Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique

Abstract

Gear mesh stiffness plays a very important role in gear dynamics and it varies in the presence of gear fault such as crack. The measurement of stress intensity factor can lead to the determination of gear tooth mesh stiffness variation in the presence of crack in a spur gear system. In this paper, the technique of conventional photoelasticity has been revisited to explore the possibility of using it as a supplementary technique to experimentally measure the variation of gear mesh stiffness. An attempt has been made to calculate the variation of mesh stiffness for a pinion having a cracked tooth and a gear tooth with no crack of a spur gear pair. An analytical methodology based on elastic strain energy method in conjunction with total potential energy model has been adopted and implemented within the mesh stiffness calculations. To visualize the state of stress in a structure using finite element and other currently available methods, photoelasticity is considered to be one of the oldest and most developed experimental technique. An experimental methodology based on conventional photo-elasticity technique for computing stress intensity factor (SIF) for cracked spur gear tooth is presented for different single tooth contact position and crack length. The relation between contact position, crack length, crack configuration, SIF and the variation of total effective mesh stiffness have been quantified. Finally, a comparison has been made and the results obtained from finite element method (FEM) based on linear elastic fracture mechanics (LEFM), analytical method and proposed experimental method has been outlined. © 2013 Elsevier Ltd.