Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/19544
Title: Development of vacuum and magnetically assisted μ-plasma powder additive manufacturing (VMA-μ-PPAM) process for biomedical materials
Authors: Ravi Ranjan
Supervisors: Jain, Neelesh Kumar
Sawant, Mayur S.
Keywords: Mechanical Engineering
Issue Date: 28-May-2026
Publisher: Department of Mechanical Engineering, IIT Indore
Series/Report no.: MT583;
Abstract: Vacuum- and magnetic field-assisted additive manufacturing technologies have recently gained significant attention for the fabrication of high-performance metallic components due to their ability to improve melt pool stability, reduce porosity, refine microstructure, and enhance mechanical properties. In the present work, a vacuum- and magnetic field-assisted micro-plasma powder additive manufacturing (μ-PPAM) system was developing by integrating a specially designed vacuum chamber, electromagnet setup, vacuum pump, suction filtration unit, and vaccum measuring devices. The vacuum environment was utilized to minimize oxidation, atmospheric contamination, and porosity during deposition, while the externally applied magnetic field was employed to improve molten pool convection, powder flow behavior, and microstructural refinement during fabrication. The magnetic flux density generated by the electromagnet was characterized under different applied voltages using a calibrated gaussmeter, and a nearly linear increase in magnetic flux density was observed with increasing voltage. Titanium-based biomaterials are widely used in orthopaedic and dental implant applications because of their excellent biocompatibility, high specific strength, and superior corrosion resistance. However, conventional implant materials such as stainless steel, Co–Cr alloys, commercially pure titanium (CP-Ti), and Ti–6Al–4V possess several limitations including stress shielding effect, release of toxic ions, poor antibacterial behavior, allergic reactions, and implant-associated infections. Furthermore, the higher elastic modulus of conventional titanium alloys compared to human cortical bone often leads to improper load transfer and implant failure. Therefore, the development of advanced β-titanium alloys containing non-toxic alloying elements with superior mechanical and biological performance is essential for next generation biomedical implants.
URI: https://dspace.iiti.ac.in/handle/123456789/19544
Type of Material: Thesis_M.Tech
Appears in Collections:Department of Mechanical Engineering_ETD

Files in This Item:
File Description SizeFormat 
MT_583_Ravi_Ranjan_2402103011.pdf7.99 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: