Please use this identifier to cite or link to this item:
https://dspace.iiti.ac.in/handle/123456789/15490
| Title: | Laser Polishing of Wire Arc Additive Manufactured SS316L |
| Authors: | Thakur, Vinod Singh M, Manikandan Singh, Shalini Mishra, Shivam Kaithwas, Ankit Mani Prabu, S. S. Palani, Anand Iyamperumal |
| Keywords: | Laser polishing;Optical microscopy;SS316L;Surface roughness;Wire arc additive manufacturing |
| Issue Date: | 2020 |
| Publisher: | Springer Nature |
| Citation: | Thakur, V. S., Manikandan, M., Singh, S., Mishra, S., Kaithwas, A., Mani Prabu, S. S., & Palani, I. A. (2020). Laser Polishing of Wire Arc Additive Manufactured SS316L. In M. S. Shunmugam & M. Kanthababu (Eds.), Advances in Additive Manufacturing and Joining (pp. 127–135). Springer Singapore. https://doi.org/10.1007/978-981-32-9433-2_10 |
| Abstract: | This paper elucidates the surface analysis of laser polished SS316L samples fabricated using wire arc additive manufacturing (WAAM). The fabricated WAAM samples were polished using Nd: YAG laser source of wavelength 1064 nm at different power and the various number of passes such viz. 10 W, 10 W, and 25 W, and 8, 10, and 15, respectively. The roughness measurement was performed on before and after laser polishing by an optical profilometer and found that 40% of roughness was reduced after laser polishing. The crystal phase changes and hardness were also carried out and validated using XRD and hardness of the laser polished samples. © 2020, Springer Nature Singapore Pte Ltd. |
| URI: | https://doi.org/10.1007/978-981-32-9433-2_10 https://dspace.iiti.ac.in/handle/123456789/15490 |
| ISSN: | 2522-5022 |
| Type of Material: | Book Chapter |
| Appears in Collections: | Department of Chemistry Department of Mechanical Engineering |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Altmetric Badge: