Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/493
Title: Organic-inorganic solar cell
Authors: Singh, Ashima
Supervisors: Shirage, Parasharam M.
Keywords: Metallurgy Engineering and Materials Science
Issue Date: 4-Jul-2017
Publisher: Department of Metallurgy Engineering and Materials Science, IIT Indore
Series/Report no.: MT034
Abstract: The need of energy has increased tremendously in previous years due to industrial, economic development and increase in living standards of people. Fossil fuels are depleting fast due to huge amount of consumption and therefore renewable energy is need of the hour. The sun is one of the most reliable, sustainable and long term source of energy. Solar cells convert solar energy into electricity and are based on photovoltaic e_ect. Many types of solar cells are under research and development and at present single crystalline solar cells with PCE of 30% are widely used for converting solar energy into commercially available electricity but it has high manufacturing cost. Another type of direct bandgap and high PCE based solar cell is gallium arsenide but material cost is too high. Therefore development of new solar cell technologies with low production cost through use of inexpensive and abundant materials is need of the hour. DSCs and Organic-Inorganic Perovskite solar cells overcome the above mentioned drawbacks. Methylammonium Lead Iodide(CH3NH3PbI3) is the perovskite which satis_es all the requirement of an e_cient light harvesting materials in the cell structure. The reported e_ciency of cell with this perovskite is upto 20%. Major drawback of the Perovskite solar cell is the presence Lead in the light harvester layer which is toxic in nature, another drawback is the instability in presence of humidity and high temeperatures. The structure of our cell is FTO=TiO2 nanorods=MAPI=HTM/Al. With the goal of fabricating stable and less toxic perovskite we studied the performance of solar cells fabricated with light harvester as Methylammonium Bismuth Iodide ((CH3NH3)3Bi2I9). This perovskite has Bismuth which is less toxic in nature and comaparatively more stable in ambient conditions. The cell has following layers with Bismuth based perovskite as light harvesting layer, FTO=TiO2nanorods=MABI= Spiro-MeOTAD=Au. The e_ciency of this cell was calculated after one week of fabrication and it showed 0.124% e_ciency.
URI: https://dspace.iiti.ac.in/handle/123456789/493
Type of Material: Thesis_M.Tech
Appears in Collections:Department of Metallurgical Engineering and Materials Science_ETD

Files in This Item:
File Description SizeFormat 
MT_34_Ashima_Singh_1502181001.pdf4.59 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: