Experimental Study on Optimization of Cementation Solution for Wind‐Erosion Resistance Using the MICP Method

Abstract

In the present study, an environmentally friendly microbial‐induced calcium carbonate precipitation (MICP) technique was explored to reinforce the desert sand using the stopped‐flow pouring method. A detailed experimental study has been conducted with Sporosarcina (S.) pasteurii urease‐producing bacteria with a 0.5 M cementation solution. To optimize the cementation solution, three different pore volumes (PV), i.e., 0.4, 0.6, and 0.8, were considered. The cementation solution was provided every 24 h and considered as one treatment cycle. The cylindrical specimen in three replicas was biotreated for 7, 14, and 21 days in 1:1 and 1:2 (diameter: height) ratios for determination of split‐tensile strength (STS) and unconfined compressive strength (UCS), respectively. Micro-structure characterization of untreated and biotreated sand was also examined using a scanning electron microscope (SEM) and energy‐dispersive X‐ray analysis (EDX). Rocklike behavior was observed for biotreated‐sand samples using the UPV test. Test results for 21 days with 0.8 PV were 1340 kPa, 241 kPa, and 1762 m/s for UCS, STS, and UPV, respectively, with an average calcite content of 16.2%. Overall, the 0.5 M cementation solution with a 24 h treatment cycle, 0.8 PV with 7 days, and 0.4 PV with 14 days gave optimum treatment solution, and showed heavily cemented and rock-type behavior of the biotreated‐sand sample. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.