Please use this identifier to cite or link to this item:
https://dspace.iiti.ac.in/handle/123456789/7643
Title: | Impact of tungsten on phase evolution in nanocrystalline AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) high entropy alloys |
Authors: | Kumar, Vinod |
Keywords: | Crystallite size;Diffraction;Energy dispersive spectroscopy;Entropy;High-entropy alloys;Mechanical alloying;Morphology;Nanocrystalline powders;Nanocrystals;Particle size analysis;Scanning electron microscopy;Tungsten;Debye-Scherrer formula;Differential scanning calorimetric;Energy dispersive spectroscopies (EDS);Nanocrystallines;Particle morphologies;Phase evolutions;Supersaturated solid solutions;Thermodynamical properties;Nanocrystalline alloys |
Issue Date: | 2017 |
Publisher: | Institute of Physics Publishing |
Citation: | Kumar, D., Maulik, O., Kumar, S., Sharma, V. K., Prasad, Y. V. S. S., & Kumar, V. (2017). Impact of tungsten on phase evolution in nanocrystalline AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) high entropy alloys. Materials Research Express, 4(11) doi:10.1088/2053-1591/aa96df |
Abstract: | The present study describes the synthesis and preliminary characterization of a novel nanocrystalline AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) high entropy alloy (HEA) powders via mechanical alloying (MA). During MA, the formation of a supersaturated solid solution with the formation major BCC 1 and BCC 2 phase with minor FCC fraction in AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) HEAs. The average crystallite size of all HEA powder samples after 20 h of milling was less than 20 nm as determined by using Debye-Scherrer formula. The particle morphology and composition of present HEAs were investigated utilizing scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). TEM-SAED analysis of AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) HEAs concurred with XRD results. Phase and thermodynamical properties have been correlated in the case of AlCuCrFeMnWx (x = 0, 0.05, 0.1 and 0.5 mol) high entropy alloys. Differential scanning calorimetric (DSC) of these alloys suggested that there is no significant phase change occur up to 1000 °C. © 2017 IOP Publishing Ltd. |
URI: | https://doi.org/10.1088/2053-1591/aa96df https://dspace.iiti.ac.in/handle/123456789/7643 |
ISSN: | 2053-1591 |
Type of Material: | Journal Article |
Appears in Collections: | Department of Metallurgical Engineering and Materials Sciences |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Altmetric Badge: