1. IDR@IIT Indore
  2. IITI Scholarly Publications
  3. Department of Mechanical Engineering
Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/6830
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNirgude, Vishal V.en_US
dc.contributor.authorSharma, Avadhesh Kumaren_US
dc.contributor.authorSahu, Santosh Kumaren_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-21T10:51:27Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-21T10:51:27Z-
dc.date.issued2016-
dc.identifier.citationModak, M., Nirgude, V., Sharma, A. K., & Sahu, S. K. (2016). Experimental study on heat transfer characteristics circular jet impingement boiling on the variety of structured copper surfaces in stagnation zone. Paper presented at the International Conference on Nuclear Engineering, Proceedings, ICONE, , 5 doi:10.1115/ICONE24-60682en_US
dc.identifier.isbn9784888982566-
dc.identifier.otherEID(2-s2.0-84995745283)-
dc.identifier.urihttps://doi.org/10.1115/ICONE24-60682-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/6830-
dc.description.abstractIn the present work an attempt has been made to study the heat transfer characteristics of single circular jet on a variety of enhanced surfaces. In the present investigation three different copper target surfaces of various surface modifications: bare copper surface, pin fin enhancement surface and a flat surface coated with alumina porous layer. The heat transfer performance of each surface is studied in two phase boiling operation at different flow rates (3959 < Re < 7900). The comparison indicates that both the surface modification have enhanced the boiling heat transfer rates. Copyright © 2016 by ASME.en_US
dc.language.isoenen_US
dc.publisherAmerican Society of Mechanical Engineers (ASME)en_US
dc.sourceInternational Conference on Nuclear Engineering, Proceedings, ICONEen_US
dc.subjectAluminaen_US
dc.subjectAluminum oxideen_US
dc.subjectHeat transferen_US
dc.subjectNuclear engineeringen_US
dc.subjectSurface treatmenten_US
dc.subjectBoiling heat transferen_US
dc.subjectCopper surfaceen_US
dc.subjectCopper targeten_US
dc.subjectEnhanced surfaceen_US
dc.subjectHeat transfer characteristicsen_US
dc.subjectHeat transfer performanceen_US
dc.subjectPorous layersen_US
dc.subjectStagnation zonesen_US
dc.subjectFighter aircraften_US
dc.titleExperimental study on heat transfer characteristics circular jet impingement boiling on the variety of structured copper surfaces in stagnation zoneen_US
dc.typeConference Paperen_US
Appears in Collections:Department of Mechanical Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: