta, Pavan; Parey, Anand |
| 2021 | Enhancing methane production in anaerobic digestion through hydrogen assisted pathways – A state-of-the-art review | Kumar, Ritunesh |
| 2016 | Effective thermal conductivity of reactive packed beds of hydriding materials | Madaria, Y.; Emadabathuni, Anil Kumar |
| 2020 | CFD analysis in a heating bed with two inlets and one outlet cooling configuration for application in AM process | Kankar, Pavan Kumar |
| 2017 | Linear reciprocating wear behaviour of plasma-sprayed Al2O3–Cr2O3 coatings at different loading and sliding conditions | Chatterjee, Satyajit; Sabiruddin, Kazi |
| 2017 | Error analysis and control scheme for the error correction in trajectory-tracking of a planar 2PRP-PPR parallel manipulator | Mohan, Santhakumar |
| 2021 | Investigations on NiTi shape memory alloy thin wall structures through laser marking assisted wire arc based additive manufacturing | Singh, Shalini; Palani, Anand Iyamperumal |
| 2019 | Performance intensification of regeneration process for non-corrosive plastic plate vertical falling film tower | Kumar, Ritunesh |
| 2015 | PID-like fuzzy logic control scheme for control of a planar parallel (3PPR U-base) manipulator | Mohan, Santhakumar |
| 2012 | A null space control of an underactuated underwater vehicle-manipulator system under ocean currents | Mohan, Santhakumar |
| 2019 | Analysis of solidification in a finite PCM storage with internal fins by employing heat balance integral method | Kothari, Rohit; Sahu, Santosh Kumar; Kundalwal, Shailesh |
| 2019 | Experimental investigations on surface finish and microgeometry of helical gear in pulsed-electrochemical honing process | Jain, Neelesh Kumar |
| 2016 | Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects | Saxena, Ankur; Parey, Anand |
| 2021 | A Robust Motion Control Scheme of an Underwater Robot with Tiltable Thrusters | Kadiyam, Jagadeesh; Mohan, Santhakumar; Deshmukh, Devendra |
| 2017 | Design, development and control of a 2PRP-2PPR planar parallel manipulator for lower limb rehabilitation therapies | Mohan, Santhakumar |
| 2020 | On the prediction of the bi-axial failure envelope of a UD CFRP composite lamina using computational micromechanics: Effect of microscale parameters on macroscale stress–strain behavior | Sharma, A. |
| 2021 | Flow field characteristics of a confined, underexpanded transient round jet | Yadav, Harekrishna |
| 2019 | Exploring the functional and corrosion behavior of friction stir welded NiTi shape memory alloy | Mani Prabu, S. S.; Khan, Suhel; Jayachandran, Shanthi; Manikandan, M.; Palani, Anand Iyamperumal |
| 2021 | Engineered nanomaterials for aviation industry in COVID-19 context: A time-sensitive review | Jain, Neelesh Kumar |
| 2021 | Heat transfer characteristics of flat and concave surfaces by circular and elliptical jet impingement | Joshi, Jaykumar; Sahu, Santosh Kumar |
| 2019 | Implementation of a robust motion control scheme for an Ostraciiform inspired underwater robot with caudal and pectoral fins | Kadiyam, Jagadeesh; Mehta, Chaitanya; Mohan, Santhakumar; Deshmukh, Devendra |
| 2015 | An integrated approach for fleet level maintenance planning | Lad, Bhupesh Kumar |
| 2015 | Robust PID control for position tracking of an underwater manipulator | Mohan, Santhakumar |
| 2022 | Effect of porous auxetic structures on low-frequency piezoelectric energy harvesting systems: a finite element study | Saurabh, Nishchay; Patel, Satyanarayan |
| 2018 | Capabilities evaluation of WSEM, milling and hobbing for meso-gear manufacturing | Chaubey, Sujeet Kumar; Jain, Neelesh Kumar |
| 2015 | Spark erosion machining of miniature gears: a critical review | Jain, Neelesh Kumar |
| 2015 | Process Performance Comparison of ECH and PECH for Quality Enhancement of Bevel Gears | Jain, Neelesh Kumar; Palani, Anand Iyamperumal |
| 2021 | Fault diagnosis of gearbox based on ITD-tunable Q-factor wavelet transform | Kankar, Pavan Kumar |
| 2017 | Robust proportional derivative (PD)-like fuzzy control designs for diving and steering planes control of an autonomous underwater vehicle | Mohan, Santhakumar |
| 2021 | Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing | Palani, Anand Iyamperumal; Mani Prabu, S. S.; Manikandan, M.; Jayachandran, Shanthi; Sahu, Anshu |
| 2016 | Heat Transfer Enhancements of Low Volume Concentration CNT/Water Nanofluid and Wire Coil Inserts in a Circular Tube | Nirgude, Vishal V.; Gharge, Prajakta D.; Mayank, Modak; Sahu, Santosh Kumar |
| 2018 | Thermodynamic Analysis of Two Stage Metal Hydride Based Hydrogen Compressor | Sharma, V.K.; Emadabathuni, Anil Kumar |
| 2018 | Lattice Boltzmann simulations of flow and heat transfer from a permeable triangular cylinder under the influence of aiding buoyancy | Anirudh, K.; Shanmugam, Dhinakaran |
| 2018 | The heat transfer characteristics and rewetting behavior of hot horizontal downward facing surface by round water jet impingement | Sharma, Avadhesh Kumar; Sahu, Santosh Kumar |
| 2021 | Bubble dynamics in microchannel: An overview of the state-of-the-art | Kumar, Ritunesh |
| 2018 | A New Approach for the Mitigating of Flow Maldistribution in Parallel Microchannel Heat Sink | Kumar, Ritunesh |
| 2021 | Preface | Kankar, Pavan Kumar |
| 2019 | Effect of microchannel heat sink configuration on the thermal performance and pumping power | Kumar, Rajan |
| 2019 | Investigation on actuation characteristics of tailor-made NiTi shape memory alloy structures fabricated through wire arc additive manufacturing (WAAM) technique | Palani, Anand Iyamperumal; Mani Prabu, S. S.; Manikandan, M.; Thakur, Vinod Singh; Sahu, Ankita; Singh, Shalini |
| 2018 | Investigating the value of integrated operations planning: A case-based approach from automotive industry | Kumar, Sandeep; Purohit, Bhushan S.; Lad, Bhupesh Kumar |
| 2013 | Effect of silver coating on silicon ingot slicing by wire-EDM process | Padwal, Parth S. |
| 2020 | Mesh Stiffness Variation Due to the Effect of Back-Side Contact of Gears | Kankar, Pavan Kumar |
| 2021 | Multiscale based finite element modeling for the nonlinear bending and postbuckling analyses of some noncarbon nanomaterials | Singh, Sandeep |
| 2020 | Evaluation of effective properties for smart graphene reinforced nanocomposite materials | Gupta, Madhur; Kundalwal, Shailesh |
| 2012 | Improving biodegradability and biogas production of wheat straw substrates using sodium hydroxide and hydrothermal pretreatments | Kumar, Ritunesh |
| 2021 | An experimental study on heat transfer of different aqueous surfactant solutions horizontal impinging jet using infrared thermography | Sahu, Santosh Kumar |
| 2019 | Challenges in charge preparation and combustion in homogeneous charge compression ignition engines with biodiesel: A review | Chaudhari, Vasudev D.; Deshmukh, Devendra |
Collection's Items (Sorted by Submit Date in Descending order): 501 to 1000 of 1286
