Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/5799
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShah, Ambika Prasaden_US
dc.contributor.authorVishvakarma, Santosh Kumaren_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-17T15:44:00Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-17T15:44:00Z-
dc.date.issued2018-
dc.identifier.citationShah, A. P., Yadav, N., Beohar, A., & Vishvakarma, S. K. (2018). Process variation and NBTI resilient schmitt trigger for stable and reliable circuits. IEEE Transactions on Device and Materials Reliability, 18(4), 546-554. doi:10.1109/TDMR.2018.2866695en_US
dc.identifier.issn1530-4388-
dc.identifier.otherEID(2-s2.0-85052695337)-
dc.identifier.urihttps://doi.org/10.1109/TDMR.2018.2866695-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/5799-
dc.description.abstractNegative bias temperature instability (NBTI) is a major time-dependent reliability concern with the pMOS transistor at elevated temperature. NBTI in pMOS is the severe dominating factor of circuit reliability as it increases the threshold voltage with time. In this paper, an nMOS-only Schmitt trigger with a voltage booster (NST-VB) circuit is proposed. The use of only an nMOS transistor in the critical path of the Schmitt trigger circuit drastically reduces the effect of NBTI on the circuit and, hence, improves performance. The proposed circuit is less affected by both inter-die and intra-die process variations in consequence of an nMOS-only structure. Because of NBTI, the increase in delay for the proposed NST-VB circuit is only 0.47% compared to 7.2% and 1.47% for the conventional Schmitt trigger and nMOS inverter, respectively, after the stress time of three years. The proposed NST-VB circuit is also validated with an s27 benchmark circuit from the ISCAS'89 benchmark set and found that it has a lower effect of NBTI compared to CMOS and Schmitt trigger inverter circuits. For the viability of the proposed circuit, figure-of-merit (FOM) is used as a performance metric and it is found that the proposed circuit has {15.11\times } improved FOM compared to the conventional Schmitt trigger circuit. © 2001-2011 IEEE.en_US
dc.language.isoenen_US
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.sourceIEEE Transactions on Device and Materials Reliabilityen_US
dc.subjectBias voltageen_US
dc.subjectConvergence of numerical methodsen_US
dc.subjectDelay circuitsen_US
dc.subjectElectric currentsen_US
dc.subjectElectric invertersen_US
dc.subjectField effect transistorsen_US
dc.subjectHot carriersen_US
dc.subjectIntegrated circuit testingen_US
dc.subjectNanostructured materialsen_US
dc.subjectNegative bias temperature instabilityen_US
dc.subjectNegative temperature coefficienten_US
dc.subjectReliabilityen_US
dc.subjectStabilityen_US
dc.subjectThermal variables controlen_US
dc.subjectThermodynamic stabilityen_US
dc.subjectThreshold voltageen_US
dc.subjectTiming circuitsen_US
dc.subjectTrigger circuitsen_US
dc.subjectFigure of meritsen_US
dc.subjectHot carrier injectionen_US
dc.subjectIntegrated circuit reliabilityen_US
dc.subjectMOS-FETen_US
dc.subjectNegative bias temperature instability (NBTI)en_US
dc.subjectSchmitt triggeren_US
dc.subjectComputer circuitsen_US
dc.titleProcess Variation and NBTI Resilient Schmitt Trigger for Stable and Reliable Circuitsen_US
dc.typeJournal Articleen_US
Appears in Collections:Department of Electrical Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: