Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/5845
Title: On-chip adaptive body bias for reducing the impact of nbti on 6t SRAM cells
Authors: Shah, Ambika Prasad
Vishvakarma, Santosh Kumar
Keywords: Bias voltage;Convergence of numerical methods;Degradation;Negative temperature coefficient;Reliability;Stability;Static random access storage;Stresses;Thermal variables control;Thermodynamic stability;Threshold voltage;Adaptive body bias;Body bias control;Circuit-level simulation;Elevated temperature;MOS-FET;SRAM Cell;Stand-by leakage;Threshold voltage degradation;Negative bias temperature instability
Issue Date: 2018
Publisher: Institute of Electrical and Electronics Engineers Inc.
Citation: Shah, A. P., Yadav, N., Beohar, A., & Vishvakarma, S. K. (2018). On-chip adaptive body bias for reducing the impact of nbti on 6t SRAM cells. IEEE Transactions on Semiconductor Manufacturing, 31(2), 242-249. doi:10.1109/TSM.2018.2804944
Abstract: Negative bias temperature instability (NBTI) is a major reliability issue with the scaled devices at elevated temperature. The effect of NBTI increases with the time, and it increases the threshold voltage of pMOS. In this paper, an on-chip adaptive body bias (O-ABB) circuit to compensate the degradation due to NBTI aging is presented. The O-ABB is used to compensate the parameter variations and improves the SRAM circuit yield regarding read current, hold SNM, read SNM, write margin, and word line write margin (WLWM). The O-ABB consists of standby leakage current ( ${I}-{{ddq}}$ ) sensor circuit, decision circuit, and body bias control circuit. Circuit level simulation for SRAM cell is performed for pre-and post-stress of ten years NBTI aging. The proposed O-ABB reduces the effect of NBTI on the stability of SRAM cell. The simulation results show the hold SNM, read SNM, and WLWM decreases by 10.55%, 8.55%, and 3.25%, respectively, in the absence of O-ABB, whereas hold SNM, read SNM, and WLWM decreases by only 0.47%, 1.15%, and 0.62%, respectively, if O-ABB is used to compensate the degradation. © 1988-2012 IEEE.
URI: https://doi.org/10.1109/TSM.2018.2804944
https://dspace.iiti.ac.in/handle/123456789/5845
ISSN: 0894-6507
Type of Material: Journal Article
Appears in Collections:Department of Electrical Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: