Please use this identifier to cite or link to this item: https://dspace.iiti.ac.in/handle/123456789/7372
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKumar, Rituneshen_US
dc.date.accessioned2022-03-17T01:00:00Z-
dc.date.accessioned2022-03-21T10:53:56Z-
dc.date.available2022-03-17T01:00:00Z-
dc.date.available2022-03-21T10:53:56Z-
dc.date.issued2011-
dc.identifier.citationKumar, R., Dhar, P. L., & Jain, S. (2011). Development of new wire mesh packings for improving the performance of zero carryover spray tower. Energy, 36(2), 1362-1374. doi:10.1016/j.energy.2010.09.040en_US
dc.identifier.issn0360-5442-
dc.identifier.otherEID(2-s2.0-79551530690)-
dc.identifier.urihttps://doi.org/10.1016/j.energy.2010.09.040-
dc.identifier.urihttps://dspace.iiti.ac.in/handle/123456789/7372-
dc.description.abstractThis paper presents the experimental results of chemical dehumidification of air by aqueous CaCl2 liquid desiccant. A new design of the spray tower for eliminating carryover without increasing the pressure drops has been done. New types of wire mesh packings have also been proposed for improving the performance of the conventional spray tower. Three different configurations of the wire mesh packings have been designed and tested to improve the performance of tower with least cost addition. Experimental results have been presented in terms of 'change in specific humidity', rate of moisture removal and tower effectiveness. Comparison of the experimental results of towers using these three packings with the conventional spray tower show improvement in the performance of spray tower (~30%) without mounting air side pressure drop burden. Mass flow rate of liquid desiccant, mass flow rate of air, inlet specific humidity of air, and concentration of desiccant solution are found to have major influence on the performance. © 2010 Elsevier Ltd.en_US
dc.language.isoenen_US
dc.publisherElsevier Ltden_US
dc.sourceEnergyen_US
dc.subjectAir conditioningen_US
dc.subjectCalcium chlorideen_US
dc.subjectDriers (materials)en_US
dc.subjectHigh pressure effectsen_US
dc.subjectHumidity controlen_US
dc.subjectInlet flowen_US
dc.subjectLiquidsen_US
dc.subjectMass transferen_US
dc.subjectPipe flowen_US
dc.subjectPressure dropen_US
dc.subjectWireen_US
dc.subjectAbsorberen_US
dc.subjectLiquid desiccanten_US
dc.subjectSpray toweren_US
dc.subjectWire mesh packingsen_US
dc.subjectZero carryoveren_US
dc.subjectTowersen_US
dc.subjectabsorbanceen_US
dc.subjectatmospheric pressureen_US
dc.subjectcomparative studyen_US
dc.subjectdesiccationen_US
dc.subjectexperimental studyen_US
dc.subjecthumidityen_US
dc.subjectperformance assessmenten_US
dc.subjectsprayen_US
dc.titleDevelopment of new wire mesh packings for improving the performance of zero carryover spray toweren_US
dc.typeJournal Articleen_US
Appears in Collections:Department of Mechanical Engineering

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: